JBL Live Flex 3
True wireless noise-cancelling earbuds with open-stick design and Smart Charging Case™
Getting started with your JBL Live Flex 3
Documents & Downloads
Specifications
- Driver size
- 12 mm/ 0.47" Dynamic Driver
- Power supply
- 5V 1A
- Maximum operation temperature
- 45 °C
- Frequency response
- 20 Hz - 40 kHz
- Impedance
- 13 ohm
- Sensitivity
- 100 dB SPL@1 kHz
- Maximum SPL
- 95 dB
- Earbud
- 4.5 g per pc (9.0 g combined)/0.0099 lbs per pc (0.0198 lbs combined)
- Charging case
- 63.7 g/ 0.1404 lbs
- Microphone sensitivity
- -38 dBV/Pa@1 kHz
- Bluetooth version (Earbud)
- 5.3
- Bluetooth version (Charging case)
- 5.1
- Bluetooth profile version
- HFP
- Bluetooth transmitter frequency range
- 2.4 GHz - 2.4835 GHz
- Bluetooth transmitter power (Earbud)
- <9 dBm (EIRP)
- Bluetooth transmitter power (Charging case)
- <10 dBm (EIRP)
- Bluetooth transmitter modulation (Earbud)
- GFSK, π/4-DQPSK, 8-DPSK
- Bluetooth transmitter modulation (Charging case)
- GFSK
- Earbud battery type
- Lithium-ion battery (50 mAh/ 3.85 V)
- Charging case battery type
- Lithium-ion battery (690 mAh/ 3.85 V)
- Charging time
- 2 hrs from empty
- Music playtime with BT on and ANC off
- Up to 10 hrs
- Music playtime with BT on and ANC on
- Up to 7 hrs
- Music playtime with BT on and True Adaptive ANC on
- Up to 6.5 hrs
- Talk time with ANC off
- Up to 5 hrs
Make your day sound amazing
Get customized sound without even looking at your phone. Use the controls on the Smart Charging Case™ of the JBL Live Flex 3 true wireless noise-cancelling open-stick earbuds with Hi-Res Audio to customize all their features without opening the JBL app on your device. Adjust volume and EQ, control your music, take phone calls, see messages—you can even customize the screensaver with your favorite photos. And that’s before you get to enjoy the monumental JBL Signature Sound of the Live Flex 3 earbuds themselves. Best-in-class True Adaptive Noise Cancelling tunes out distractions. JBL Spatial Sound makes movies and music truly immersive. And if you have to take a call, 6 mics ensure perfect sound quality even in the noisiest surroundings. All this, plus a 50-hour charge: 10 hours in the buds* and another 40 in the case—and they can charge wirelessly. The charging case features a loop to attach a lanyard for even more convenience. Great sound has never been simpler. (*with ANC off)
FAQs & How-Tos
-
As with all in-ear headphones, our range of True Wireless Stereo headphones can be susceptible to a build up of dust and earwax. This can cause low volume on one or both earbuds, or balance issues (e.g. right earbud is louder than the left earbud). To reduce the likelihood of these issues occurring, it is a good idea to periodically clean your earbuds. Clean the earbuds by removing dust and wax after each use, using a pointed toothpick to remove larger amounts and a small amount of rubbing alcohol applied to a cotton swab for final degreasing. Remember to clean the charging points on the headphones and inside the charging case.
If you are experiencing volume or balance issues, always check for wax and dirt in and around the earbud and driver and complete cleaning of the earbuds as described above. If the issue persists, there may be earwax/dirt stuck in the small holes in the grille in front of the driver, preventing sound output. To resolve the issue try dipping the affected earbud tip into a solution of lukewarm tap water and a small amount of dish soap (washing up liquid). The earbud tip should only be put into the liquid up to a maximum depth of 1-2 mm only (see images below). Immersing the earbuds in water or putting the earbuds in water at a larger depth than this could void your warranty. Keep the earbud tip in the water for about 2-3 minutes, then wipe/clean the grille with a small brush (such as a toothbrush). This should remove the wax and resolve the volume/balance issues.
Was this helpful? Thank you for your feedback! -
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
The JBL product is in a deep sleep mode, which it is to prolong the lifetime of the battery. Connect the case to a charger for about 2 seconds to wake the product up and take the earbuds out from the case. Once you put the earbuds back in the case, it's ready to pair through Bluetooth.
Was this helpful? Thank you for your feedback! -
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback! -
This headphone is supported by the My JBL Headphones App.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+44 161 222 3325
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00
Chat with us
Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00