How To
How To
1640 results
-
This connection is intended for software and service updates only.Was this helpful? Thank you for your feedback!
-
We recommend inserting the ear tips (L for left, R for right located at the end of the ear tip extension) in the ear first and then proceed to wrap the ear loop around your ear. Please make sure to try all three sizes to insure the most comfortable fit.Was this helpful? Thank you for your feedback!
-
The Bluetooth range varies. However, you should get up to 15 meters (just under 50 ft) when using the product indoors. If you are using the headphones outside, conditions vary based on surroundings and body mass. For the best connectivity results, please make sure that the device you are paired to is in the front of your body.Was this helpful? Thank you for your feedback!
-
Bluetooth range is normally up to about 10 m. More than that the signal will get unstable.Was this helpful? Thank you for your feedback!
-
A clip has been included to help ensure the best fit and security of the headphones. Placing the clip on the audio cord and attaching to the top back of your shirt you should be able to twist your head right and left without the clip pulling your ear.Was this helpful? Thank you for your feedback!
-
The Smart button activates Ambient aware settings: Off, Low, High.Was this helpful? Thank you for your feedback!
-
These two models have 40 mm speaker units.Was this helpful? Thank you for your feedback!
-
AURA Studio is a Bluetooth speaker plus microphone built-in, where AURA has Wi-Fi built-in for AirPlay, DLNA and Spotify Connect solutions.Was this helpful? Thank you for your feedback!
-
Dolby Atmos is an object-based surround sound format. Harman Kardon MultiBeam is a beam-forming surround sound system that creates a wide surround sound effect.Was this helpful? Thank you for your feedback!
-
100 is in-ear, 300 is on-ear, 700 is over-ear.Was this helpful? Thank you for your feedback!
-
You'll have all the benefits from HDMI 2.0, but with 2.0a you will also have HDR (High Dynamic Range). Don't confuse HDR with cameras, this is used for TV's that support HDR content. In short, if a Blu-Ray supports HDR, it can enhanced dark scenes from a movie with this option.Was this helpful? Thank you for your feedback!
-
The difference is that the new ECO versions of Go 3 and Clip 4 are made from 90% PCR (Post-Consumer Recycled) plastic and wrapped in 100% recycled fabric on the speaker grille, while still delivering the same rich JBL Original Pro Sound and significantly reducing the carbon footprint of the product.
Was this helpful? Thank you for your feedback! -
The JBL QuantumSURROUND algorithm is specifically designed from the ground up to work with JBL Quantum gaming headsets—the software perfectly complements the hardware for incredibly realistic immersion. JBL QuantumSURROUND provides a strong sense of externalization, meaning that sound feels like it’s coming from loudspeakers in a professional listening room—or from the game world around you. With other spatialized audio solutions, it still feels like the sound is coming from the headphones, or just outside of them.Was this helpful? Thank you for your feedback!
-
You can get the professional sound precision and accuracy with head-tracking enhanced JBL QuantumSPHERE 360™ on your PC while gaining sound immersion with JBL QuantumSPATIAL 360™ on your platform. JBL QuantumSPHERE 360™ is accessed through the USB-C dongle/adaptor on your PC passing through the QuantumENGINE. The JBL QuantumSPATIAL 360™ is accessed on consoles through the USB-C dongle/adaptor works without the JBL QuantumENGINE.Was this helpful? Thank you for your feedback!
-
The difference is the BTA unit, which is a Bluetooth transmitter. The Soundgear BTA comes with the BTA unit in the box. The Soundgear does not. The BTA can be connected (with a signal cable) to a TV set, a CD player, or any other stereo line-level source, and can then stream this signal to the Soundgear wirelessly, via Bluetooth. TV sound or game sound are possible, since the BTA and the Soundgear use aptX Low Latency, which reduces the audio delay to levels, where picture and sound will be closely synchronized. This is also the secret behind the option to connect two Soundgears to one BTA unit, for two people to share a TV transmission, or a video game. Actually, you can use the BTA to stream to most other Bluetooth headphones and loudspeakers, but only if these devices also support aptX LL will the delay be low enough for video use.Was this helpful? Thank you for your feedback!
-
In Standard mode, an unlimited number of PartyLight Sticks or PartyLight Beams can be connected to a PartyBox.
