Arena 120

Arena 120

surroundhøjttalere

Sold from 2015 until now

Getting started with your Arena 120

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Specifications

Recommended Amplifier Power
20 - 100W
Sensitivity
86 dB
Crossover Frequencies
2.5kHz – 18 dB/octave
Frequency Response
100 Hz - 40 kHz
Nominal Impedance
8 Ohms
Width (mm)
188
Width ( in)
7-13/32
Height (mm)
341
Depth (mm)
113
Height (in)
13-7/16
Depth (in)
4-7/16
Weight (lb)
7.7
Weight (kg)
3.5

Surround yourself with JBL sound at a price that’s easy

Blot fordi du er hjemme, behøver tingene ikke gå stille for sig. Med den hårdtslående 5,5" (140 mm) basenhed i polycellulose og en 1" (25 mm) blød dome-diskant er reol-/surroundhøjttaleren JBL Arena 120 et wake-up call til alle, der genkender kvalitetslyd, når de hører den. Arena 120 er inspireret af den legendariske JBL M2 Master Reference Monitor og kan vægmonteres, så du opnår en imponerende detaljerigdom overalt i lokalet – uanset om du lytter til musik, tv-programmer, film eller spil.

HDI-bølgeretningsteknologien (High Definition Imaging) er hentet fra den legendariske JBL M2 Master Reference Monitor.Computeroptimeret enhedsplacering og netværksintegration sikrer perfekte præstationer og et livagtigt lydbillede. Gennemprøvet akustisk overlegenhed takket være omfattende test og evaluering fra den virkelige verden.
5,5" (140 mm) basenheden i polycellulose leverer den kendte JBL-lyd, som får musik, tv-programmer, film og spil til at fylde hele rummet.1" (25 mm) blød dome-diskant giver klarhed og kraft til de høje toner Oplev banebrydende lyd-præcision i tv-udsendelser, film og spil
Det moderne kabinet-design med vinklet side og toppaneler giver et sofistikeret, moderigtigt look.Integreret løsning til vægmontering giver fleksibel installation og systemopsætning.Berøringsvenlig lakering omkring transducere og bølgeretning.Fås i sort og hvid finish, som understreges af minimalistiske gitre og detaljer i børstet metal.
Den perfekte treenighed af JBL-kræfter, præcision og en attraktiv pris.
Fungerer som reol- eller surroundhøjttaler i stereo- og surround-anlæg.Beregnet til brug sammen med hele serien af JBL Arena-højttalere: to gulvhøjttalere, to reolhøjttalere, en centerhøjttaler og en subwoofer-model.

FAQs & How-Tos

3 results
  • Often, hum is caused by a ground loop. This is a problem that is sometimes created when connecting two or more electrical components together. Sometimes the problem does not lie in any one particular unit, but in how they're connected. If your subwoofer is connected to a different wall outlet than your system, try to move the subwoofer plug to the same outlet. This may require an extension cord just for the trial. If it works, you can permanently move the sub or use an extension cord. However, if the hum you are hearing is coming from inside the sub, or if it is constant even when nothing is connected to the inputs of the sub, there is something wrong with the sub and you should bring it in for service.
  • There are two ways to blow speakers. The first is the one we all know and understand. If you pump 500 watts into a speaker that is only rated at 100 watts, kaboom, it blows up. As a result, very few of us do this. So then why are all of these poor, helpless speakers blowing up? Because of the second reason, under-powering. It's really a misleading term, but let's try to explain. First let's take it to the maximum. Example: You have a 1000 watt speaker and a 100 watt amplifier. The way you like to listen to music requires 300 watts. Typically, you will ask your amp to put out that 300 watts that you want to hear. The amp will do it, but it will clip and distort. Unfortunately, the human ear can't hear distortion until it reaches almost 10%. By that time it's usually too late. The speaker keeps trying to reproduce this distortion that it's not capable or reproducing and eventually it blows (usually the tweeter fails first). If you are blowing speakers with an amp that has a power rating lower than your speakers, you are pushing your amp too far, causing it to clip, and blowing speakers. If you are pushing your system too hard, it is suggested that you realize your systems limitations or recommend that you get a more powerful amplifier. Please realize, if you only buy speakers that will handle more power and not a more powerful amplifier, you won't solve the problem. The speakers will still blow, because it is distortion that is blowing them, not too much power.
  • "You can attached these spikes to your Arena 170 & Arena 180 at the bottom of the speaker. Use them for stability if you are placing your Arena 180/170 speakers on a thick rug or plush carpeting. The carpet spikes can be manually screwed into each foot on the base of the speaker."

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00