JBL Cinema SB250

JBL Cinema SB250

200W soundbar med trådløs subwoofer og virtuel surround-lyd til hjemmebiografen

Sold from 2015 until now

Getting started with your JBL Cinema SB250

Getting started with your JBL Cinema SB250

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Specifications

Frequency response
45Hz – 20kHz
Maximum SPL
100dB
Gross weight
23.1 lb (10.5kg)
Total Cinema SB250 amplifier power
200W max
Soundbar (L x W x H)
32.7" x 2.5" x 3.1" (831 x 65 x 78mm)
System Weight (kg)
2.8kg
Subwoofer Weight (kg)
4.8kg
Subwoofer (L x W x H)
9.5" x 9.5" x 12.6" (242 x 242 x 320mm)

Brings cinematic sound to any thin-profile TV

Cinema SB250 er designet til at matche ethvert fladskærms-tv og projicerer forbløffende virtuel surroundlyd fra en slank og enkelt pakke.<CRLF>Den opretter trådløs forbindelse til den kompakte, kraftfulde subwoofer og tilsluttes et tv med et enkelt kabel. Den kan også forbedre visningsoplevelsen med banebrydende trådløse Bluetooth-funktioner til streaming, som omfatter JBL SoundShift™, der samarbejder med dit tv og din trådløse mobile enhed samtidigt og automatisk lader dig skifte mellem lyden fra dit tv og lyden fra din telefon eller tablet. JBL Cinema SB250 kan lære en hvilken som helst kommando fra en tv-fjernbetjening, så du opnår forenklet kontrol over din hjemmebiografoplevelse. En equalizerkontakt til væg- eller bordmontering kalibrerer SB250 til en hvilken som helst installationstype, mens subwooferens uafhængige lydstyrkekontrol lader dig tilpasse basgengivelsen til din personlige smag.

JBL Cinema SB250 passer til alle moderne fladskærms-tv'er og leverer forbløffende biograflyd.
Komplet alt i én-løsning med kompakt 6,5" (165 mm) trådløs subwoofer.
Enkel analog eller optisk tilslutning til dit tv.
Gør din oplevelse enklere ved brug af din eksisterende tv-fjernbetjening til betjening af din soundbar.
Fungerer sammen med dit tv og din trådløse mobilenhed samtidigt, så du automatisk kan skifte mellem lyden fra dit tv og lyden fra din telefon eller tablet.
Biograflyd med Dolby® Digital og Harman Display Surround.
Slut med støjende reklamer – Harman Volume holder lydniveauet konstant.

FAQs & How-Tos

23 results
  • Check to see if it happens with all source devices (TV, BluRay, DVD, etc.). If it only happens with one device and not the other, the issue may be with that device. Make sure you do not have any HDMI adapters or splitters. These can cause issues with video and audio.
  • Sorry, this is not possible.
  • SB 250 will only pass one connection at a time. If two connections are playing at the same time, then the optical device will take priority.
  • We only offer volume+ and volume-, mute and power for your TV remote to learn these IR codes.
  • No, SBC Codec and AAC Codec are supported.
  • Short-press the Bluetooth Button to open for new pairing.
  • 1. Press and hold the surround button on the Soundbar, until the system enter "learning mode"(the LED will blink orange). 2: VOLUME + : Press 'Volume +' on the soundbar and then press 'Volume +' on the TV remote control. 3: VOLUME ? : Press 'Volume �' on the soundbar and then press 'Volume �' on the TV remote control. 4: MUTE: Press 'Volume +' and 'Volume �' together on the soundbar and then press 'Mute' on the TV remote control. 5: POWER: Power On your soundbar by pressing the 'Power' key on the soundbar and then pressing the 'Power' key on the TV remote control. Note: After each TV IR code is programmed, the blinking orange LED will turn white for 1 second. The soundbar is ready to learn the next key after the white LED disappears and the orange LED begins to blink.Press and hold the top panel 'Surround' key again to exit learning mode (the orange LED will stop blinking).
  • You can have several source paired, but only one active at the same time.
  • Make sure the optical connection is seated securely on the SB250 and on your device. Go into your device settings and make sure the digital output is enabled. On TV displays the option usually states "enable external speakers" or enable "digital audio output".
  • Yes, switch the soundbar ON, then press the volume - ( minus ) and surround buttons at the same time for 5 seconds. Now the device is reset.
< 1 2 3 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00