JBL PartyBox Encore Essential 2
Bærbar festhøjttaler med kraftfuld lyd, dynamisk lysshow, op til 15 timers spilletid og håndtag, så den er lige til at tage med.
Getting started with your JBL PartyBox Encore Essential 2
Documents & Downloads
Specifications
- Transducere
- 1 x 5,25" (135 mm) bashøjttaler, 2 x 0,75" (20 mm) kuppel-diskanthøjttalere
- Udgangseffekt
- 100 W RMS (IEC60268)
- Strømindgang
- 100-240 V ̴ 50/60 Hz
- Frekvensområde
- 40 Hz - 20 kHz (-6 dB)
- Signal-støj-forhold
- >80 dB
- Produktmål (B x H x D)
- 319,5 mm x 342 mm x 260,4 mm
- Nettovægt
- 6,2 kg
- Pakkens mål (B x H x D)
- 400 mm x 365 mm x 350 mm
- Bruttovægt
- 8,25 kg
- USB-format
- FAT16, FAT32
- Bluetooth®-version
- 5.4
- Bluetooth®-profil
- A2DP V1.4, AVRCP V1.6 (SW), TMAP 1.0, PBP 1.0
- Bluetooth®-senders frekvensområde
- 2,402 GHz ~ 2,4835 GHz
- Bluetooth®-effekt for sender
- ≤ 16 dBm (EIRP)
- Bluetooth®-sendermodulation:GFSK, π/4-DQPSK, 8-DPSK
- USB-understøttede formater (ikke i EMEA-regionen)
- .MP3, .WAV, .FLAC
- Indgangsfølsomhed:
- Aux In
- 370 mV RMS (stik på 3,5 mm)
- Mikrofonindgang
- 20 mV RMS
- Guitarindgang
- 100 mV RMS
- Bluetooth/USB-indgang
- -9 dBFS
- Batteritype
- Li-ion-batteri, 34 Wh (7,4 V/4722 mAh)
- Batteriopladningstid
- < 3,5 timer (med højttaler slukket)
- Musikspilletid
- Op til 15 timer (afhænger af lydstyrke og indhold)
- Kabeltype
- Vekselstrømskabel (type afhænger af område)
- Kabellængde
- 2,0 m
- USB-lade-output
- 11 V / 2 A (maks.) (med højttaler slukket)
Bring star power til din næste fest
Tænd for JBL PartyBox Encore Essential 2, og lad festen begynde. Med denne bærbare højttaler vil du elske at være DJ ved alle events - takket være den lækre JBL Pro Sound, et lysshow, der matcher stemningen, og en mikrofon til at sprede ekstra glæde. Mærk lyden i brystet fra de episke højder og den dybe bas, uanset om du spiller en ny popballade eller går med et klassisk langsomt jam. Når du har klaret lydprøven, er det tid til at skrue op for stemningen med et lysshow, der danser til dine beats. Fra åbne tage til overfyldte kældre – JBL PartyBox Encore Essential 2 klarer det hele med IPX4-stænksikkert design og et håndtag, så den er lige til at tage med. Hvad er bedre end en JBL PartyBox Encore Essential 2? To! Par den for ægte stereovibes, eller forbind den med andre JBL Auracast™-aktiverede højttalere for at få en endnu vildere dansefest. Hold den gode stemning kørende på en enkelt opladning med op til 15 timers spilletid. Gør stemningen perfekt med JBL PartyBox-appen, hvor du kan styre din playliste, tilføje sjove lydeffekter og vælge den perfekte lysshowstemning – alt sammen mens du hopper rundt på dansegulvet. Uanset lejligheden sørger JBL PartyBox Encore Essential 2 for at få alle følelserne frem.
FAQs & How-Tos
-
It is possible to pair two of the same model of JBL PartyBox speakers together through TWS (True Wireless Stereo) mode.
PartyBox On-The-Go*/On-The-Go Essential*/100:
Connect just the left PartyBox with the chosen device first, with the right PartyBox turned off. The speaker that is connected first will automatically be the left channel. Now turn the right PartyBox on and continue with TWS pairing (detailed below).
*The PartyBox On-The-Go and PartyBox On-The-Go Essential are compatible with each other in TWS mode.
PartyBox 200/300/1000:
A button (L/R) on the rear of the speakers is used to assign the correct channel to the speakers after pairing is made.
