JBL Bar 5.0 MultiBeam
5.0 kanal soundbar med MultiBeam™-teknologi og Virtual Dolby Atmos®
Sold from 2023 until now
Getting started with your JBL Bar 5.0 MultiBeam
Documents & Downloads
Specifications
- •Samlet højttalerudgang (max. @THD 1 %)
- 250 W
- •Soundbars udgangseffekt (max. @THD 1 %)
- 5 x 50 W
- Transducer
- 5 x 48 mm x 80 mm racetrack-enheder + 4 x 3 tommer (7Transducer
- Strømforsyning
- 100 - 240 V AC, ~ 50/60 Hz
- Max SPL
- 92 dBA
- Frequency Response
- 50Hz - 20KHz
- 1 Optical, Bluetooth, Chromecast, AirPlay 2, Alexa MRM, USB
- MP3 Codec
- MPEG 1 lag 2/3, MPEG 2 Lag 3, MPEG 2,5 Lag 3 (kun USA), Dolby Atmos, PCM
- Mål (B x H x D)
- 709x 58x 101 mm
- Vægt
- 2.8kg
- Type A, USB-strømdata
- 5 V DC, 0,5 A
- (*USB-afspilning understøttes I den amerikanske version. For andre versioner er USB kun til service.)
- Bluetooth-version
- 4.2
- Bluetooth-profil
- A2DP V1.2, AVRCP V1.5
- Bluetooth-frekvensområde: 2400 – 2483,5 MHz
- Bluetooth-sendeeffekt
- <10 dBm (EIRP)
- Wi-fi-netværk
- IEEE 802.11 a/b/g/n/ac (2,4GHz/5GHz)
- 2,4 G wi-fi-frekvensområde
- 2412 - 2472 MHz (2,4 GHz ISM Band, USA og Canada 11 Kanaler, Europa og andre 13 kanaler)
- 2,4G wi-fi-sendeeffekt
- < 20 dBm (EIRP)
- 5G wi-fi-frekvensområde: 5,15 - 5,35GHz, 5,470-5,725GHz, 5,725 - 5,825GHz
- 5G wi-fi-sendereffekt
- < 23 dBm (EIRP)
- HDMI In
- 1
- HDMI eARC
- 1
- HDMI HDCP version
- 2.3
Oplev fyldig 3D-surroundlyd derhjemme
Oplevelsen af film og spil bliver mere medrivende end nogensinde før med den uovertrufne kombination af JBL MultiBeam™-teknologi og Virtual Dolby Atmos®. Mærk lyden hele vejen rundt, når du kastes ind i kampens hede med dyb bas uden behov for en ekstra subwoofer. Den har Chromecast built-in™, AirPlay og Alexa Multi-Room Music (MRM) for utrolig nem trådløs musik og mulighed for lyd i flere rum. Med Bluetooth kan du også nyde musik fra din smartphone eller tablet. Takket være det strømlinede design med gittermønster og metaloverflade passer JBL Bar 5.0 MultiBeam ind i ethvert hjem. Den er kompakt og nem at bruge. Du kan styre den med din tv-fjernbetjening eller den medfølgende intuitivt designede fjernbetjening.
FAQs & How-Tos
-
BAR 5.0 MULTIBEAM
Software Update Release Notes
------------------------------------------------------------------------
Version: 21-04-54-70
Release Date: January 29, 2021- Improved WiFi related services compatibility (for Chromecast, AirPlay and Alexa MRM) with phones and tablets.
- Improve Soundbar HDMI and eARC/ ARC Compatibility with TV.
- Improved LED Display messages.
Was this helpful? Thank you for your feedback! -
- On an Android or iOS device, add the Soundbar to your home WiFi network through the JBL BAR Setup App.
- Follow the App instructions to complete setup.
- Sign in with your Amazon Alexa account. If you do not have, create one.
- With the Alexa MRM multi-room music playback, you can stream music on your Android or iOS devices to multiple Amazon Alexa speakers.
Was this helpful? Thank you for your feedback! -
Close and restart the Google Home app, or restart your phone. Start the Google Home app again, and the speaker should now appear.
Was this helpful? Thank you for your feedback! -
The Checklist
Let us walk-through a list of things needed to ensure every requirement is met.
- Check your mobile device if that is able to connect to same Wireless network.
- Make sure you are within range of your Wireless router.
- Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
- Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.
- You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
- You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
- Try using a different mobile device, if you have one.
- Reboot your Wireless network router and your mobile device.
Wireless Network Extender
Some houses or apartments can be too big for one Wireless network router to cover it all.
Let's talk about the issues that might appear with an Extender network.- Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
- Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
- Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
- To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
- In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).
One Wireless Network Name (SSID)
- You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
- If the speaker is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
- To solve this issue, using two different name for your extended network will help with the performance of the Speaker and Google Assistant request.
Was this helpful? Thank you for your feedback! -
When listening to multichannel content you may find that your dialogue isn’t coming in as clear, or your surround effects are louder than you’d like. Our sound bars have a feature called ‘Smart Mode’ that implement our unique JBL Surround Sound as well as other tailored EQ settings. While these are great for content that needs a helping hand, for some multi-channel content it can be overwhelming. If you find this to be the case with some content, you can disable ‘Smart Mode'.
To toggle between smart mode and standard surround, on the remote control, press and hold MUTE for more than 3 seconds, then press Volume Up (+). "OFF SMART MODE" or "ON SMART MODE" will be displayed.NOTE: The sound bar defaults to smart mode every time the bar is turned on.Was this helpful? Thank you for your feedback! -
If you see this message, you must download the Device Utility app from the Google Play Store. Follow the instructions in the app to activate your speaker, and then return to the Google Home app to complete the setup.
Was this helpful? Thank you for your feedback! -
If the network does not appear, you can manually type in the network name (SSID) and password to connect.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00