How To
How To
1682 results
-
Yes, the app only works when the headphone is powered ON and paired to a source device that has the app available.Was this helpful? Thank you for your feedback!
-
If the audio is not centered to your monitor, then you can re-center your headset by doing the following: 1. Position yourself in front of your monitor. 2. Press the re-centering button on the side of your headset (button that looks like a circle) 3. The head-tracking sensor will start the automatic calibration.Was this helpful? Thank you for your feedback!
-
InfinityLab 5,000 power bank is 18.65Wh, and 10,000 power bank is 38.5 Wh.
For all versions available (Lightning, USB-C and Wireless).Was this helpful? Thank you for your feedback! -
To clean your LINK BAR, use a soft dry Microcloth to remove dust and dirt.
We wouldn't recommend using any alcohol as it may harm the product.Was this helpful? Thank you for your feedback! -
It is true that some Bluetooth products have a very loud BT acknowledgment tones. We are sorry, but the level of such tones cannot be changed, and no software solutions will appear.Was this helpful? Thank you for your feedback!
-
The InfinityLab power bank support Power Delivery 3.0 to provide you with a fast charging experience.Was this helpful? Thank you for your feedback!
-
The InfinityLab power bank should work with most devices and we have provided a list of normal devices on each model’s product page.Was this helpful? Thank you for your feedback!
-
Be aware that the BDS X75 and X77 have two power modes. By pressing the power button briefly, the unit goes into sleep mode, and the fan keeps cooling the unit. Holding down the power button for a couple of seconds puts the BDS into standby, and the fan stops.Was this helpful? Thank you for your feedback!
-
- HIGH is recommended for Airplanes, City Streets, or other noisy environments.
- LOW is suited for lower noise or windy environments.
- ADAPTIVE will automatically adjust the noise-canceling based on your immediate environment.
- OFF provides passive noise isolation.
Was this helpful? Thank you for your feedback! -
Please note that the digital signal cable for N90Q, which also serves as the charging cable, has a special full-size USB plug that can be inserted the wrong way as well as the correct way into the computer. Always check that charging is actually taking place, by making sure that the charging control light comes on when the USB cable is connected. The amber charging control light is inside the calibration button.Was this helpful? Thank you for your feedback!
-
If there isn't any input for 10 minutes, the ESQUIRE 2 will go into sleepmode, and after 20 minutes more of no activity, it will power itself off.Was this helpful? Thank you for your feedback!
-
Your model AVR is equipped with a cooling fan that only comes on when the unit's internal temperature rises above a predetermined limit. Thanks to the massive heat sinks used in the AVR series, this temperature is rarely reached. A typical situation where the fan will come on is when the AVR is operating at a very loud volume level with program material that has sounds in all seven channels. Since this is a rare occurrence, you may never notice the fan working. In any case, when the fan does come on, the volume will be loud enough that you might not notice it. Thus, you may own an AVR for many years and never hear the fan, or see it in operation. There is no way to test the fan, and none is needed.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00