Support Overview / Home Audio / Receivers / Receivers - Surround Sound / AVR 660

AVR 660

7 x 75W 7.1-ch AV receiver with HDMI 1.4, The Bridge II included

Sold from 2009 until 2011

Made in:	China

Documents & Downloads

Manuals

Other

Spec Sheet (English) 2.47 MB

Specifications

General Specifications

Type: 7.2-Channel AVR

Continuous Average Power (FTC) per Channel (stereo mode): 90 x 2 / 20Hz – 20kHz, 8 ohms, both channels driven

Continuous Average Power (FTC) per Channel (surround modes): 75 x 7 / 20Hz – 20kHz, 8 ohms, all channels driven

Amplifier Type: High-Current ±50 amps

Total Harmonic Distortion: 0.07% @ 8 ohms

Bandwidth: 20Hz – 20kHz

Bandwidth @ 1W (-3dB): 10Hz – 130kHz

Signal-to-Noise Ratio: 100dB (IHF-A)

Power Supply: Independent front & rear

Surround Modes: Dolby Digital Plus, Dolby TrueHD, Dolby Digital EX, Pro Logic IIx, Dolby Virtual Speaker, DTS-HD, DTS-HD Master Audio, DTS 5.1, DTS-ES 6.1 Discrete & Matrix, DTS 96/24, DTS Neo...6, Logic 7

Headphone Modes: 2-Channel, Dolby HP

Multizone Capability: Audio/video, with remote

Assignable Rear-Channel Amplifiers: Yes

A-BUS Ready: Yes

EzSet: EzSet/EQ

S-Video/Component Video Inputs: 4

Analog Audio Inputs: 6

Digital Audio Inputs: Rear panel 3/3

Digital Audio Inputs: Front panel 1/1

Digital Audio Outputs (Coax/Optical): Rear panel 1/1

USB Port: Yes

Ethernet Input: Yes

Digital Input Polling: All video inputs

Direct Audio Inputs: 7.1

DMP The Bridge II Input: Yes

HDMI: 1.3a With audio/video processing

HDMI: Inputs... 4

HDMI: Output... 1

Preamp Outputs: 7.1 Channels

Component Video Inputs (Assignable): 3 @ 100MHz

Bass Management: Quad crossover

On-Screen Display: Yes, on HDMI and component

Input Titling: All inputs

DSP Processor: Dual TI DA 710

Output DACs: 192kHz/24-bit

Video Processing / Conversion: Faroudja DCDi Cinema/scaling to 1080p

High-Resolution GUI: Yes

A/V Sync Delay: 200mS

IEC Detachable Power Cord: Yes

System Remote: 8-Device, backlit, learning & preprogrammed

IR In/Out Jacks: Yes

IR Carrier Output: Yes

Discrete Remote On/Off Codes: Yes

Low-Voltage Trigger Jacks: 2

External Data Port: USB and RS-232

Speaker Terminals: Color-coded binding posts

Dimensions

Weight: 18.6kg

Dimensions (H x W x D): 151mm x 440mm x 351mm

With Dolby Volume technology that automatically adjusts volume levels when you switch between sources and channels, four HDMI inputs, Faroudja DCDi Cinema video processing, all the latest Dolby and DTS audio modes, our own Logic 7 processing, the EzSet/EQ system for precise room calibration, and both USB and iPod connectivity, the AVR 660 is an unusually versatile performer, and its full-color graphical interface makes it an exceptionally friendly one. The AVR 660 easily enables multizone audio setups. It automatically corrects annoying “lip sync” problems with both HDMI Lip Sync capability and manual A/V Sync Delay. Front-panel A/V inputs make video gaming more convenient (not to mention more exciting). And an eight-device learning and programmable remote puts all of the AVR 660’s capabilities at your fingertips.