AVR 700
Audio/Video Receiver With Dolby TrueHD & DTS-HD Master Audio & HDMI 1.4 (75 watts x 5) 5.1
Sold from 2012 until now
Predecessor Product: | AVR 1565 |
---|---|
Made in: | China |
Documents & Downloads
Specifications
- Power Consumption (full power/idle)
- less than 0.5W (standby); 280W maximum
- Multichannel Power (all channels driven)
- 75W per channel, two channels driven @ 6 ohms, 20Hz – 20kHz, less than 0.1% THD; 100W per channel, two channels driven @ 6 ohms, 1kHz, less than 1% THD
- Continuous Average Power (FTC) per Channel (surround modes)
- 75W per channel, two channels driven @ 6 ohms, 20Hz – 20kHz <0.01% THD
- Continuous Average Power (FTC) per Channel (surround modes)
- 100W per channel driven @ 6 ohms, 1kHz, <1% THD
- Input Level/Impedance
- 200mV/47k ohms
- Signal-to-Noise Ratio
- 95dB (IHF-A)
- Surround System Adjacent Channel Separation
- Dolby Pro Logix/PLII... 40dB
- Surround System Adjacent Channel Separation
- Dolby Digital... 55dB
- Surround System Adjacent Channel Separation
- DTS... 55dB
- Frequency Response
- 10Hz – 100kHz
- High Instantaneous Current Capability (HCC)
- ± 25 Amps
- Power Requirements
- 120V AC/60Hz
- Power Consumption
- 280W Maximum; <0.5W Standby
- Usable Sensitivity (IHF)
- 1.3?V/13.2dBf
- Frequency Range (MHz)
- 87.5 – 108.0MHz
- Usable Sensitivity (Loop)
- 500?V
- Output Level/Impedence (ohm)
- 1Vp-p/75 ohms
- Surround system adjacent-channel separation:
- Dolby Pro Logic/PLII: 40dB Dolby Digital
- Input Level/Impedence (ohm)
- 1Vp-p/75 ohms
- Signal-to-Noise Ratio (Mono/Stereo dB)
- 65dB/62dB
- Input Sensitivity/Impedence
- 200mV/47k ohms
- Signal-to-Noise Ratio (dB)
- 45dB
- Stereo Separation @ 1kHz (dB)
- 35dB @ 1kHz
- Selectivity (±10kHz):
- 30dB
- Distortion (Mono/Stereo)
- 0.2%/0.3%
- High Instantaneous Current Capability
- ±25 amps
- Signal-to-noise Ratio (IHF-A) (dB)
- 95dB
- Frequency Range (kHz)
- 520 – 1720kHz
- Width (mm)
- 440
- Depth (in)
- 13
- Weight(kg)
- 9.1
- Width (in)
- 17-5/16
- Height (in)
- 5-1/2
- Height (mm)
- 125
- Depth (mm)
- 330
- Weight
- 20 lb (9.1kg)
- Television Format
- NTSC
- Video Frequency Response (Component Video)
- 10Hz – 8MHz (–3dB)
- IF Rejection (dB)
- 80dB
- Image Rejection (dB)
- 80dB
- Input Level/Impedance
- 1Vp-p/75 ohms
- Output Level/Impedance
- 1V/75 ohms
- Video Frequency Response
- 10Hz – 8MHz (-3dB) composite video only
- HDMI
- witn 3D and 12-bit Deep Color
- Frequency Range
- FM... 87.5 – 108.0MHz
- Usable Sensitivity
- FM... 1.3V/13.2dBf
- Signal-to-Noise Ratio
- FM... 65dB/62dB (Mono/Stereo)
- Distortion (Mono/Stereo)
- FM... 0.2%/0.3%
- Stereo Separation
- FM... 35dB @1kHz
- Image Rejection
- FM... 80dB
- IF Rejection
- FM... 80dB
- Frequency Range
- AM... 520kHz – 1720kHz
- Signal-to-Noise Ratio
- AM... 45dB
- Usable Sensitivity
- AM... 500V in loop
- Selectivity
- AM... 30dB @(10kHz)
- Power Requirement
- 120V AC/60Hz
Awaken your inner cinephile.
A premium home theater experience is within your reach. The Harman Kardon® AVR 700 delivers a fully immersive, 5.1-channel, surround-sound experience while playing high-definition sources at maximum quality. HDMI® technology with 3D and Audio Return Channel connections allows you to watch your favorite films as if you were in a movie theater. Dolby® TrueHD and DTS-HD Master Audio™ decoding technology deliver the most realistic sound possible, no matter what your home theater setup is like. Enjoy movies at home as never before. Experience the Harman Kardon AVR 700.
FAQs & How-Tos
-
There are five possible reasons for the receiver shutting down. 1. There is a problem internally with the receiver. 2. There is a problem with one or more of your speakers. 3. There is a problem with one or more of your speaker wires. 4. There is a problem with the speaker wiring done on your system. 5. The unit is overheating. No ventilation. First, check the wiring at every speaker terminal at the back of your receiver and at the back of your speakers. A single strand of speaker wire crossing from one terminal to another would be enough to cause the amp to shut down or go into PROTECT. If you do not find any problems with any of the wiring, you should disconnect all speakers from your receiver. If the receiver continues to go into PROTECT, the problem is in the receiver. Please submit a case on the Contact Us page. They will be able to assist you. However, if it turns on, the problem is elsewhere. Begin reconnecting one speaker at a time. Eventually you will connect a speaker that will cause the receiver to shut down. At this point you have found your culprit. On the other hand, it may just be overheating. You must have at least 2 - 3 inches of space between the top of the unit and any shelf or component above the unit. The unit should not be inside a sealed compartment when being used. The unit must be able to breath. There are very powerful amps in these receivers. If they run too hot, they will shut down. An external fan can help this.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+44 161 222 3325
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00
Chat with us
Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00