JBL Control X Wireless

JBL Control X Wireless

Kraftfulde og trådløse Bluetooth®-stereohøjttalere med udvidelsesmulighed - til brug i hjemmet eller på farten

Sold from 2016 until now

Getting started with your JBL Control X Wireless

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Specifications

Finish
Graphite / White / Red
Rated Power
30W per channel RMS (AC mode)
Signal-to-noise ratio
>75 dB
Power supply
AC 100-240 VAC, 50-60Hz
Battery Type
Lithium-ion Polymer (7.4V, 2600mAh)
Battery Charge Time
2.4 hours @ 0.5C
Playback Time
Up to 4 hours (varies by volume level and audio content)
Bluetooth® Transmitter Power
0-4 dBm
Bluetooth® Transmitter Frequency Range
2.402 – 2.480 GHz
Bluetooth® Transmission Range
Up to 10m (from source)
Speaker Range
Up to 30m (between primary and secondary speakers)
Dimensions
9-1/4" x 6-1/2" x 6-1/4" (235mm x 165mm x 159mm)
Frequency Response
62Hz - 20kHz (-6db)
Weight (kg)
2.95 kg
Weight (lb)
6.5 lbs
High-Frequency Transducer
1" (25mm) CMMD® Lite dome tweeter

Rock the house inside and out

Løft dine foretrukne musiknumre, film, tv-udsendelser og spil til nye højder med de prisvindende JBL Control X Wireless-højttalere. Dette bærbare Bluetooth®-højttalersæt giver dig omsluttende stereolyd helt uden kabler. De kompakte højttalere er skabt til at levere forbløffende lyd overalt i dit hjem. Og når det er tid til at fortsætte festen udenfor, er den robuste konstruktion klædt på til enhver situation. Hvis du ønsker et bredere lydbillede, skal du blot tilføje et ekstra par Control X Wireless-højttalerne (sælges separat), så du kan spille samtidig på op til fire højttalere.

Afspil trådløst via Bluetooth® - eller brug den bageste 3,5 mm indgang for at spille i stereo eller mono. Til forskel fra andre stereohøjttalere er her intet behov for kabler mellem højttalerne. Brug én eller begge højttalere i eller uden for hjemmet - uden de begrænsninger, der følger med en sender eller en kablet tilslutning.
Du bliver festens midtpunkt med 30 watts uhæmmet kraft fra hver højttaler. Mens andre aktive højttalere forvrænger lyden ved høje niveauer, leverer JBL Control X Wireless-højttalerne ren og uforvrænget lyd ved enhver lydstyrke. Giv dig til kende - højt og klart.
"Hear the truth". Den patenterede bølgeretningsteknologi skaber samme levende stereobillede og detaljerigdom som i verdens mest berømte lydstudier, natklubber, koncertsale, teatre, spillesteder og stadioner. JBL Control X Wireless-højttalerne er simpelthen skabt til at gengive førsteklasses præstationer - lige for ørerne af dig.
Alle elsker bas. JBL har en lang historie, når det gælder design af transducere og akustik – og det er Control X Wireless et godt bevis på. Vi anvender bevidst et stift keglemateriale, der spiller sammen med vores patenterede Slipstream-justerede port på bagsiden. Resultatet er et stramt og kraftfuldt beat - uanset musikgenren.
JBL Control X Wireless-højttalerne er designet til at få det bedste ud af din musik - overalt. Disse højttalere er klar til at rocke dit hjem, dit kollegieværelse, dit kontor - og enhver gade, park, campingplads, strand eller fest. Bagporten gør ekstra nytte som et praktisk bærehåndtag.
Op til fire Control X Wireless højttalere kan tilsammen levere et kæmpestort og udvidet stereobillede, eller du kan fordele monolyden over et stort område uden behov for kabler mellem højttalerne (ekstra højttaler-par sælges separat).

FAQs & How-Tos

16 results
  • No. Although the Control X Wireless have a rugged exterior and are portable, they are not all-weather speakers. Any direct exposure to harsh weather condition (rain, snow, extreme hot/cold temperatures) will damage the speakers.
  • No, you can only have one activate device connected to the speaker. Please un-pair your current Bluetooth device, then connect with another device if needed.
  • Please note that although the Wireless version of Control X does have a threaded insert for brackets, JBL offers no brackets. The brackets for the Control X passive model cannot be used with the wireless version. Brackets for the wireless version must be custom made.
  • Yes, on the master speaker (the one with playback buttons), simply press the Reverse and Forward Play buttons at the same time for 3 seconds. Please note that after you have performed the reset procedure, master and secondary speakers are no longer connected. Go to the owner's manual page 4, the section "speaker association", to pair the secondary and master again.
  • Yes, that’s the best part about this speaker, there are so many options. Besides streaming over Wi-Fi, the JBL Control Xstream also offers a Bluetooth connection and an AUX input
  • No, the connection between our Control XT wireless speakers are established through Wi-Fi connection, running on 2.4 GHz network. The only time you will use Bluetooth, is when you connect to the primary speaker and start streaming music.
  • Random flashing is an indication that the wireless link between primary and associated speakers was lost and recovered. If this happens too often, it may be caused by interference in the 2.4 GHz ISM band, caused by overcrowding of the band. Sometimes it helps to change location of the speakers, or to shut down other 2.4 GHz devices.
  • Look at the back of the primary speaker, which is the one with pause/play and volume controls. You will see a switch called "mode". This switch can be in either S or P position. S stands for Secondary, P stands for Primary. Switch to Primary, and your speaker will now open Bluetooth and will accept analog signals. (The Secondary position is used for systems where four speakers are in use, since only one speaker can act as primary speaker.)
  • Our Control X Wireless speakers use Wi-Fi 2.4 GHz network to connect them. If there are any obstacles or people blocking the connection, it can cause interference. We suggest positioning the speakers on a high-level surface or shelf, to avoid any interference.
  • When the secondary speaker gets out of range, audio disappears, but there is no indication that the transmission is out of range, other than silence. Once they get within range again, the front panel LED blinks a few times, indicating that connection has been re-established. During normal operation, random blinking can be experienced, which is an indication of the wireless link having recovered from interference.
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00