JBL Boombox 3

If you are having trouble with distortion or drop outs, try the following suggestions:

Move the audio source closer to the speakers

Move the speakers closer to each other

Make sure the streaming speaker (host) only connects to one audio source, disconnect the Bluetooth connection between the streaming speaker (host) and other audio source

Make sure the audio source only connects with one streaming speaker (host), disconnect the Bluetooth connection between the audio source and other speakers

Restart both your speakers and the audio source

Make sure speakers are away from other sources of wireless signal – you could be experiencing interference

Re-pair the audio source with your speaker

If you’re streaming audio content from the internet, the issue could be with the internet connection and not your speaker

BOOMBOX 3
Software Update Release Notes
------------------------------------------------------------------------
Software Version:  V0.3.0.0
Version (iOS):  N/A
Version (Android):  N/A
Release Date:  July 27, 2022
Release Media:  OTA (over the air) via JBL Portable App


What’s New

1. Fixed Issue: Red LED keeps flashing after powering off the device
2. Fixed Issue: Battery indicator LEDs do not change when charging an external device via USB-A port
3. Fixed Issue: Charging LED keeps flashing after speaker is fully charged
4. Other minor bug fixes and performance improvements

You will need to dry the charging port completely before plugging in power for charging.
 

This product does not feature speakerphone or voice assistant functionality as it does not have a microphone.

• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.

This product is rated IP67, which is different from IPX7. IP67 protects the product from submersion in 1 meter (3.3 feet) of water for up to 30 minutes. It is also resistant against dust. Dust accumulation around electronics can lead to hardware failure, so the IP67 rating is an extremely beneficial addition to this product. 

The new PartyBoost does not support the previous Connect and Connect+ features. For example: You will not be able to successfully connect the new PartyBoost enabled Flip 5 with a Connect+ enabled speaker like the Pulse 3 or Flip 4. You will not be able to connect the Boombox 2 to the original Boombox speaker.

1. Connect the first Partyboost speaker with your phone and keep music playing (for best results play music on this speaker for more than 20 seconds before proceeding with the next steps).

2. Press the Partyboost button on the first speaker.
3. Turn on the second speaker that you want to connect in Partyboost mode.
4. Now press the Partyboost button on the second speaker.
5. After a few seconds, both Partyboost speakers should connect and play together.
It can take a few seconds after music is started before sound will be heard from both speakers.
This is also the process for connecting more than two speakers in Party mode, simply turn on the other compatible speakers and press the Partyboost buttons.

1. Turn on both speakers.
2. Connect your device to one of the two speakers via Bluetooth.

3. Start streaming music to that speaker (for best results play music on this speaker for more than 20 seconds before proceeding with the next steps).
4. Open the JBL Portable app.
5. Allow the app to detect the single speaker playing music.
6. Once detected, press the Connect/Partyboost button on both speakers.

7. Allow the app to identify both speakers.
8. Click the Partyboost button, you will see the option for Party or Stereo, select Stereo.

Please note: Stereo Mode can only be enabled when 2 of the same speaker model are used.
For example, you will not be able to achieve Stereo Mode with a Flip 5 and Flip 6, only Party Mode.
Also, it is not possible to pair speaker models with Connect and Connect+ together, or pair to speaker models with Partyboost.

The PartyBoost feature is not available when your JBL speaker is connected to a computer via Bluetooth. This is a technical limitation. When connected to a computer, the computer is acting as the primary device. Therefore, the JBL speaker does not have control of re-transmitting the Bluetooth signal to other JBL speakers.

NOTE: Speakers effected by this are the JBL Flip 5, JBL Flip 6, JBL Charge 5, JBL Pulse 4, JBL Xtreme 3, and JBL Boombox 2, as well as future products featuring the PartyBoost feature.