Support Overview / Home Audio / Receivers / Receivers - Surround Sound / AVR 510

AVR 510

Audio/Video Receiver With Dolby Digital & DTS (80 watts x 2 | 70 watts x 5)

Sold from 2000 until 2001

Predecessor Product:	AVR 500
Successor Product:	AVR 520
Made in:	Hong Kong

Documents & Downloads

Other

Specifications

Specifikationer

Power Requirements: AC 120V/60Hz

Power Consumption: 78 Watts idle, 694 Watts maximum (2 channels driven)

MSRP U.S.: $999.95 each

Lydspecifikationer

Continuous Average Power (FTC) per Channel (stereo mode): 80 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms

Front L & R Channels: 70 Watts per channel @ < 0.07% THD, 20Hz – 20kHz into 8 ohms

Center Channel: 70 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Surround Channels: 70 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Input Level/Impedance: 200mV/47k ohms - Linear (High-Level)

Signal-to-Noise Ratio: 95dB (IHF-A)

Analog Source Decoding: 40dB

Dolby Digital: 55dB

DTS: 55dB

Frequency Response: 10Hz – 100kHz (+0/-3dB @ 1 watt)

High Instantaneous Current Capability (HCC): ± 45 Amps

Transient Intermodulation Distortion (TIM): Unmeasurable

Rise Time: 16 µsec

Slew Rate: 40V/µsec

Surround Modes: Dolby Digital, DTS surround, Harman's Logic 7, VMAx & EzSet

Digital Inputs (coaxial/optical): 6

Digital Output: 2

Mål

Width: 17.3 inch (440mm)

Height: 6.5 inch (165mm)

Depth: 17.1 inch (435mm)

Weight: 35 lb (15.9kg)

Dimensions (H x W x D): 6.5 inch x 17.3 inch x 17.1 inch (165mm x 440mm x 435mm)

Videospecifikationer

Television Format: NTSC

Input Level/Impedance: 1Vp-p/75 ohms

Output Level/Impedance: 1V/75 ohms

Video Frequency Response: 10Hz – 8MHz (-3dB)

Tuner Specifications

Frequency Range: AM... 520 – 1710kHz

Frequency Range: FM... 87.5 – 108MHz

Signal-to-Noise Ratio: AM... 45dB

Usable Sensitivity: FM... IHF 1.3 µV/13.2dBf

Signal-to-Noise Ratio: FM... 70/68 dBA (Mono/Stereo)

Usable Sensitivity: AM... Loop 500µV

Distortion: AM... 1kHz, 50% Mod 0.8%

Distortion (Mono/Stereo): FM... 0.2%/0.3%

Selectivity: AM... ± 10kHz, 30dB

Stereo Separation: FM... 40dB @ 1kHz

Selectivity: FM... ± 400kHz, 70dB

Image Rejection: FM... 80dB

IF Rejection: FM... 90dB

Tuner Output Level: FM... 1kHz, ±75kHz Dev 500mV

The AVR 510 delivers the performance you expect from Harman Kardon without sacrificing ease of use. The patented EzSet; remote control takes the guesswork out of speaker setup, and sophisticated surround processing technologies deliver a variety of listening options. 192kHz/24-bit DACs insure compatibility with the latest program sources, while front-panel digital inputs, one of which can be switched to an output, deliver maximum flexibility. Component video, S-Video and multiroom/multisource connections make the AVR 510 one of the most versatile models ever offered by Harman Kardon.

FAQs & How-Tos

1 results

Sort

Page size

Why doesn't the AVR respond when I use the remote control, even though my other products work just fine?

The remote is only capable of operating one device at a time (unless you have programmed advanced functions such as Volume, Channel or Transport control Punch-Through). When you press the Source Selector to operate your other product, such as the DVD player, the remote cannot control any other product, including the AVR, until you press the AVR Button again. To avoid your problem in the future, always press the AVR Button or appropriate Source Selector before you enter any command.

Was this helpful? Thank you for your feedback!