JBL Everest 100
In-ear Wireless Headphones
Sold from 2015 until now
Getting started with your JBL Everest 100
Documents & Downloads
Specifications
- Bluetooth
- Dynamic frequency response range
- 10-22kHz
- Driver sensitivity
- 96dB/1kHz, 1mW
- Maximum SPL
- 103dB
- Rated power input
- 5mW
- Microphone sensitivity
- –42dBV/Pa
- Battery type
- Polymer Li-ion Battery (3.7V, 50mAh x 2)
- Music play time with BT on
- up to 8 hours
- Frequency Response
- 10-22kHz
- Weight (g)
- 16
- Earbud dimension W x H x L (mm)
- 14.7 x 14.8 x 30.4
- Mic housing dimension W x H x L (mm)
- 9.1 x 7.2 x 42.3
- Driver
- 5.8mm
- Driver
- 5.8mm
Ultimate Sound Unbound
JBL EVERESTTM 100 is legendary sound in an on-the-go design. Bluetooth 4.1 technology enables wireless connectivity, JBL Pro Audio Sound delivers a dynamic listening experience, and ergonomic earpieces allow for unprecedented fit, and comfort in your ears. A rechargeable battery offers 8 hours of performance, and its built in microphone with echo cancellation technology provides more natural sounding voice calls. Enjoy ultimate sound – unbound.
FAQs & How-Tos
-
The Elite headphones are equipped with an auto off capability to preserve battery life when not in use. The headphones will automatically turn off after 10 minutes of inactivity: meaning no audio or voice. In situations where the user would like to enjoy the benefits of the ANC technology only - when not listening to music or talking on the phone , we advise to turn off the Auto Off feature in the app to keep the headphone running continuously.Was this helpful? Thank you for your feedback!
-
No, this is not possible. Siri is activated by pressing the play-button for some seconds. Since the play-button on the headphone doubles as on/off button, pressing and holding it will simply turn the headphone off.Was this helpful? Thank you for your feedback!
-
The EVEREST models 100, 300 and 700 are all updated with the HID (Human Interface Device) tool, available in the download section for each model. This tool works with Windows computers only. The EVEREST ELITE models are updated with a USB tool available on the special Everest web page. This tool is available in both an Apple MAC OS version and a Windows version. This USB tool update is used for the first production run of ELITE models ONLY, and only once! All later production runs, and all updates after this first USB update, will take place wirelessly through the My JBL Headphone app, made for iOS and Android.Was this helpful? Thank you for your feedback!
-
The app works with the Everest Elite models only.Was this helpful? Thank you for your feedback!
-
Yes, ANC needs to be ON.Was this helpful? Thank you for your feedback!
-
Each headphone is shipped with a micro USB charging cable. USB is the only way to charge the headphones, and all normal USB chargers may be used.Was this helpful? Thank you for your feedback!
-
No, the tool will tell you to switch them ON when necessary.Was this helpful? Thank you for your feedback!
-
It is not a bad idea to have the headphone charged before updating, but only if it is completely empty will there be any difference. To update via cable, a USB cable connection must be established between the headphone and the computer, and since the cable is also used for charging, there will be power to the headphone as long as it is connected to the computer. If the battery is depleted, it may be necessary to wait a little while, until a basic level of charging has been reached. Please note that the ELITE models with the most recent software permit wireless upgrade, directly from the control app on a smartphone. In this case, it is of course necessary to have power enough in the battery to sustain the whole upgrading process, since it takes place without cable.Was this helpful? Thank you for your feedback!
-
Yes , all 5 models have voice prompts. The Elite models have the added option of turning off the voice prompts in the settings menu of the app. The Everest 300 and 700, as well as the successors 310 and 710, have the option of choosing between voice prompts and tone prompts. This is how you do it: Switch the headphones ON. Press and hold the Shareme and the Volume Plus buttons for about two seconds. Switch the headphones OFF. You will now hear the OFF prompt having changed to the prompt you did not use before, and you will hear this one until you change it again.Was this helpful? Thank you for your feedback!
-
Switch the headphone ON, then press both volume buttons (VOL + and VOL-) at the same time, and hold them for 5-6 seconds. The headphones are now reset to factory default.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+44 161 222 3325
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00
Chat with us
Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00