AVR 161S
425 watt netværksparat lyd-/videoreceiver med 5.1 kanaler og Bluetooth-forbindelse
Getting started with your AVR 161S
Documents & Downloads
Specifications
- Power Requirement
- 220V - 240V AC, 50Hz/60Hz
- Dimensions (H x W x D – Metric/English)
- 121mm x 440mm x 300mm (4-3/4” x 17-5/16” x 11-13/16”)
- Weight (Metric/English)
- 4.6kg (10 lb)
- Stereo Power
- 85W per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz,
- Multichannel Power (one channel driven)
- 85W per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz,
- High Instantaneous Current Capability
- 29 Amps
- Signal-to-noise Ratio (IHF-A)
- 100 dB
- Slew Rate
- 40V/sec
- Input Sensitivity/Impedance
- 250mV/27k ohms
- Television Format
- PAL
- Input Level/Impedance
- 1Vp-p/75 ohms
- Output Level/Impedance
- 1Vp-p/75 ohms
- Video Frequency Response (Component Video)
- 10Hz – 8MHz (–3dB)
- 10Hz – 8MHz (–3dB)
- 2.0 + 3D ready
Denne højtydende A/V-receiver med 425 watt og 5.1 kanaler åbner nye forbindelser til dine foretrukne film, tv-programmer og musik. Nutidens underholdning lagres og leveres på vidt forskellige måder – fra eksterne harddiske til kabelbokse og smartphones. Hvis din receiver ikke understøtter disse medier, er den mere eller mindre ubrugelig. Med Harman Kardon®AVR 161S får du let forbindelse til alt det, du elsker. Denne netværksparate 425 watt A/V-receiver med 5.1 kanaler er spækket med adgangsmuligheder til dine medier. Den har fem 3D-kompatible HDMI® 2.0-indgange, herunder én med MHL. Så du har rig mulighed for at nyde indholdet fra din HD-kabelboks, Blu-ray™-afspiller eller dine MHL-kompatible bærbare enheder. Med Spotify Connect og HARMAN TrueStream Bluetooth®-teknologi kan du trådløst afspille hi-fi-lyd fra dine mobile enheder. AVR 161S indeholder den eksklusive Natural Sound Processing (NSP), som skaber fyldig og omsluttende surroundlyd fra enhver kilde, ikke mindst når du afspiller i stereo via nettet. Du får den bedst tænkelige lyd ud af dine højttalere og dit lyttemiljø med den nye EZSet/EQ™ III-proces, der automatisk kalibrerer systemet. Takket være HARMAN GreenEdge™-teknologien er AVR 161S endda miljøvenlig.
FAQs & How-Tos
-
Yes, this is correct. The AVR 1x1S does not support OSD on HDMI 2 out, only on HDMI 1. If customers want OSD on two HDMI outputs, they can buy the AVR 370.Was this helpful? Thank you for your feedback!
-
Yes, in the HDMI Setup Menu, it is possible to select either �Sound To TV� or �Sound To Amp�, Amp being the AVR. This detail is not mentioned in the owner's manual.Was this helpful? Thank you for your feedback!
-
Yes, download the Harman Kardon Remote app to do this.Was this helpful? Thank you for your feedback!
-
You can send any 4k video signal into the HDMI inputs of your AVR, and it will be sent to your TV screen from the HDMI output, either in 4k or 1080p. Sometimes it may be necessary to switch off the TV set, then switch it on again, to activate a new "handshake" between the devices, in order to open for the 4k signal, if normal HD 1080p signal was the last signal used. Please note that not all 4k signals can be viewed. Many streamed videos from Youtube will work, as will any 4k material that you have recorded yourself, and many TV boxes will work also. However, HDCP 2.2 protected material will not be shown in 4k, but will be converted to full HD 1080p signals, because these AVRs do not support HDCP 2.2 digital copy protection. HDR is not supported.Was this helpful? Thank you for your feedback!
-
We designed the USB folder data to show the latest modified folder and it is a design preference. It is not possible to change this setting.Was this helpful? Thank you for your feedback!
-
This is sometimes a problem with wired connections to computers or NAS drives. There is no way to change this, unfortunately.Was this helpful? Thank you for your feedback!
-
Typically when we are talking about projectors, they are normally installed in a place where the HDMI cable is too long, and the signal has a hard time reaching the AVR. It is also possible that the projector is not compatible with the AVR. To be sure it works with the AVR, please move projector closer and use a short HDMI cable. We recommend a cable that is 3 meters in length or less. If the projector works with the shorter cable, and you have no choice but to use a longer cable, you will need an HDMI repeater/amplifier/eq/booster (name varies depending on the manufacturer), to boost the signal so that it can make it all the way from the AVR to the projector.Was this helpful? Thank you for your feedback!
-
The Harman AVR App controls your receiver through your smartphone, which communicates via your wireless home network. Please make sure that your AVR is properly connected to your network router, with cable for the smaller models. If you have no wireless home network, you cannot use the app.Was this helpful? Thank you for your feedback!
-
Yes, on your computer, enter the IP address of the receiver in the internet browser. In the page that opens, it is possible to change the name.Was this helpful? Thank you for your feedback!
-
No, in order to go through the setup procedure, it is necessary to activate the (OSD) On-Screen-Display, and this is not possible on the front panel buttons, you need the remote control. Only the remote control features the necessary OSD button.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00