JBL Xtreme
JBL's ultimative stænksikre, bærbare højttaler med kraftfuld ydelse og et hav af funktioner
Sold from 2015 until now
Successor Product: | JBL Xtreme 2 |
---|
Getting started with your JBL Xtreme
Documents & Downloads
Specifications
- Udgangseffekt (W)
- 2 x 20
- Signal-to-Noise Ratio
- 80 dB
- Frequency Response
- 70Hz – 20kHz
- Mål (cm)
- 12.6 x 28.3 x 12.2
- Mål (inch)
- 4.96 x 11.14 x 4.8
- Vægt (kg)
- 2.11
- Vægt (lbs)
- 4.65
- Bluetooth-version
- 4.1
- Batterikapacitet (mAh)
- 10,000
- Ladetid (timer)
- 3.5
- Spilletid (timer)
- 15
- 3,5 mm lydindgang
- Ja
- Auto-sluk
- Ja
- Bluetooth
- Ja
- JBL Connect
- Ja
- Powerbank
- Ja
- Højttalertelefon
- Ja
- Stænksikker
- Ja
- Wireless
- Ja
- Transducer
- Woofer 2 x 63 mm
Powerful sound, now transportable
JBL Xtreme er den ultimative bærbare Bluetooth-højttaler, der i en håndevending giver dig stor, kraftfuld stereolyd fra fire aktive transducere og to synlige JBL-basradiatorer. Det genopladelige Li-ionbatteri på 10.000 mAh leverer op til 15 timers spilletid. Med dobbelt USB-ladestik holder højttaleren både din musik og dine mobile enheder kørende, lige så længe du ønsker. Du kan være sikker på, at JBL Xtreme leverer varen, når du har brug for det – indendørs, udendørs, til festen ved poolkanten eller grillaften i haven. Det stænksikre design fås i sort, blå og rød. Oven i får du en højttalertelefon til håndfri samtaler i krystalklar kvalitet uden støj eller ekko. Med JBL Connect kan du trådløst sammenkoble flere Connect-kompatible højttalere og opnå en endnu større lytteoplevelse.
FAQs & How-Tos
-
This is because most Windows do not support A2DP stereo audio streaming via Bluetooth, the standard for music-listening through Bluetooth. The system will support keyboards, mice, printers etc. via Bluetooth, but not audio. It is necessary to download the proper drivers, either from the computer manufacturer, the software manufacturer or the manufacturer of the Bluetooth chip in the computer. Help to do this must be sought with the companies that supply one or more of these computer features.Was this helpful? Thank you for your feedback!
-
If the buttons on your portable speaker are not working properly or are unresponsive while plugged into a power source, please try running the speaker on battery. If the buttons perform correctly while running on battery, this means your power supply is not providing enough current/amps. Be sure to use a power supply that has a rating equal to or greater than the amperage rating indicated in your product specs.Was this helpful? Thank you for your feedback!
-
No, for now it is only possible to connect two speakers together using the JBL connect feature. Newer JBL products feature JBL Connect+, which allows you to connect > 100 devices simultaneously, these however are not compatible with older JBL products featuring JBL ConnectWas this helpful? Thank you for your feedback!
-
No, JBL Flip 4 can wirelessly link with JBL Connect+ compatible speakers only. Currently, the Flip 4, Pulse 3 and Charge 3 ( after a firmware upgrade ) have the JBL Connect+ featureWas this helpful? Thank you for your feedback!
-
If you are playing on battery only, you may experience slightly lower bass level and dynamics near maximum volume. If you are AC connected and playing via your Xtreme speaker, you will hear an increase in bass performance. The reason that bass performance is lowered when playing on battery is to reduce power consumption for you to have longer playing time from your Xtreme speaker.Was this helpful? Thank you for your feedback!
-
By pressing Volume - & JBL Connect button for 3 seconds. A voice will tell you the current software version.Was this helpful? Thank you for your feedback!
-
When the Xtreme is ON, the row of 5 diodes at the bottom of the front will light up in turn, with the top flashing LED showing how far charging has progressed. When full charge has been reached, all diodes light constantly. In some cases, the fifth diode keeps on blinking, but does not light up constantly, no matter how long charging continues. Sometimes it will show constant light after charging has been stopped. This is normal, caused by tolerances in the circuits, and is no cause for alarm. The battery is charged to the same level. If the Xtreme is OFF, no diodes will light when full charge has been reached.Was this helpful? Thank you for your feedback!
-
No, all recordings made on the telephone will be using the telephone's built-in microphone. Replay of the recording will be heard over the speaker afterwards, though, as long as it is paired to the telephone.Was this helpful? Thank you for your feedback!
-
There can be differences in the internal hardware that also implies different firmwares. These products feature the same specifications and performance expectations. If the app does not inform you of any new updates, the firmware is current and the product is performing as designed.Was this helpful? Thank you for your feedback!
-
No, only if the zipper is closed.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00