In order to activate TWS mode, press and hold the Bluetooth button on the first speaker until the notification chime sounds, about 5 seconds. Then press and hold the Bluetooth button on the second speaker until the notification chime sounds (as seen below). TWS mode is now activated. To disable TWS, press and hold the Bluetooth button on either speaker, or power off one speaker.
Partybox 110/310/710/Encore/Essential:
Press the buttons labelled TWS on both speakers to connect the speakers in TWS mode (pictured in item 2 in the image below, with two speakers on the button).
TWS can be activated and deactivated remotely in the JBL Partybox app, in addition to assigning the left and right channels to the correct speakers.
Once the TWS connection is setup, it will be in Stereo mode by default if both speakers are the same model, otherwise the speakers will be in Party mode by default if different Partybox models are used. You can also switch between Stereo and Party mode in the JBL PartyBox app if two of the same Partybox models are used.
Please note: In order to achieve TWS mode, the speaker must be the same model with the exception of the PartyBox 200 & PartyBox 300, and PartyBox On-The-Go & PartyBox On-The-Go Essential which can be paired together via TWS. You cannot achieve TWS with a PartyBox 1000 and a PartyBox 300. You cannot achieve TWS with a PartyBox 100 and PartyBox 200. However, it is possible to connect a maximum of two of either the JBL PartyBox app compatible models (PartyBox 110, 120, 310, 320, 710, Encore or Encore Essential) together in Party mode - the two speakers then do not need to be the same model, but Stereo mode will not be possible.Was this helpful? Thank you for your feedback! -
The JBL Wireless Microphone set allows 2 x wireless microphones* to be connected to any PartyBox model ** through the use of a dongle connected to the Mic input. Additionally, a 3rd wired microphone - like the JBL PBM100 Wired Microphone, can also be connected to the switchable Guitar/Mic 2 input (only available on some PartyBox models). This will also work when using the non-switchable Guitar input on other Partybox models - however, this will bypass the karaoke effects including echo for the connected microphone and would generally have a slightly different sound character/timbre to a microphone connected to the Microphone input.
*This includes the PartyBox On-The-Go, a maximum of 2 wireless microphones can be connected and used simultaneously. The standard bundled PartyBox On-The-Go microphone can only be connected to the PartyBox On-The-Go that it came bundled with, it also cannot connect wirelessly to any other PartyBox models or portable speakers other than the PartyBox On-The-Go that it came bundled with. Only one standard, bundled PartyBox On-The-Go wireless microphone can be connected at a time, unless the JBL Wireless Microphone is purchased (sold separately), a spare part will only work as a replacement, not simultaneously.PartyBox Model Mic Arrangement Ports Used MAX ** Encore 1 Wireless (pre-paired, included) OR 2 Wireless (sold separately, second microphone needs to be manually paired as described in Owner's Manual) N/A - Wireless (pre-paired, no Wired Microphone port) 2 Encore 2 1 Wireless (pre-paired, included) an extra mic from the Partybox Mic set can paired, without using the dongle Has one Guitar Input, which a wired mic could be connected to, but mic controls do not control this input. 2 (3 if you connect one to the guitar input.) 100/110/Encore Essential 1 Wired OR 2 Wireless (Wireless Microphone Set must be used, sold separately) Mic Port 2 200 1 Wired OR 2 Wireless (Wireless Microphone Set must be used, sold separately) Mic Port 2 300 1 Wired OR 2 Wireless (Wireless Microphone Set must be used, sold separately) Mic Port 2 120/310/310 MC*/320/710/Ultimate 1 Wired AND 2 Wireless (Wireless Microphone Set must be used, sold separately) Mic Port AND Mic/Guitar Port 3 1000 1 Wired OR 2 Wireless (Wireless Microphone Set must be used, sold separately) Mic Port 2 On-The-Go/On-The-Go Essential 1 Wired AND 1 Wireless (pre-paired, included)
OR
2 Wireless (Wireless Microphone Set must be used, sold separately)Mic Port AND N/A - Wireless (pre-paired)
OR
Mic Port (pre-paired microphone will not work simultaneously when dongle used)2
OR
2* Partybox 310 MC - is a standard Partybox 310, which comes bundled with 1 x Wired Microphone (PBM100).
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00