JBL Pulse 5
Kannettava Bluetooth-kaiutin, jossa valoshow
Sold from 2022 until now
Predecessor Product: | JBL Pulse 4 |
---|
Getting started with your JBL Pulse 5
Documents & Downloads
Specifications
- Lähtöteho (W)
- 30 W RMS for Woofer, 10 W RMS for Tweeter
- Dynaaminen taajuusvaste (Hz)
- 58 Hz - 20 kHz (axial, -6 dB )
- Mitat (cm)
- 10.7 x 21.4 x 13.2
- Mitat (inch)
- 4.2 x 8.5 x 5.2
- Paino (kg)
- 1.47
- Paino (lbs)
- 3.2
- Bluetooth profiilit
- A2DP 1.3, AVRCP 1.6
- Bluetooth-taajuus
- 2407 MHz - 2475 MHz
- Bluetooth-lähettimen modulaatio
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth-lähettimen teho
- < 10 dBm (EIRP)
- Bluetooth-versio
- 5.3
- Latausaika (t)
- 4
- Musiikin toistoaika (t)
- 12
- Bluetooth
- Kyllä
- Charging cable
- Kyllä
- JBL PartyBoost
- Kyllä
- Valoesitys
- Kyllä
- Vedenpitävä
- Kyllä
- Wireless
- Kyllä
- Ladattava akku
- Kyllä
Ääni, jonka voit nähdä
Valaise hetki JBL Pulse 5:n huomiota herättävällä, yksilöitävällä 360 asteen valoshow'lla, joka on synkronoitu musiikkisi rytmiin, samalla kun sen kaiutinelementti vapauttaa syvän bassotoiston ja rohkean JBL Original Pro Sound -äänen kaikkiin suuntiin. Tukevan hihnan ansiosta voit ottaa kannettavan pöly- ja vesitiiviin Bluetooth-kaiuttimen mukaan niin takapihalle kuin uimarannalle ja pidemmällekin. Tanssi aamuun asti 12 tunnin soittoajalla tai käytä PartyBoost-toimintoa useiden yhteensopivien kaiuttimien liittämiseen yhteen aina, kun haluat lisätä ääntä – ja tehostaa tunnelmaa.
FAQs & How-Tos
-
If you are having trouble with distortion or drop outs, try the following suggestions:
Move the audio source closer to the speakers
Move the speakers closer to each other
Make sure the streaming speaker (host) only connects to one audio source, disconnect the Bluetooth connection between the streaming speaker (host) and other audio source
Make sure the audio source only connects with one streaming speaker (host), disconnect the Bluetooth connection between the audio source and other speakers
Restart both your speakers and the audio source
Make sure speakers are away from other sources of wireless signal – you could be experiencing interference
Re-pair the audio source with your speaker
If you’re streaming audio content from the internet, the issue could be with the internet connection and not your speakerWas this helpful? Thank you for your feedback! -
This product is rated IP67, which is different from IPX7. IP67 protects the product from submersion in 1 meter (3.3 feet) of water for up to 30 minutes. It is also resistant against dust. Dust accumulation around electronics can lead to hardware failure, so the IP67 rating is an extremely beneficial addition to this product.Was this helpful? Thank you for your feedback!
-
Press and hold the Light Show & Bluetooth buttons together for > 2 seconds.
Was this helpful? Thank you for your feedback! -
Press and hold the Light Show & Bluetooth buttons together for > 2 seconds.
Was this helpful? Thank you for your feedback! -
1. Connect the first Partyboost speaker with your phone and keep music playing (for best results play music on this speaker for more than 20 seconds before proceeding with the next steps).
2. Press the Partyboost button on the first speaker.
3. Turn on the second speaker that you want to connect in Partyboost mode.
4. Now press the Partyboost button on the second speaker.
5. After a few seconds, both Partyboost speakers should connect and play together.
It can take a few seconds after music is started before sound will be heard from both speakers.
This is also the process for connecting more than two speakers in Party mode, simply turn on the other compatible speakers and press the Partyboost buttons.Was this helpful? Thank you for your feedback! -
1. Turn on both speakers.
2. Connect your device to one of the two speakers via Bluetooth.
3. Start streaming music to that speaker (for best results play music on this speaker for more than 20 seconds before proceeding with the next steps).
4. Open the JBL Portable app.
5. Allow the app to detect the single speaker playing music.
6. Once detected, press the Connect/Partyboost button on both speakers.
7. Allow the app to identify both speakers.
8. Click the Partyboost button, you will see the option for Party or Stereo, select Stereo.
Please note: Stereo Mode can only be enabled when 2 of the same speaker model are used.
For example, you will not be able to achieve Stereo Mode with a Flip 5 and Flip 6, only Party Mode.
Also, it is not possible to pair speaker models with Connect and Connect+ together, or pair to speaker models with Partyboost.Was this helpful? Thank you for your feedback! -
The PartyBoost feature is not available when your JBL speaker is connected to a computer via Bluetooth. This is a technical limitation. When connected to a computer, the computer is acting as the primary device. Therefore, the JBL speaker does not have control of re-transmitting the Bluetooth signal to other JBL speakers.
NOTE: Speakers effected by this are the JBL Flip 5, JBL Flip 6, JBL Charge 5, JBL Pulse 4, JBL Xtreme 3, and JBL Boombox 2, as well as future products featuring the PartyBoost feature.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 10:00 - 19:00
Saturday - Sunday: 11:00 - 17:00