How To

Support Overview / How To

How To

1676 results
  • What Dac Chip is used in the Mark Levinson No. 526?
    The ML No. 526 uses the ESS SABRE ES9018K2M chip.
  • What Devices are Compatible with my UA Sport Wireless Headphones?
    Any device that has Bluetooth capabilities and supports A2DP stereo audio streaming will be compatible with the Under Armour Sport Wireless headphones
  • What devices are compatible with the N20LT headphones?
    Because the headphone features a lightning connector, it is compatible with IOS devices only.
  • What does "HVS" mean? I can see it as an option for surround modes.
    HVS is short for Harman Virtual Surround. This signal processing system can simulate surround effect from a stereo source.
  • What does HARMAN volume do?
    With HARMAN Volume you can set your desired volume between low, medium and high. You can listen to your audio without sudden distracting changes such as blasts from ads, and volume variations as you switch between channels on your TV. Other benefits include full sound effects even at low volumes, this means if you are watching movies (DVD, BlueRay disc) and HARMAN volume is set to low volume, then the signal is more compressed, than what the other volume levels is. This will allow you to hear natural, consistent sound at low volume level, and not only hearing voice conversation from movies, giving you the same movie experience just with lower volume. What is best for you is a matter of personal preference, so we recommend playing around with the three different levels.
  • What does tangle-free cable mean?
    The woven part of the cable is tangle-free, meaning that in daily use, you can put the headphone in your pocket, without having to untangle a cable knot afterwards. Note that the left and right section is smooth, not tangle-free. This is because woven cord would tend to make noise when rubbing against clothes.
  • What does the + indicate?
    The product + indicates splashproof.
  • What does the Audio Feedback button do?
    Audio feedback turns on tones that let you know that something is happening on the product. When Audio feedback is ON, you will hear tones for: 1: Bluetooth Pairing. 2: SoundShift on/off. 3: JBL Connect Pairing Mode (Boost TV only)
  • What does the Audio Sync function do?

    Sometimes, when the soundbar is connected to a digital TV, the audio may not synchronize with the video. If the video is behind the audio, adjust the audio delay time to match the video.

    You can set the audio delay time between 0 msec and 250 msec.

    Note: The audio delay time you specify may not be exact, depending on the played content.

    The audio sync function will not resolve instances where the video is ahead of the audio.

  • What does the Audio Sync function do?
    Sometimes, when the soundbar is connected to a digital TV, the audio may not synchronize with the video. If the video is behind the audio, adjust the audio delay time to match the video.
    You can set the audio delay time between 0 msec and 250 msec.
    Note: The audio delay time you specify may not be exact, depending on the played content.
    The audio sync function will not resolve instances where the video is ahead of the audio.
  • What does the LED light show during charging?
    During charging, the LED lights red constantly. When it is fully charged, the LED goes out. No light.
  • What does the LED show when charging is complete?
    There is a constant red light in the LED while charging takes place. When charging is complete, the diode goes dark.
  • What does the Moment button do?
    It is a personalization feature that allows you to customize your favorite music track, auto-off timing, and music volume.
    Once set up, you can directly access it through the remote control or within the JBL ONE App.
  • What does the Sound Calibration function do?

    The calibration sound setup process ensures the soundbar delivers the best 3D surround effects for any interior and room layout.

  • What does the Sound Calibration function do?
    The calibration sound setup process ensures the soundbar delivers the best 3D surround effects for any interior and room layout.
  • What does the Sound Feedback button on the HK SB20 remote control do ?
    The sound feedback is the tone you hear when you send a command to the soundbar. This confirmation tone can be switched off, if you do not want it to be heard.
  • What does the three Wi-Fi bars indicate?
    The Wi-Fi indicator shows the signal strength between your speaker and Wi-Fi router. 3 bars = perfect signal 2 bars = good signal 1 bar = low/poor signal (which might cause dropouts or other issues)
  • WHAT DO I DO IF I AM HAVING TROUBLE PAIRING MY NO5909 HEADPHONE TO MY DEVICE?
    If the headphones and source device do not pair:
    1. Make sure the headphones are NOT connected to the charger. Cycle power switch OFF and ON.
    2. Turn Bluetooth® OFF, then ON again on the source device.
    3. Turn OFF Bluetooth® feature on any other device that is paired with the headphones.
    4. Press and Hold the ON/OFF button for >5 seconds until white status light pulses.
    5. Make sure “No 5909" is selected in the Bluetooth® source device list.
     
  • What do I need to create a 5.1 wireless surround system with my OMNI BAR+?
    All products must be on Wi-Fi 5GHz network, and you need two additional OMNI+ speakers of the same model (2 x OMNI 20+ for example) to create 5.1 wireless surround sound.
  • What do the battery LED's mean on my JBL LINK 10 and LINK 20?
    The battery LED's show how much the battery is charged on your LINK 10 or LINK 20 speaker.
  • What do the buttons do on the Vi Personal Trainer?
    (+) Button A short press will increase the volume. A long press will skip to the next track. (-) Button A short press will decrease the volume. A long press will skip back a track. Middle (Multifunction Button) A short press will play/pause music or answer/end calls. A long press on the middle button will turn the device on/off.
  • What do the LED colors mean?
    Here is a list of what the LED lights mean. Light OFF: Power OFF, no charger connected, OR charger connected, fully charged. RED light ON: Power OFF, charger connected and charging. BLUE light flashing: Power ON, no Bluetooth connected. Constant BLUE light: Power ON, connected to Bluetooth device. RED/BLUE light flashing: Power ON, in pairing mode. RED light flashing: Power ON, low battery.
  • What do the LED indicators show?
    Power button, no light: Product is OFF. Power button, constant light: Product is ON. Power button: constant white, when no Bluetooth device connected. Power button, flashing blue in Bluetooth pairing mode. Power button, constant blue light: Bluetooth connected. Battery indicator LEDs: Five LEDs show battery level. When charging, the blinking LED shows how far charging has progressed. When fully charged, the LED lights will turn off. JBL Connect button flashes white in connection mode. When connected: constant light.
  • What do the leds indicate on my JBL Boombox?
    Power button, no light: Product is OFF. Power button, constant light: Product is ON. Power button: constant white, when no Bluetooth device connected. Power button, flashing blue in Bluetooth pairing mode. Power button, constant blue light: Bluetooth connected. Battery indicator LEDs: Five LEDs show battery level. When charging, the blinking LED shows how far charging has progressed. When fully charged, the LED lights will turn off. JBL Connect button flashes white in connection mode. When connected: constant light.
< 1 ... 58 59 60 61 62 ... 71 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +44 161 222 3325

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00

message

WhatsApp Us

Send us a message on +44 161 222 3325 or click  here 

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00