The sensor is located in the LEFT ear bud. The left enhancer will feature a cut out for the sensor and should be fully exposed.

The heart rate sensor is located inside the RIGHT earbud inside the sound tunnel. If the Heart Rate detection is activated and you remove the RIGHT earbud, the audio voice will notify you to insert the ear bud and will recalibrate once it is detected again.

Under the little hole next to the phone reciever button.

On the BT and ELITE NXT series over-ear and on-ear models, the serial number sticker is on the inside of the headband left side, visible when the size adjustment is pulled all the way out. Serial numbers are also shown on the boxes. On ELITE 100 in-ear, it is on the box only.

The Serial Number is located on the strap hook (see image below), it may be necessary to remove the strap to see it clearly.

It is a tiny white sticker, located on the inside of the left-hand size adjustment slider on E35.

The soundbar support SBC codec.

Our LINK BAR supports the following:
MP3, AAC-LC, HE+ACC, FLAC, Vorbis, Wav, CELT/opus via Wi-Fi streaming, and with Bluetooth SBC and AAC.

The Harman Kardon Aura Studio 2 features: Bluetooth v.4.1 A2DP v.1.3 AVRCP v.1.5

C-Media 6632A Processor

For OMNI BAR+, three sources are available: HDMI (not applicable for ADAPT+), Optical or AUX input. For Adapt+ two sources are available: Optical in/outputs and Analog in/outputs. If you select "Watching movies and TV shows" in the HK controller app for either one of them, you will have a very little delay and good lip sync with the TV for video applications. However, you will not be able to rebroadcast the TV signal to other OMNI+ speakers when selecting this mode. If you select "Listening to music", you will be able to rebroadcast TV signal to other OMNI+ speakers in your house, however, you will have lip sync delay with video material. Select that specific mode if you use HDMI (not applicable for ADAPT+), Optical or AUX for music only. Using Chromecast, Spotify Connect or Bluetooth is not part of these modes. When using one of these streaming methods, you are able to rebroadcast any music source.

Connecting a USB stick

1. You can enjoy music from your USB Stick directly into the Partybox device.
2. Insert the Stick into theport, located on the back of your Partybox.
3. The USB Stick has to be formatted FAT16 or FAT 32 and supports MP3, WAVE and WMA Music files.
4. It will start automatically playing the content on your USB stick.

AUX Connection

1. You can connect any devices through the analog connection
2. Use an analog cable (Not included in the box) and connect your device.
3. Press play on your external device and enjoy the music!

RCA Connection (*Partybox 200/300/1000 Only)

1. The Partybox features both Input and Output RCA connection.
2. Connect your RCA cable (not included) to either one of the ports.
3. You can use it with your DVD/BlueRay player or AVR system.

Guitar and Microphone

1. Connect your to the dedicated port or connect your electric   to the
2. You can mix sound or make your own karaoke party with your Partybox.
3. Sing or play through your devices.
   1. To adjust the volume of the audio source, press volume+ or volume- buttons.
   2. To adjust the volume of the microphone or guitar, rotate the or

 

Charging external devices

1. Whenever your mobile device needs some extra power, the Partybox can help you!
2. Featuring a USB Charging port for both Music (USB on a stick) or when you need to charge your device.
3. Simply connect your device to the port and start charging.
   1. NOTE: The Partybox 200 needs to be connected to AC power all the time to charge or function as a speaker.
   2. The Party 300/310 has a battery and can charge any device without needing AC power (unless the product's battery is depleted then you need to recharge via AC power).

There are many ways to enjoy your JBL Partybox On-The-Go, 100, 200, 300, 310 & 1000. The options are endless and you are in control of the party

The N90Q can process these formats through the digital input: - 2-channel - Sample Rate: 44.1K / 48KHz / 96KHz - Bit Resolution: 16 bit / 24 bit

Enchant series information

The Enchant series is not only a beautifully designed speaker, but it also delivers the sound to a completely new level.
Always wanted to have Surround Sound, but never wanted extra speakers, with the MultiBeam feature you can get Surround Sound experience right at your fingertips.

Enchant 1300 for Bigger rooms

1. Perfect for bigger rooms that requires a bit more sound and punch when watching or listening to music!
2. Powerful sound with 13 Channels in one speaker with a maximum of 240W

2. Features MultiBeam technology for Surround Sound experience.
3. 4K HDR10 compatible on both HDMI Inputs and output (ARC).
4. HDCP 2.2 Compatible
5. Google Cast built-in, stream your favorite music through your Wi-Fi connection.
6. Bluetooth 4.2 technology for easy streaming with any of your mobile devices.
7. And much more!

