JBL PartyBox 300
Bærbar Bluetooth party-højttaler med lyseffekter
Sold from 2019 until now
Getting started with your JBL PartyBox 300
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Udgangseffekt (W)
- 240
- Dynamisk frekvensområde (Hz)
- 45Hz-20kHz
- Mål (cm)
- 31 x 69 x 32
- Mål (inch)
- 12.2 x 27.2 x 12.6
- Vægt (kg)
- 15.84
- Vægt (lbs)
- 34.9
- Bluetooth-profiler
- A2DP V1.3, AVRCP V1.6
- Bluetooth-frekvens
- 45Hz-20kHz
- Ladetid (timer)
- 5
- Spilletid (timer)
- 18
- 3,5 mm lydindgang
- Ja
- Bluetooth
- Ja
- Charging cable
- Ja
- Lysshow
- Ja
- Powerbank
- Ja
- Wireless
- Ja
- Den berømte JBL-lyd
- Ja
- Genopladeligt batteri
- Ja
- Note
- The product is in compliance with the European Union energy legislation. 1) Bluetooth connection mode - The product is intended to be used for streaming music via Bluetooth connection. A consumer can stream Bluetooth audio to the speaker. When the product is connected through Bluetooth, the Bluetooth connection must remain active at all times to ensure proper operation. The product will enter into sleep mode (networked standby), after 20 minutes without operation, the power consumption @ sleep is less than 2.0 Watts, after which it can be re-activated via Bluetooth connection. 2) Bluetooth disconnection mode - The product will enter into standby mode, after 20 minutes without operation, the power consumption @ standby is less than 0.5 Watts.
Spil højt, stå frem - og vær klar til fest!
Vores JBL PartyBox 300 er en kraftfuld festhøjttaler med JBL-lydkvalitet og festlige lyseffekter. Takket være dens genopladelige batteri og 12V DC-indgang kan du flytte festen lige derhen, du vil. Du skal bare sætte din mikrofon eller guitar til og fyre den af eller streame din afspilningsliste via Bluetooth eller fra et USB-stik. Tilslut to PartyBox-højttalere trådløst med TWS-funktionen eller med kabel fra en RCA-udgang til en RCA-indgang. Lad os få gang i festen!
Få en omsluttende lydoplevelse, som kun JBL kan levere. Både derhjemme og til fester.
Der er en lysindstilling til enhver stemning: Meter, Pulse og Party.
Sæt stikket til 12V DC-udgangen i din bil eller brug det indbyggede 10.000 mAh-batteri for at få 18 timers spilletid.
Sæt din mikrofon eller guitar til og fyr den af.
Trådløs afspilning i høj kvalitet fra din smartphone eller tablet.
Forbered din fest eller dit arrangement ved at lægge din foretrukne afspilningsliste på en USB-nøgle!
Tilslut kompatible højttalere trådløst via TWS (True Wireless Stereo med op til 2 tilsluttede party-højttalere via Bluetooth) eller med kabel fra en RCA-udgang til en RCA-indgang.
En USB-port på JBL PartyBox lader dig oplade andre USB-enheder direkte fra højttaleren. Derfor behøver du ikke nogen ekstra oplader for at holde dine enheder med strøm.
FAQs & How-Tos
19 results
-
If the buttons on your portable speaker are not working properly or are unresponsive while plugged into a power source, please try running the speaker on battery. If the buttons perform correctly while running on battery, this means your power supply is not providing enough current/amps. Be sure to use a power supply that has a rating equal to or greater than the amperage rating indicated in your product specs.Was this helpful? Thank you for your feedback!
-
You can use the PartyLight Sticks and the PartyLight Beam with older PartyBox speakers. The built-in sound detection algorithm sync the light with the music from the speaker.
The light also works if you don't own a PartyBox speaker as a built-in mic with a music detection algorithm automatically finds and syncs to any music device that's playing.
Was this helpful? Thank you for your feedback! -
It is very simple to connect to your Car with the JBL Partybox 200 or 300. Use the included cable that connects through the cigarette connector in your Car and power on the Partybox! Please note that the 12V connection does not charge the battery in the Partybox 300 - it will only power the Partybox when in use. To charge the battery, it will have to be plugged into AC power ( 110 - 230V )Was this helpful? Thank you for your feedback!
-
This product does not feature speakerphone or voice assistant functionality as it does not have a microphone.Was this helpful? Thank you for your feedback!
-
Demo mode
- Press the Play and Boost button at the same time for 5 seconds.
- Depending on what state your JBL Partybox is in, either you enter Demo mode or disabling it.
- NOTE: In Demo mode, you cannot use the JBL Partybox as most features and buttons are not working.
Was this helpful? Thank you for your feedback! -
To control the Light show on your JBL Partybox device, simply press the dedicated "Light show" button located under the Bluetooth icon. There are 3 different light shows available when toggling through them, select your favorite one and have a blast. There is no app developed to control or modify these settings, all settings have to be done on the Partybox device.Was this helpful? Thank you for your feedback!
-
Bluetooth Pairing
- Press the
button on the Partybox to start the pairing process.
- Grab your
device.
- Go to settings --> Bluetooth --> Enable Bluetooth -->
- Find the Partybox speaker you want to establish a Bluetooth connection to.
- You now have a successful connection and can stream your favorite music.
- NOTE: It is only possible to have two devices connected at the same time and if you want to listen through the second Bluetooth device then stop the current one from playing and use the second device.
- To stop Bluetooth broadcasting then insert a USB device.
Was this helpful? Thank you for your feedback! - Press the
-
Finding the software version
- Press and hold the 'Volume-' and 'Bass Boost' buttons for 5 seconds.
- A voice will start prompting numbers which indicates the current software version.
Was this helpful? Thank you for your feedback! -
USB Stick
- Get an empty
stick with speed of 2.0.
- Make sure it is formatted with FAT16 or FAT32.
- Your Music files can only be:
(32-320kbit/s),
(32-320kbit/s) and
(44.1K/48K/192K).
- The Partybox supports up to 8 subfolders.
- It will be played in alphabetic sequence with main folders first then subfolders.
- To skip songs forward, double press the Play/Pause button. To skip back, triple press the Play/Pause button.
Was this helpful? Thank you for your feedback! - Get an empty
-
Resetting the Partybox to Factory Settings
- Press and hold "Play/Pause" and "Volume +" down for > 10 seconds.
- The JBL Partybox will power off and back on and is now reset.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
