JBL Tune 720BT
Wireless over-ear headphones
Sold from 2023 until now
Getting started with your JBL Tune 720BT
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Driver size (mm)
- 40
- Number of Microphones
- 1
- Driver sensitivity at 1kHz/1mW (dB)
- 101
- Dynamic frequency response range (Hz)
- 20 Hz – 20 kHz
- Impedance (ohms)
- 32
- Audio Cable Length (ft)
- 0.7
- Audio Cable Length (m)
- 0.2
- Ear Cup Depth (cm)
- 2.0
- Ear Cup Depth (in)
- 0.8
- Ear Cup External Height (cm)
- 7
- Ear Cup External Height (in)
- 3.6
- Ear Cup External Width (cm)
- 7.6
- Ear Cup External Width (in)
- 3.0
- Ear Cup Internal Height (cm)
- 5.4
- Ear Cup Internal Height (in)
- 2.1
- Ear Cup Internal Width (cm)
- 3.7
- Ear Cup Internal Width (in)
- 1.5
- Weight (g)
- 220
- Weight (oz)
- 7.8
- Bluetooth profiles
- HFP v1.7.2, AVRCP v1.6.2, A2DP v1.3.2
- Bluetooth frequency
- 2.4 GHz – 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4-DQPSK, 8-DPSK
- Bluetooth transmitter power
- ≤ 10 dBm (E.I.R.P)
- Bluetooth version
- 5.3
- Charging time (hours from empty)
- 2
- Maximum play time (hours)
- 76
- Bluetooth
- Yes
- Charging cable
- Yes
- Foldable
- Yes
- JBL One App
- Yes
- Built-in Microphone
- Yes
- Detachable Cable
- Yes
- Hands Free Call
- Yes
- JBL Pure Bass Sound
- Yes
- Multi-Point Connection
- Yes
- Speed charge
- Yes
- Water Resistant
- Yes
- Voice Aware
- Yes
Immerse in JBL Pure Bass sound wherever you go.
The JBL Tune 720BT headphones stream powerful JBL Pure Bass sound thanks to the latest 5.3 BT technology. Easy to use, these headphones provide up to 76 hours of pure pleasure and an extra 3 hours of battery with just 5 minutes of charge. Download the free JBL Headphones App and customize your sound through the EQ, while Voice Prompts guide you through the headphones features. Manage calls, sound and volume from the earcup, thanks to the convenient button controls. If a call comes in while you are watching a video on another device, the JBL Tune 720BT seamlessly switches to your mobile device, so you never miss a call. Lightweight and comfortable even after hours of listening, the JBL Tune 720BT headphones fold flat in your backpack to follow you everywhere.
The JBL Tune 720BT utilizes the renowned JBL Pure Bass sound, the same technology that powers the most famous venues all around the world.
Wirelessly stream high-quality sound from your smartphone without messy cords with the help of the latest Bluetooth technology.
Download the free JBL Headphones App to tailor the sound to your taste with the EQ. Voice prompts in your desired language guide you through the Tune 720BT features.
For long-lasting fun, listen wirelessly for up to 76 hours and recharge the battery in as little as 2 hours with the convenient Type-C USB cable. A quick 5-minute recharge gives you 3 additional hours of music.
Easily control your sound and manage your calls from your headphones with the convenient buttons on the ear-cup. Hear your voice while talking, with the help of Voice Aware.
Allows you to effortlessly switch from one Bluetooth® device to another. You can simply switch from a video on your tablet to a call on your mobile phone, so that you’ll never miss a call.
The lightweight materials and soft ear cushions with a padded headband make the headphones comfortable to wear for extended periods. The foldable design makes it convenient for you to carry your headphones anywhere and anytime you want music.
Flat battery? Extend the fun endlessly with the included audio cable.
Download the free JBL Headphones App to tailor the sound to your taste by choosing one of the pre-set EQ modes or adjusting the EQ curve according to your content, your style, your taste. Voice Prompts in your language guide you through the Tune 720BT’s other features.
FAQs & How-Tos
7 results
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
Press volume + and volume - simultaneously for 5 seconds to reset.
The headphone must be ON while doing this.Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback! -
Visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback! -
This product features Multi-Point Connection which allows you to be connect to two devices at the same time. Effortlessly switch from listening to music on your portable device to a call from your phone.
To connect to two devices at the same time:
1. Power on your product.
2. Make sure that the device you wish to connect to has the BT settings on and within range.
3. If this is the first time connecting your product, you will notice a flashing LED to indicate that it is searching for a device to connect to. (If this is not your first time, your product will automatically reconnect to the last device it was connected to)
4. Under your BT settings, go to discoverable devices and the product name should pop up within a few seconds. Depending on the device you are using, you may have to tap on the product to complete the connection.
5.Now that you are connected to the first device, push the BT button on the product to connect to the second device. The product should start searching for the second device by displaying a flashing LED.
6. Go to your BT settings on your second device. The product should pop up on your discoverable devices should pop up within a few moments.
(Please Note: If the product does not show up on your discoverable devices while it is in pairing mode, quickly turn off your BT settings and turn it back on. This will typically result in resetting the BT search in which your product should pop up on discoverable devices within a few moments)
Was this helpful? Thank you for your feedback! -
This headphone is supported by the My JBL Headphones App.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00