Enchant 800 for Smaller rooms

1. Perfect for smaller rooms to extend the sound performance in any situation.
2. Powerful sound with 8 Channels in one speaker with a maximum of 180W

2. Smaller in size compared to Enchant 1300, but just as an amazing sound.
3. Features MultiBeam technology for Surround Sound experience.
4. 4K HDR10 compatible on both HDMI Input and output (ARC).
5. HDCP 2.2 Compatible
6. Google Cast built-in, stream your favorite music through your Wi-Fi connection.
7. Bluetooth 4.2 technology for easy streaming with any of your mobile devices.
8. And much more!

Model HTFS 2 is used for the satellite speakers in these two BDS systems. There is no floor stand for the center speaker in the 635 system.

The BDS system supports a variety of audio and video formats. Listing all disc, surround and codec formats is beyond the scope of an FAQ. Please donwload the Owner's Manual from the harman.com website for a full list.

All of our in-wall/in-ceiling speakers are designed to be used in a wall without the need for a back-box. The specs provided are based on no back-box. However, when adding a back-box (really only possible when doing new construction), you will improve the low frequency response a bit, getting a tighter bass response.

JBL Xtreme, JBL Pulse 2, JBL Charge3, JBL Flip 3, Pulse 3, and Flip 4 Android, Google Now, Google Play are trademarks of Google Inc. Siri, iTunes, and Apple Music are trademarks of Apple Inc. Spotify is a registered trademark of Spotify AB. IOS is a registered trademark of Cisco in the US and is used by Apple under license.

The first JBL speakers featuring the JBL Connect technology are: JBL Flip 3, JBL Pulse 2, JBL Xtreme, JBL Boost TV and JBL Charge 3, SB 450 A firmware upgrade is available for the JBL Charge 3 ,which will upgrade Connect to JBL Connect+. After this fw upgrade, it is no longer possible to connect the Charge 3 with other products which have JBL Connect ( Flip 3, Boost TV, Pulse 2, Xtreme )

NOTES

• Only file names that contain numbers or English characters can be displayed, otherwise “UNKNOWN” will be displayed.
• “UNSUPPORTED” is displayed when the file format is not supported.
• Do not extract the USB device while in operation.
• For a large capacity USB, it may take longer than a few minutes to be searched. USB with more than 2000 files cannot be supported.
• Devices which require additional program installation connected to a computer are not supported.
• The USB port of the soundbar cannot be connected to a computer and it cannot be used as a storage device.
• The exFAT and NTFS file system is not supported. FAT16/FAT32 systems are available.
• Depending on some devices, it may not be available to recognize the followings on the soundbar: External HDD; Card readers; Locked devices; Hard type USB devices; USB hub; Using USB extension cable; iPhone/iPod/iPad; Android device.

JBL Quantum 300, 350, 360P/X, 400, 600, 610, 800, 810, 910, 910 P/X, ONE, TWS, TWS Air, Stream, Stream Talk, Stream Studio and Stream Wireless are working with the QuantumENGINE.

Harman Kardon speakers that have the Wireless Dual Sound feature (stated on package) are compatible with the Go + Play Mini.

HTFS 3 will match these speakers sets: HKTS 20, HKTS 30, HKTS 60, HKTS 65 and HKTS 200. HTFS 2 will match these speakers sets: HKTS 9, HKTS 16 and HKS 4 satellite speakers.

It is a model made for vocal use.

BDS 280S and 580S support 802.11b, g and n. (2.4GHz ISM Band, Europe 13 Channels).

OSD is not available on HDMI Output 2

If you are unable to get test noise output per channel from the SDP75, the Clock Source is likely set to "External". Changing the Clock Source to "Internal" should prove to fix the issue.

The “Speaker” mode allows the JBL QuantumENGINE to receive more than two channels of audio. It also prevents some applications from adding extra signal processing intended for other headphones, which would negatively impact the performance of the JBL QuantumSURROUND or JBL QuantumSPHERE 360 technology.

The “Speaker” mode allows the JBL QuantumENGINE to receive more than two channels of audio. It also prevents some applications from adding extra signal processing intended for other headphones, which would negatively impact the performance of the JBL QuantumSURROUND or JBL QuantumSPHERE 360 technology.

To ensure the best sound experience, the battery performance of the Onyx Studio 9 is adjusted under the following conditions:

1. The speaker is in battery mode and the battery level is below 30%.

2. The music volume is at or above 50%.

To charge your device, try plugging in the AC cable or lowering the music volume.