Stage mode can be switched on via the JBL PartyBox app.
In Stage mode at least 4 lights and a maximum of 32 Sticks can be connected to a PartyBox.Was this helpful? Thank you for your feedback! -
The physical battery in Boombox has a capacity of 10.000mAh @7.4V. This is the charged battery storage. When outputting ( so power from the battery is drawn ), it's using 3.7V, half the storage voltage, which will give you 74Wh - equivalent to a 20.000mAh battery with power stored at 3.7V.Was this helpful? Thank you for your feedback!
-
The BDS 335 system is a 2.1 sound system, and speaker set included in this version is HKTS 335 speaker system. The BDS 635 system is a 5.1 sound system, and speaker set included in this version is HKTS 635 speaker system. That is the only difference between these two systems.Was this helpful? Thank you for your feedback!
-
Since there is no fixed standard for headphone connections, there are two cables in the box, with different polarity. If one cable does not give good audio results, try the other cable. This usually solves the problem. The majority of phone models (Apple, Samsung from Galaxy S2 model, LG, HTC, Sony, Motorola, Blackberry) require the audio cable with the silver plugs. Pin assignment in this cable from the tip of the plug: R/L/Ground/Microphone. However, some manufacturers, such as some models from Nokia, require a cable with different pin assignment, (R/L/Microphone/Ground). In this case, you should use the audio cable with the black plugs.Was this helpful? Thank you for your feedback!
-
The Endurance Jump features the power hook which provides a secure fit ear hook design, which automatically turns the power on/off when putting on or taking off the earphones. The Sprint does not feature the power hook and you manually have to turn on/off the headphones by pressing and holding the JBL logo on the RIGHT ear hook.Was this helpful? Thank you for your feedback!
-
Wireless: Old name is Headphone Wireless. New name is Sport Wireless. Body is re-designed, the new body is smaller in diameter, but a bit longer. Angle of sound tube is changed slightly. Audio performance is improved. Enhancers slightly changed. Heartrate: Old name is Headphone Wireless Heartrate. New name is Sport Wireless Heartrate. Construction and design are unchanged.Was this helpful? Thank you for your feedback!
-
The only difference between the 500 and 700 series is that the 700 model provides you with a charging case. The features and functionality on the actual headphones themselves are the same.Was this helpful? Thank you for your feedback!
-
The only difference between the 500 and 700 series is that the 700 model provides you with a charging case. The features and functionality on the actual headphones themselves are the same.Was this helpful? Thank you for your feedback!
-
The SB 250 has optical and auxiliary connections, while the SB 350 has both connections along with HDMI ARC. The SB 250 has the JBL SoundShift feature (one-button switch between TV and Bluetooth connection), while the SB 350 does not. Compared to the SB 250, the SB 350 has a more powerful subwoofer amplifier. The bigger amp will provide listeners with more bass response.Was this helpful? Thank you for your feedback!
-
The distance between wall-mounts centers are: JBL BAR Studio: 45 cm. JBL BAR 2.1: 70 cm. JBL BAR 3.1: 70 cm. JBL BAR 5.1: 61 cm JBL BAR 5.1 Surround: 71.85 cm JBL BAR 9.1: 55,5 cmWas this helpful? Thank you for your feedback!
-
The Frequency response for the Citation series, except the subwoofer, is 50Hz to 20Khz.
Was this helpful? Thank you for your feedback! -
The EQ Button activates a special "wide stereo sound" effect. It does not affect bass settings. Turning EQ On/Off does not reset bass level to default value. User can adjust BASS in the Bass +/- control in the APP.Was this helpful? Thank you for your feedback!
-
Software version v.7.9 is the latest for the Flip 3Was this helpful? Thank you for your feedback!
-
JBL Bar 9.1 is 884 mm (without the surrounds in charging position). Surrounds add approx. 160 mm on each side, in charging position.Was this helpful? Thank you for your feedback!
-
The length from the Aux connector to the bottom of the button panel (cable only, excluding the connector and button panel) is approximately 90 cm.
The length of the cable that goes from the top of the button panel to the bottom of each earbud (cable only, excluding the earbuds and button panel) is approximately 29 cm.
The length of the earbuds are approximately 2 cm.
The length of the button panel is approximately 6.5 cm.
The overall total length is approximately = 127.5 cm.
Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
