Reference 1600a

Reference 1600a

Mono Subwoofer Amplifier

Sold from 2007 until now

Predecessor Product: REFERENCE 611A
Made in: China

Documents & Downloads

Specifications

CEA Rated
Yes
Amplifier Power (RMS)
400 watts x 1 channel @ 4 ohms and ≤1% THD + N
Signal-to-Noise Ratio
85dBA (reference 1 watt into 4 ohms)
Dynamic Power
600 watts @ 2 ohms
Effective Damping Factor
6.3 @ 4 ohms
Frequency Response
11Hz – 330Hz (-3dB)
Maximum Input Signal
6V
Input Sensitivity
MAXIMUM... 100mV
MSRP U.S.
$374.95 each
Signal-to-noise ratio
85dBA (reference 1 watt into 4 ohms)
Dynamic power
894 watts at 2 ohms
Frequency response
11Hz – 330Hz (–3dB)
Effective damping factor
6.3 at 4 ohms
Maximum input signal
6V
Maximum sensitivity
100mV
Dimensions (L x W x H)
14-3/16" x 9" x 2-11/16"
Dimensions (L x W x H) mm
(360mm x 229mm x 68mm)

600-Watt mono subwoofer amplifier with on-board electronic crossover and variable bass boost circuit.

When you want your bass to really bump, you need all the good, clean power you can get. You need a subwoofer amplifier that is both powerful and efficient, which is exactly what you get with the Infinity Reference 1600a. The 1600a is an extremely efficient Class D design that delivers 600-watts RMS and nearly 900 watts of dynamic power into two ohms. Now, that’s some power. More than other types of amplifiers, this Class D design turns the power extracted from your vehicle’s charging system into output to your subwoofer. Since the 1600a is so efficient, less of its power is wasted as heat. You’ll appreciate that power when you have your system cranked up. What’s more, the 1600a is CEA-2006 certified. The Consumer Electronics Association’s testing procedure is based on accepted industry standards and is not some power spec made up to satisfy a marketing department. With Infinity, it ensures that you are getting every bit of power out of the 1600a that we say you will. So go for it. With the 1600a you are going to get cleaner, more efficient power going to your subwoofer – and you know what that means. It means get ready to rock and roll, because your vehicle is going to be shaking with bass.
We want to make sure that you are getting every last bit of bump out of your system. Many amplifier companies offer simple bass-boost control for “more” bass. The problem with most bass-boost controls is that they can’t optimize the bass of your particular system. They can produce bass that sounds boomy and distorted, and can even damage your subwoofer. The Reference 1600a’s Dynamic Bass Optimization circuit does bass the right way by providing superior adjustability and control. It empowers you to boost the level of bass and has a high-pass filter that allows you to select and adjust the frequency of bass that you want to boost. You get not only more bass (for all you bass-heads) but better sounding bass as well.
We know that you are probably going to want just a bit more bass when you’re listening to Metallica than when you have your favorite Barry Manilow track playing. The Reference 1600a’s included remote level control makes adjusting bass output on the fly easy. First, set the input-sensitivity control on the amplifier for the maximum output level. Then mount the control somewhere close and use its simple rotating knob to dial up just the right amount of bass for whatever music you’re playing.
Maximizing the performance of your amplifier demands high-performance wiring. The Reference 1600a makes installing a reliable connection easy with high-quality, direct-connect terminals. Direct-connect terminals eliminate the need for additional solder-on or crimp-on terminals, and provide easy and reliable connections for power, ground and speaker wires.
Once you have added the power of an Infinity Reference 1600a to your system, there’s a good chance that you are going to want more. The full-range preamp output connections on the 1600a allow you to build your dream system by adding another Infinity amplifier without requiring a splitter to divide the audio signal. As a result, you’ll get cleaner sound and an easier installation process. So go ahead. Take it up a notch and build the car audio system of your dreams.

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +44 161 222 3325

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00

message

WhatsApp Us

Send us a message on +44 161 222 3325 or click  here 

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00