JBL BAR 300
5.0-kanals kompakt alt-i-én soundbar med MultiBeam™ og Dolby Atmos®
Sold from 2023 until now
Getting started with your JBL BAR 300
Documents & Downloads
Specifications
- Strømforsyning
- 100-240 V AC, ~ 50/60 Hz
- Netværkets strømforbrug ved standby
- < 2,0 W
- Driftstemperatur
- 0 °C-45 °C
- Samlet højttalerudgangseffekt (maks. ved THD (total harmonisk forvrængning) 1 %)
- 260 W
- Soundbar-transducer
- 4x (46x90) mm racetrack-enheder, 2x 0,75" (20 mm) diskanthøjttalere
- Frekvensområde
- 50 Hz - 20 kHz (-6 dB)
- Lydindgange
- 1 optisk, Bluetooth, USB (USB-afspilning er kun tilgængelig i den amerikanske version. I andre versioner er USB kun til servicebrug.)
- Soundbarens mål (B x H x D)
- 820 x 56 x 103,5 mm
- Soundbarens vægt
- 2.5 kg
- Pakkens mål
- (B x H x D)
- Pakkens vægt
- 4.1 kg
- USB-port
- Type A
- USB-strømdata
- 5 V DC, 0,5 A
- Understøttede filformater
- MP3
- MP3-kodeks
- MPEG 1 Layer 2/3, MPEG 2 Layer 3, MPEG 2.5 Layer 3
- MP3-samplingfrekvens
- 16 - 48 kHz
- MP3-bitrate
- 80-320 Kpbs
- Bluetooth-version
- 5.0
- Bluetooth-profil
- A2DP 1.2, AVRCP 1.5
- Frekvensområde for Bluetooth-sender
- 2400 MHz-2483,5 MHz
- Bluetooth-sendereffekt
- <15 dBm (EIRP)
- Wi-fi-netværk
- IEEE 802.11 a/b/g/n/ac/ax (2,4 GHz/5 GHz)
- 2,4G wi-fi-senders frekvensområde
- 2412-2472 MHz (2,4 GHz ISM-bånd, USA 11 kanaler, Europa og andre steder 13 kanaler)
- 2,4G wifi-sendereffekt
- <20 dBm (EIRP)
- 5G wi-fi-senders frekvensområde
- 5,15-5,35 GHz, 5,470-5,725 GHz, 5,725-5,825 GHz
- 5G wifi-sendereffekt
- 5,15-5,25 GHz <23 dBm, 5,25-5,35 GHz og 5,47-5,725 GHz <20 dBm, 5,725-5,825 GHz <14 dBm (EIRP)
- HDMI-videoindgang
- 1
- HDMI-videoudgang (med Enhanced Audio Return Channel, eARC)
- 1
- HDMI HDCP-version
- 2.3
- HDR-gennemgang
- HDR10, Dolby Vision
Det er showtime! Den fuldt integrerede JBL Bar 300 forvandler dine film og tv-serier til en ægte oplevelse og løfter dine spil op på et helt nyt niveau. MultiBeam™- og Dolby Atmos®-teknologier leverer livagtig 3D-surroundlyd. PureVoice-teknologi optimerer stemmeklarheden, så du aldrig går glip af et ord. Når du er klar til at slappe af med musik eller en podcast, kan du vælge mellem over 300 streamingtjenester og nyde dem via AirPlay, Alexa MRM eller Chromecast built-in™.
FAQs & How-Tos
-
Yes!
By using the JBL ONE app, you can change the equalization settings of the speaker to fit your personal taste by adjusting the settings of each frequency to create your personalized EQ:- BASS: Adjust the lower frequency sounds, such as bass or a kick drum.
- MID: Adjust the mid-frequency sounds, such as human speech.
- TREBLE: Adjust the higher frequency sounds for clarity.
Was this helpful? Thank you for your feedback! -
Yes, however, the JBL ONE App gives you another level of control over the speaker/soundbar.
Through the App, you can personalize the speaker/soundbar's performance, such as:- Customizing EQ settings
- Setting up our new feature called: My Moment
- Connect your favorite streaming music services.
Was this helpful? Thank you for your feedback! -
No, the JBL Bar 300/500 does not support DTS.
It supports the following Dolby Audio formats:
Dolby Atmos
Dolby Digital
Multichannel PCMWas this helpful? Thank you for your feedback! -
Once the speaker/soundbar is connected to the network, software updates will automatically be sent to the product through Wi-Fi or the internet, if availableWas this helpful? Thank you for your feedback!
-
In the JBL ONE App:
(1) Go to My Products, select your product
(2) Select Support tile
(3) Under General, select Product SupportWas this helpful? Thank you for your feedback! -
If you cannot stream music with AirPlay, use the JBL One App;
(1) Go to Settings.
(2) Select 3rd Party Service.
(3) Select the Airplay tile.
(4) Select Reset AirPlay.Was this helpful? Thank you for your feedback! -
(1) Select the JBL speaker/soundbar you want to rename
(2) Navigate to the Support tile and select "Rename My Product."
(3) Press the current name and type in the new name
(4) Press SAVEWas this helpful? Thank you for your feedback! -
The factory reset button restores your device to the default settings, including network and audio configurations.
Please use one of the following solutions:- Press and hold VOL -, VOL +, and Source buttons on the device at the same time until the LED light flashes (hold for more than 5 seconds)
- Open your JBL ONE App.
- Navigate to the support tile.
- Select RESTORE FACTORY SETTINGS.
Was this helpful? Thank you for your feedback! -
(1) Use JBL One App to set up the My Moment Feature.
(2) Select the JBL speaker/soundbar you want to set your favorite music to the My Moment feature.
(3) Tap the My Moment card to assign music.
(4) Click Add Music to manage music streaming services and specific music tracks.
(5) Set the timer to inactive speaker/soundbar (optional)
(6) Set the music loudness (optional)
(7) Press SAVEWas this helpful? Thank you for your feedback! -
The JBL Bar 300 does not support a subwoofer. Alternatively the JBL Bar 500 has a wireless subwoofer included.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00