How To

Support Overview / How To

How To

1674 results

Sort

Page size

HOW DO I PAIR MY No5909 HEADPHONES TO MY DEVICE?

Hold the Power ON/OFF button down for >5 seconds. Status light will pulse White when headphones are in pairing mode. Release. Access Bluetooth settings on your source device. Locate "№ 5909" and connect. A solid white light indicates you are connected.

Was this helpful? Thank you for your feedback!
HOW DO I PAIR MY No5909 TO TWO OR MORE DEVICES?

1. Enter pairing mode and connect to device 1. 2. Enter pairing mode again and device 1 will disconnect. 3. Connect to device 2 and turn headphone off. 4. Turn headphones on and headphones will automatically connect to device 1 and 2 simultaneously. 5. Pause one device and play from the other to swap headphones connection. NOTE: Maximum number of devices that can be connected at any given time - 2 source devices.

Was this helpful? Thank you for your feedback!
How do I pair my phone with this amplifier?

Simply hold Bluetooth button on the remote and once its start flashing, on your device go to your Bluetooth settings and look for the gtr amp and pair it.

Was this helpful? Thank you for your feedback!
How do I pair my subwoofer?

The SB450 soundbar is paired to the subwoofer right out of the box. If the 2 parts are not already paired together, simply press the Pairing buttons on the rear panel of both products and they will connect with each other.

Was this helpful? Thank you for your feedback!
How do I pair the Flip 3 SE with a different device?

Power on the Flip 3 SE and press the Bluetooth button. The Flip 3 SE should be available in the list of Bluetooth devices on your mobile phone/tablet.

Was this helpful? Thank you for your feedback!
How do I pair the subwoofer to my JBL BAR soundbar if pairing does not happen automatically?

Normal pairing is automatic, and happens when you first switch both devices on. If pairing does not take place automatically, or you have to force new pairing, here is what to do: Turn on the soundbar and the subwoofer. If the connection is lost, the LED indicator on the subwoofer blinks slowly. Second, press the CONNECT button on the subwoofer to enter pairing mode. The LED indicator on the subwoofer blinks quickly. Third, press and hold the DIM DISPLAY button on the remote control for 5 seconds, followed by short press on BASS+, and BASS- button in sequence. Panel display will show “PAIRING”. If pairing succeeds, the LED indicator on the subwoofer lights up, and the soundbar display will show "DONE”. If pairing fails, the indicator on the subwoofer blinks slowly. Lastly, if the pairing fails, repeat the steps above. If you have continued trouble performing the pairing, please try to switch off all wireless devices in the home, then try again. This means routers, TV sets with wireless functions, telephones, computers etc. Since overcrowding on the 2.4 GHz frequency now often causes problems, eliminating all this activity makes space for the Bar to establish its connection, and you should be able to pair without problems. Afterwards, you can switch your devices on again. Often, all will now work fine, and if not, you will know which devices are doing the interference.

Was this helpful? Thank you for your feedback!
How do I pair to a different device on the Endurance Series headphones?

To pair to a different device, double tap and hold your finger on the JBL logo for 5 seconds until you see the LED light flash blue. Make sure that the device you are trying to connect to is in range and in pairing mode. You should see the Endurance headphone pop up on your discoverable devices within a few seconds and the flashing LED light should now be a solid blue.

Was this helpful? Thank you for your feedback!
How do I pair to a different device when using the UA Sport Wireless Flex?

In order to pair to a different device, make sure the headphones are turned off. Proceed to press and hold the power button located on the LEFT arm of the neckband. You will hear the audio voice prompt state, “powering on” Continue to press and hold the power button for 3-5 seconds or until you hear the voice prompt state, “looking for device.” Make sure that the device you are attempting to connect to is in the Bluetooth search mode and within range. UA | JBL Flex should appear on your device within 3-8 seconds. Once you choose this option on your discoverable devices, it will connect and the voice prompt will state “Connected”

Was this helpful? Thank you for your feedback!
How do I pair to multiple devices on the N60NC Wireless?

On the Right ear cup, slide the bluetooth button towards the down position and hold until you see the fast blinking blue LED light. Make sure that the device that you are trying to connect to is in pairing mode. It should recognize the N60NC Wireless within a few seconds. You should here the audio "chime" when it is connected and the LED should change to a slow blinking light.

Was this helpful? Thank you for your feedback!
How do I play via Bluetooth on HK 3770?

1. Place the 3770 in Bluetooth input mode with the BT button on the front panel or the remote. 2. Do a BT search on the phone, until you find HK3770. Then pair with it. 3. Now you can select the HK3770 as audio source on your phone, depending on the phone. On some phones, you can simply begin to play music after performing the pairing, and the HK3770 will play, if it is in Bluetooth input mode, shown on the front panel display. 4. You can control play/pause etc. from either your phone or from the HK3770 remote control. If you want to use the HK3770 remote, you must first press the STEREO Button on the remote control in order to activate the correct remote codes. Now a press on the PAUSE Button on the HK3770 remote will pause the music by placing your phone on pause, and you can restart play by pressing the PLAY Button. 5. To pair another source to HK3770, first deactivate BT on the source presently paired to release new pairing.

Was this helpful? Thank you for your feedback!
How do I power on and off the headphones?

Press and hold the center button on the inline microphone located below the right earpiece. It helps to have one of the ear inserts in your ear to listen to the audible voice prompts. If this is your first time using the headphones, the headphones will automatically go into search mode. You will hear the audible voice stating, “power on” followed by “looking for device”. To power off, press and hold the center button on the inline microphone until you hear the audible voice stating, “power off.” The flashing LED light should change to a solid red light before completely turning off.

Was this helpful? Thank you for your feedback!
How do I power on and off UA Sport wireless headphones?

Press and hold the center button on the inline microphone located below the right earpiece. It helps to have one of the ear inserts in your ear to listen to the audible voice prompts. If this is your first time using the headphones, the headphones will automatically go into search mode. You will hear the audible voice stating, “power on” followed by “looking for device”. To power off, press and hold the center button on the inline microphone until you hear the audible voice stating, “power off.” The flashing LED light should change to a solid red light before completely turning off.

Was this helpful? Thank you for your feedback!