How To
How To
-
The maximum video resolution of the No. 40 HDMI card is 1080i.Was this helpful? Thank you for your feedback!
-
The No.536 has several operational and standby modes - the measurements below represent typical values measured at 120VAC: Mode Typical Power Consumption Notes On 210 Watts With no input or output loading Normal (standby) 4.1 Watts/100 Watts Unpon initial power-up/After first use Power Save (Standby) 4.1 Watts Green (Standby) 0.3 Watts OFF 0 Watts Via rear panel switch Note that the No. 536 cannot be shut off by the front button – this is used only for switching the amp in/out of a standby mode. Also note that when set to the Normal standby mode, the amplifier will initially consume the same power as when in the Powersave mode but will change to a higher level after it is switched on for the first time.Was this helpful? Thank you for your feedback!
-
The No. 585 will deliver 350 watts into 4 ohmsWas this helpful? Thank you for your feedback!
-
The overall power rating is 630 W maximum power at 1% THD.
Was this helpful? Thank you for your feedback! -
With the speaker ON, press and hold the VOL+ and Pause/Play buttons for 5-6 seconds. The Xtreme shuts down, and is now reset. You will need to 'forget' the speaker in Bluetooth settings on your phone/tablet in order to pair it again.Was this helpful? Thank you for your feedback!
-
Speakers will dual tweeters gives listeners the ability to have a single speaker to drive two independent channels, ideally stereo left and right. Dual tweeter speakers are usually used for in-ceiling audio applications. They have four terminals (two sets of positives and negatives) used to plug in speaker wires from the amplifier.Was this helpful? Thank you for your feedback!
-
The range is approximately 10 meters, depending on the environment.Was this helpful? Thank you for your feedback!
-
The Omni 50+ rated power with AC power connected is 4 X 25 Watt. When using battery only, the rated power is 4 X 15 Watt.Was this helpful? Thank you for your feedback!
-
Both the OMNI BAR+ and its subwoofer have 200W of power amplification, which means that total system power is 400 W.Was this helpful? Thank you for your feedback!
-
These are the supported languages for the Everest GA series.
- English (US, UK, CA, IN, AU)
- German
- French (CA, FR)
- Japanese
- Portuguese (BR)
Was this helpful? Thank you for your feedback! -
This connection is intended for software and service updates only.Was this helpful? Thank you for your feedback!
-
Voltage is 100 - 240 Volt AC. Maximum power consumption is 120 Watts.Was this helpful? Thank you for your feedback!
-
Soundgear Sense provides two wearing styles, either as regular TWS headphones with an ear hook for a secure fit, or as a neckband headphone with the optional detachable neckband. Both wearing styles offer the same open ear experience with rich, full-range sound, it is just a matter of your own preference or use case which wearing style you choose.
Was this helpful? Thank you for your feedback! -
Now, with Google Assistant and Alexa available simultaneously on your JBL Authentics speakers, you can choose to use one or both voice services available. This means you can set up just Alexa, just Google Assistant, or both. If you choose to set up both services, they will be at the ready. You can use either of them whenever you want simply by saying either “Hey Google” or “Alexa”.
Was this helpful? Thank you for your feedback! -
Windows Sonic is a virtual surround algorithm that is built into Windows 10 PCs. You can read more here:
https://docs.microsoft.com/en-us/windows/win32/coreaudio/spatial-soundWas this helpful? Thank you for your feedback! -
Wireless Stereo Boost allows you to connect two of the same model speakers together for a more powerful listening experience.
To use this feature, hold the Bluetooth button on both speakers for more than 5 seconds.
The left & right channels can be swapped by tapping the Bluetooth button on the host speaker twice.
Was this helpful? Thank you for your feedback! -
The Onyx Studio 8 features Wireless Stereo Boost which allows you to connect two Onyx Studio 8 speakers together for a more powerful listening experience. Please note: You cannot connect the Onyx Studio 8 to other Onyx Studio speakers such as the Onyx Studio 7, 6 and 5.Was this helpful? Thank you for your feedback!
-
The JBL Quantum Stream microphone is compatible with the JBL QuantumENGINE software. You can customize or use the following settings/features via the JBL QuantumENGINE:
Microphone settings
Polar patters (Cardioid / Onnidirectional)
Equalizer
RGB LED Light colors + animations/effects
Update firmware + softwareWas this helpful? Thank you for your feedback! -
You can customize or use the following settings/features via the JBL QuantumENGINE:
Microphone settings
Polar Patterns (Directions that the Quantum Stream Studio picks up the sound)
Equalizer
Lighting settings
Update firmware and software
Was this helpful? Thank you for your feedback! -
Only data to make Google Assistant more efficient and Google services faster. When interacting with the speaker you will receive more personalized feedback in the future.Was this helpful? Thank you for your feedback!
-
The Vi headphones have a couple different sensors, including a touch sensor (for interacting with Vi), a gyroscope (for rotational motion), accelerometer (for movement or vibrations) and a barometer (for elevation / atmospheric pressure). Plus they house a “custom” sensor that uses visible-light and infrared LEDs along with photodiodes, all in the left ear bud, to determine your heart rate. The headphones can also talk to your iPhone/Android's GPS and Wi-Fi to help with figuring out location and other information.Was this helpful? Thank you for your feedback!
-
The Smart Case only supports English, so even if you change the language in the JBL Headphones app, it will remain in English.
Was this helpful? Thank you for your feedback! -
The JBL QuantumENGINE supports up to 20 languages. You can select the preferred language in the system section.Was this helpful? Thank you for your feedback!
-
The ear cushions are made of protein leather.Was this helpful? Thank you for your feedback!
-
Battery icon shows as full at 90%-100% battery remaining.
Battery icon shows as 2/3 full at 50%-90% battery remaining.
Battery icon shows as 1/3 full at 15%-50% battery remaining.
Battery icon shows as empty and flashing at 5%-15% battery remaining - the product should be charged now.
The speaker will switch off at 0% battery remaining automatically to preserve the lifespan of the battery.
Was this helpful? Thank you for your feedback! -
The JBL Quantum Stream mic is compatible with the following platforms:
PC (Windows)
PlayStation 4
PlayStation 5
Nintendo Switch
Mobile*
Mac
* Most newer phones are compatible.Was this helpful? Thank you for your feedback! -
The JBL Quantum 910 Wireless headset is compatible via 3.5mm jack with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR. You can use the USB connection with PC, PlayStation and Nintendo Switch.Was this helpful? Thank you for your feedback!
-
The JBL Quantum ONE headset is compatible via 3.5mm jack with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR. You can use the USB connection with PC.Was this helpful? Thank you for your feedback!
-
The JBL Quantum TWS an JBL Quantum TWS Air supports two types of wireless connection at the same time. It's compatible with any Bluetooth compatible devices while the USB wireless dongle enables compatibility with PC/Mac, PS4/5, Nintendo SwitchTM, TV and iPads and AndroidTM devices with USB-Connection (Note: Type-C supports PS5 while type-A is compatible with all PlayStationTM model).
Was this helpful? Thank you for your feedback! -
The Harman Kardon Wireless HD Audio System uses UDP ports 6060 and 6080.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
