How To
How To
1640 results
-
No. Bluetooth does not work under water. The Endurance DIVE however has a built-in MP3 player for music, and is IPX7 waterproof. This means you can use the headphones submerged to 1 meter depth, up to 30 minutes at a time. Also note that for normal swimming, you won't be submerged all the time, so the headphones should be waterproof for the duration of your swim.Was this helpful? Thank you for your feedback!
-
For the best PartyLight Stick and PartyLight Beam performance, connect it by using a JBL Auracast™-enabled PartyBox models such as the PartyBox Club 120, Stage 320 and Ultimate.
Was this helpful? Thank you for your feedback! -
It is not possible to connect further speakers (center or rear) to the system.
The Harman Kardon Radiance 2400 is a 2.1 sound system. With it's unique sound characteristics and sound dispersion, it can fill a large room with high quality sound.Was this helpful? Thank you for your feedback! -
You can change the JBL Pulse lightshow via JBL Portable app.
1. Connect the Pulse with your phone, open the JBL Portable app and wait for app to recognize your speaker.
2. Click the Lightshow button to enter the lightshow set-up
3. Swipe left and right to change lightshow
4. Swipe to customized page, to select your favorite pattern and customize your lightshow
5. Click the color wheel to change color or enter camera color picker
6. Click the brightness button to adjust brightness of the lightshow
Was this helpful? Thank you for your feedback! -
On the bottom panel, rotate the battery cover into the unlocked position and remove the cover. Press the battery clip visible on the back side of the battery compartment to allow the existing battery to come out. Then insert the new battery in the slot with the + side visible (facing up), and install the battery cover again. Rotate the battery cover to lock it into place.
Was this helpful? Thank you for your feedback! -
In the customized lightshow, you can select up to 3 patterns, however; the preset color cannot be changed. You can always adjust the lightshow brightness.
Was this helpful? Thank you for your feedback! -
1. In order to change the name of the speaker, you must first connect your speaker via Bluetooth and then download the JBL Connect app.
2. Once the app is downloaded choose app and wait for it to recognize your device.
3. Now that your speaker is highlighted, choose the gear located either below or to the right of the speaker image.
4. Once you choose the gear you will have the option to edit the name by clicking on the small pencil icon.
5. After you change the name, you will see a notification stating to "Reconnect to Apply New Name"
6. Go to your Bluetooth settings select "Forget This Device" and then reconnect to establish the new speaker name.Was this helpful? Thank you for your feedback! -
Yes, you can use the headset while charging!Was this helpful? Thank you for your feedback!
-
Yes, it's normal to get warm during charging. The InfinityLAB charger features over temperature protection to ensure your usage is safe.
Was this helpful? Thank you for your feedback! -
InstantGo 10,000 with a built-in USB-C cable and InstantGo 10,000 Wireless should be able to charge your laptop.
However, it may not apply to laptops that require output power of more than 30W.
Please check your laptop requirement before charging it with our devices.
Was this helpful? Thank you for your feedback! -
The InfinityLAB charger will not damage your device while charging.
The InfinityLAB charger will deliver the power your device needs during charging, and the InfinityLAB charger features auto protection against overheating, overcurrent, and overvoltage.Was this helpful? Thank you for your feedback! -
Our InfinityLab power bank should work with most cases in the market, and it depends on the design of the protected case/cover.
However, if your case’s bottom surface is thicker than 3mm, it may impact your wireless charging experience, and we recommend taking off the protected case/cover for the best charging experience.
If your phone case/cover has a metal plate on the back, it will not charge your device since it is a security feature of the FOD (Foreign object detection). This means our Infinity Lab Qi-certified power bank can detect if a foreign object, such as metal, is on its surface. If that happens, the wireless charger either stops charging or does not start charging at all.
Was this helpful? Thank you for your feedback! -
To charge the headphones, place inside charging case. While charging, both LEFT and RIGHT ear bud will display a sold red light. Once the headphones are fully charged. The red light will turn OFF. When the charging case is fully charged, the white LED's will light up accordingly. Battery life can last for 10-hours per charge. You may recharge your earphones for another 40-hours playtime with the charging case. It takes 2 hours to fully charge the charing case.Was this helpful? Thank you for your feedback!
-
You will need to dry the charging port completely before plugging in power for charging.
Was this helpful? Thank you for your feedback! -
It will take about 4 hours to fully charge the InfinityLab ClearCall speakerphone using a charger that supports 5V 2A.Was this helpful? Thank you for your feedback!
-
USB-A output doesn’t support PD fast charging. To enjoy PD fast charging and with your device support, please use USB-C output (if your InfinityLab device has a USB-C output).
Was this helpful? Thank you for your feedback! -
We suggest picking one way to charge your phone, so either charge your phone through wireless charging or wired charging. You cannot charge one device using both options at the same time.
Was this helpful? Thank you for your feedback! -
100W, 65W and 30W InfinityLAB chargers can fast charge USB-C equipped laptops.
The 100W charger supports laptops that require output power no more than 100W.
