How To
How To
1676 results
-
This product features up to 10 hours of playtime depending on the content and volume level you are listening to.
Battery Charging Time is 3 hours at 5V, 0.5AWas this helpful? Thank you for your feedback! -
The Boombox 2 features the same battery capacity as the first generation Boombox. The Boombox 2 battery specs have recently been changed in measurement specifications but still provides up to 24 hours of audio playback.Was this helpful? Thank you for your feedback!
-
Under normal usage, the battery should remain at 80% capacity after 300 charge cycles.
What is a charge cycle?
Your power bank is 100% charged, and then one cycle means when you discharge the device to 0% and charge it all the way up to 100%. That is one full charge cycle.Was this helpful? Thank you for your feedback! -
Installation of a powered subwoofer/speaker in an automobile requires specific knowledge and experience. If you’ve read the manual and do not feel comfortable performing the installation and setup yourself, we recommend that installation be carried out at a specialized center by a professional.
Was this helpful? Thank you for your feedback! -
The BASSPRO GO uses the original Connect feature. It is not compatible with devices using the Connect+ or PartyBoost feature. You can connect up to two BASSPRO GO speakers to each other using Connect, or you can connect a single BASSPRO GO to other JBL speakers that have the same Connect feature, like the Xtreme, Charge 3, Flip 3, and Pulse 2.
Was this helpful? Thank you for your feedback! -
The BASSPRO GO receives is power ONLY from the harness that is connected to the car battery. When connected to the harness, the car battery will charge the internal battery so that it is ready to be used as a portable the next time you need it.
When removed from the harness, the full-range portable speaker runs on the internal battery. It cannot be charged via either of the USB (A or C) jacks. It will be charged the next time it is connected to the harness in the vehicle.
Was this helpful? Thank you for your feedback! -
A dedicated bass boost button located on the RIGHT ear cup on the CLUB 950NC & 700BT increases low-end frequencies of 5-6 dB adding a kick to your favorite tracks.Was this helpful? Thank you for your feedback!
-
The Mute+ATMOS combination button press to determine the Battery Status was originally designed for production line testing, not for consumer usage. We determined that this testing method was inaccurate and began testing using specialized external equipment. As of Software Version V21.13.11.80, the ability to check Battery Status inaccurately has been removed.
When charging the satellite speakers you can be confident that the Battery Status is 100% when the LED indicator goes out. As well, when the LED begins blinking red, you are at 20% and should recharge or plug in your speakers.Was this helpful? Thank you for your feedback! -
BAR 9.1
Software Update Release Notes
------------------------------------------------------------------------
Version: V22.01.31.80
Release Date: May 19, 2022
Release Media: OTA (over the air) Automatic Upgrade and/or USB
Filename: JBL Bar9.1 TWS ver 22.01.31.80.zip- Fixed a grouping issue with other Chromecast built-in speakers (read below):
- 3rd party Chromecast built-in speakers using a Google SDK less than 1.52GM2 can not be grouped with 1st party Google speakers any longer. This update brings the Bar 9.1 up to 1.52GM2, which means once again, it can be grouped with 1st party Google speakers
- Software update resolves the issues with the "Google Home" app if you are using an Android phone (read below):
- Speakers with an SDK less than 1.52GM2 set up with a Google Pixel phone need to use a new, additional app called the "Device Utility app" to complete the Wi-Fi setup. After this update, customers may use the Google Home app as normal for Wi-Fi setup
- General software and performance improvements:
- Sometimes there was a 0.5sec audio drop during ARC streaming with PCM format, now improved!
- Import MTK patch to solve continuous distortion after connecting Apple TV to a Sony TV while playing PCM stream in eARC source.
Note: This software upgrade is not applicable for JBL Bar 9.1 China version.
注意：此软件升级不适用于JBL Bar 9.1中国版。
------------------------------------------------------------------------
Version: V21.23.11.80
Release Date: June 8th, 2021
Release Media: OTA (over the air) Automatic Upgrade and/or USB
Filename: JBL Bar9.1 TWS ver 21.23.11.80.zip
1. Improve calibration success rate in some cases.
2. Improve compatibility of some “ATMOS” Netflix streaming content.
3. Improve LED Display messages.
Note: This software upgrade is not applicable for JBL Bar 9.1 China version.
注意：此软件升级不适用于JBL Bar 9.1中国版。
------------------------------------------------------------------------
Version: V21.13.11.80
Release Date: April 8, 2021
Release Media: OTA (over the air) Automatic Upgrade and/or USB
Filename: JBL Bar9.1 TWS ver 21.13.11.80.zip- Improves Soundbar Optical, HDMI, and ARC Compatibility with TV.
- Improves Bluetooth connectivity for mobile devices.
- Improved LED Display Messages.
- Bug fix to remove detachable speakers battery level checking due to imprecise readings.
注意：此软件升级不适用于JBL Bar 9.1中国版。
Was this helpful? Thank you for your feedback! - Fixed a grouping issue with other Chromecast built-in speakers (read below):
-
BAR 800 & BAR 1000
Software Update Release Notes
------------------------------------------------------------------------
Version: V 22.34.55.80.00
Release Date: September 09, 2022
Release Media: OTA (over the air) Automatic Upgrade and/or USB
Filename: JBL_Bar_800_1000_ver_22.34.55.80.00.zip
What’s New- Improved the LED display behavior for a better user experience.
- Optimized the charging experience for the detachable surround speaker.
- Improve Wi-Fi music streaming connectivity.
Instructions for software upgrade
Via USB upgrade:
- Download the latest software version from JBL.com with the below 3 files;
- checksum.txt
- update.zip
- update.zip.sign
- Prepare one empty USB Stick and copy the 3 files in the root directory;
- Please insert the USB Stick into the Soundbar USB port and press: [SOURCE] and [VOL+] button on the Soundbar to start the software upgrade. Wait for the software upgrade to complete. Once completed, the Soundbar will restart;
- To check the software version, press and hold the [SOURCE] and [VOL-] button on the Soundbar for 10 seconds.
Via auto update over Wi-Fi:- Connect Wi-Fi to your soundbar using the JBL One app.
- Once the the soundbar is in standby mode, the software will automatically update.
Was this helpful? Thank you for your feedback! -
BAR 5.1 SURROUND
Software Update Release Notes
------------------------------------------------------------------------
Version: 20-43-51-00
Release Date: December 18, 2020- Improves Soundbar HDMI ARC compatibility with TV
Was this helpful? Thank you for your feedback! -
BAR 5.1 SURROUND
Software Update Release Notes
------------------------------------------------------------------------
Version: 20-43-51-00
Release Date: December 18, 2020- Improves Soundbar HDMI ARC inter-operability
- Enables Alexa MRM (Multi-Room Music) functionality.
- Download the “JBL BAR Setup” App onto your Android or iOS smartphone/tablet to setup WiFi and link it to your Alexa account to enjoy this new feature.
IOS App version: 1.0.8813
Android App version: 1.0.8924Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00