How To

Support Overview / How To

How To

1676 results

Sort

Page size

Problems connecting to WiFi network using an iPhone

If you are experiencing issues when setting up your HK Citation Oasis to your WiFi network using the Google Home app, then please turn Bluetooth off on your phone, then turn Bluetooth back on again and try the setup again.

Was this helpful? Thank you for your feedback!
Pulse 4: Light Show has Low Intensity

The intensity of the light show is dependent on the amount of audio signal being sent into the unit.

If you are experiencing a light show that doesn't move around very much, it is likely that you are not using a feature on your phone called Bluetooth Absolute Volume*. This means that the volume of your phone/tablet/device is controlled independently from the volume of the speaker.

So, if you have the Pulse 4 set to maximum volume or close to it, but the volume on your device is set at a low level, the light show will show little to no effect. All you have to do is reverse it. Turn up the volume on the device to the maximum and set the Pulse 4 to the desired volume. This will send the correct level to the speaker and the light show will show plenty of effect. This also benefits the sonic quality as well. Therefore, we recommend always having the volume on your device turned up to a high level and then adjusting the volume level on the speaker itself. This way you'll be able to enjoy the light show while also getting good audio quality. Or, if possible, setup your device for Bluetooth Absolute Volume*.

*BLUETOOTH ABSOLUTE VOLUME: Most phones/tablets/devices now use Bluetooth Absolute Volume (a.k.a. volume sync) by default. This is a feature that synchronizes the volumes of the device and the speaker, and allows the speaker volume to be controlled by changing the volume on either the device or the speaker. The volume being sent from the device is fixed at full volume.

Was this helpful? Thank you for your feedback!
Pulse 4 Firmware Version Information
A new firmware version has been released for the Pulse 4 (Version 0.5.1.0), below is a list of the improvements:
1. Supports Bluetooth 5.1 profile.
2. Improves the stability of stereo setup using the JBL Portable* app.
3. Improves compatibility with Mac computers.
4. Enhances light show synchronization with music.
The firmware update is installed as an OTA update:
1. Download and install the JBL Portable* app from the Google Play/App Store.
2. Connect your Pulse 4 to your phone/tablet through Bluetooth.
3. Open the JBL Portable app and wait for the Pulse 4 to appear.
4. On the Pulse 4 screen, select settings (gear cog symbol).
5. Proceed with installing the firmware update.
*JBL Portable is the new name for the JBL Connect app, the name will change in January 2021.
Was this helpful? Thank you for your feedback!
Pulse 5 - Factory Reset

Press and hold the Light Show & Bluetooth buttons together for > 2 seconds.

Was this helpful? Thank you for your feedback!
Pulse 5 - Factory Reset

Press and hold the Light Show & Bluetooth buttons together for > 2 seconds.

Was this helpful? Thank you for your feedback!
QUANTUM DUO: Software Update Release Notes
QUANTUM DUO
Software Update Release Notes
------------------------------------------------------------------------
Version: V46
Release Date: August 31, 2022
Release Media: USB
Filename: JBL Quantum Duo SW release V46.zip

What's New
1. We have improved the volume synchronization between the Quantum DUO and Windows OS, which give the user a better sound experience
NOTE: Instructions to perform the software update via USB are included in the zip file.

------------------------------------------------------------------------
------------------------------------------------------------------------

QUANTUM DUO
Software Update Release Notes
------------------------------------------------------------------------
Version: V44
Release Date: December 15, 2021
Release Media: USB
Filename: JBL Quantum Duo SW release V44.zip

What's New
1. Allow user to disable the auto standby feature via long pressing lighting pattern and right color selection button for >10 seconds
2. General Software Improvements
NOTE: Instructions to perform the software update via USB are included in the zip file.
Was this helpful? Thank you for your feedback!
QUANTUM ENGINE: Software Update Release Notes
QUANTUM ENGINE
Software Update Release Notes
------------------------------------------------------------------------
Software Version: V1.11.0.1511
Release Date: September 19, 2022
Release Media: Website & Quantum ENGINE

What’s New
1. Improved firmware stability upgrading process flow for the QUANTUM 910.
------------------------------------------------------------------------
------------------------------------------------------------------------

QUANTUM ENGINE
Software Update Release Notes
------------------------------------------------------------------------
Software Version: V1.11.0.1510
Release Date: August 24, 2022
Release Media: Website & Quantum ENGINE

What’s New
1. Added support for the new QUANTUM 910 Wireless Headphones
2. Over 30 improvements addressing user interface, usability, and stability of the app for a better user experience.
Was this helpful? Thank you for your feedback!
Quantum Engine: Software Update Release Notes
QUANTUM ENGINE

Software Update Release Notes

Version 1.6.0.1053
Release Date: 1/21/21
1. Welcome feature has been implemented.
2. Surround Modes feature has been implemented.
3. ANC/TT toggle has been implemented.
4. The sidetone has been turned off by default for all models to avoid confusion.
5. QuantumSURROUND/QuantumSPHERE quality & performance have been improved.
6. Quantum 300 Mic Gain has been improved.
7. Quantum 800 FW update reliability has been improved.
8. Minor Bugs Fixed
Was this helpful? Thank you for your feedback!
QUANTUM STREAM STUDIO: Software Update Release Notes
QUANTUM STREAM STUDIO

Software Update Release Notes

------------------------------------------------------------------------

Version: 1.4.9

Release Date: January 13th, 2025

Release Media: OTA (over the air) Update via JBL QuantumENGINE

What’s New
1. Zoom USB Certified
2. Stability and performance improvement
Was this helpful? Thank you for your feedback!
QUANTUM STREAM TALK: Software Update Release Notes Correct
QUANTUM STREAM TALK
Software Update Release Notes
------------------------------------------------------------------------
Version: 1.4.9
Release Date: January 13th, 2025
Release Media: OTA (over the air) Update via JBL QuantumENGINE

What’s New
1. Zoom USB Certified
2. Stability and performance improvement
Was this helpful? Thank you for your feedback!
Quantum TWS: How does Sidetone work when either Ambient Aware or TalkThru is turned on?

It is not possible to have Ambient Aware or TalkThru activated at the same time as Sidetone when the microphone is turned on during a call. This is the case no matter if you are using Bluetooth or the 2.4 GHz mode.
You can use Ambient Aware during a call if Sidetone is turned off. You are able to do this in both Bluetooth or the 2.4 GHz mode.
All three audio modes are activated if the microphone on your device is turned off no matter if you are using Bluetooth or the 2.4 GHz mode.

Was this helpful? Thank you for your feedback!
Re-broadcasting any TV or Movie signal from your OMNI BAR+ or ADAPT+

No, that is not possible. However, you can create a 5.1 wireless surround system to extend your TV or movie sound. All you need is two additional OMNI+ speakers, such as 2 x OMNI 10+, OMNI 20+ or OMNI 50+.

Was this helpful? Thank you for your feedback!