The 65W charger supports laptops that require output power no more than 65W.
The 30W charger supports laptop that require output power no more than 30W.Was this helpful? Thank you for your feedback! -
CITATION 300 & CITATION 500
Software Update Release Notes
------------------------------------------------------------------------
Version: 93641 / MCU: 0.2124.2
Release Date: August 22, 2022
Release Media: OTA (over the air) Automatic Upgrade
What’s New- Fixed a grouping issue with other Chromecast built-in speakers
- Resolves the issues with the "Google Home" app when used with an Android device.
- Other bug fixes and improvements
Was this helpful? Thank you for your feedback! -
CITATION MULTIBEAM 700
Software Update Release Notes
------------------------------------------------------------------------
Version: 93690 / MCU: 0.2122.5
Release Date: August 22, 2022
Release Media: OTA (over the air) Automatic Upgrade
What’s New- Fixed a grouping issue with other Chromecast built-in speakers
- Resolves the issues with the "Google Home" app when used with an Android device
- Improved HDMI compatibility with some TV's
- Current bass level is now shown on screen when adjusting with the remote control
- Other bug fixes and improvements
Was this helpful? Thank you for your feedback! -
General information about WiSA:
WiSA is a wireless system designed specifically for audio and speakers. An audio system that incorporates WiSA technology has it's own internal wireless system. It is capable of doing 96kHz/24bit audio with an audio latency of only 5ms, virtually undetectable by the human ear.
For more information on WiSA technology, please go to the official WiSA website.
If a product is WiSA Certified, it can be used with any other WiSA certified product. For example a WiSA Ready TV with at transmitter.
Note: The overall sound quality is dependent on the processing and setup in the WiSA TV & transmitter, and may result in a performance (EQ, crossover and levels) not intended by the speaker manufacturer. To be sure that the Citation products sound the best, use a Citation Bar product as the main "hub".
Harman Kardon Citation Surrounds
WiSA Certified products:
Harman Kardon Citation Sub
Harman Kardon Citation Sub S
Harman Kardon Citation Towers
Harman Kardon Citation Bar
Products making use of WiSA technology (not certified):
Harman Kardon Citation Multibeam 700
Harman Kardon Citation Multibeam 1100
Harman Kardon Citation Amp
Harman Kardon Surround
WiSA does not offer 3D audio formats like Dolby Atmos, and DTS:X yet, so at the moment it is limited to 5.1 or 7.1 Dolby Digital. So regardless of which brand of WiSA speaker you choose, Dolby Atmos will not be available yet.
Limitations:Was this helpful? Thank you for your feedback! -
The ear-tips can be removed and washed in luke-warm water with a little dish soap. Do not put the headphone into water, it may dried of with a moist cloth. If cloth and a little water doesn't clean sufficiently, use the cleaning-tool which has a brush and scraper to do the job properlyWas this helpful? Thank you for your feedback!
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all True Wireless Stereo earphones and cases.Was this helpful? Thank you for your feedback! -
It can fast charge almost anything with a USB-A or USB-C cable—phones, earbuds, power banks, cameras, even your laptop or gaming console.Was this helpful? Thank you for your feedback!
-
This product is not supported by Connect + or Partyboost on the JBL Portable app. They cannot connect to other portable speakers wirelessly.Was this helpful? Thank you for your feedback!
-
The BDS 235 and 535 owner's manual states that you need an ADAPT to make your system wireless. You do it by connecting the BDS system's analog outputs to the ADAPT's analog AUX input. The ADAPT will then re-stream to your OMNI speakers wirelessly. However, if you listen to the OMNI speakers, and want to listen to the music directly from the BDS system at the same time, there will be a delay in the sound from the OMNI speakers. The BDS speakers will play the music first, and since the ADAPT needs to process the data wirelessly, a delay results. To avoid delay, please mute the BDS system, or connect from the ADAPT line-out to the BDS AUX in instead of the other way around. With this setup, you can only play to the BDS from an OMNI speaker, which will not be delayed in sound.Was this helpful? Thank you for your feedback!
-
The ADAPT+ is made to connect an external subwoofer. The subwoofer needs to be an active device, which means that it must have its own, built-in amplifier.Was this helpful? Thank you for your feedback!
-
It is possible to connect a turntable to the AUX input of the Radiance 2400. Depending on the turntables output specifications, a phono-preamplifier will in most cases be necessary to connect in-between.Was this helpful? Thank you for your feedback!
-
If the remote control stopped working, please check if the batteries are drained. If so, replace them with new ones.
The remote control may have failed to connect with the digital hub. On the touchscreen, tap “Options” > “Remote Control”, then follow the onscreen instructions to pair with the digital hub again.Was this helpful? Thank you for your feedback! -
It is very simple to connect to your Car with the JBL Partybox 200 or 300. Use the included cable that connects through the cigarette connector in your Car and power on the Partybox! Please note that the 12V connection does not charge the battery in the Partybox 300 - it will only power the Partybox when in use. To charge the battery, it will have to be plugged into AC power ( 110 - 230V )Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
