How To
How To
-
While the Partybox Encore does not have a Microphone Input, it does have an internal receiver for the wireless microphone that comes with the product.
It is possible to pair one of the microphones from the Partybox Wireless Mic * (sold separately from the Partybox Encore, containing 2 x Wireless Microphones and 1 x Receiver/Dongle for connection with 6.3 mm microphone jack inputs) - however, a maximum of 2 wireless microphones can be connected to the receiver at a time.
As an alternative, a spare part accessory is available (dependent on stock levels), which includes just 1 x Microphone for Partybox Encore - search for the aforementioned product name or "FG7261JMJ100114" in our online store.
To connect an additional Wireless Microphone to the Partybox Encore, follow these steps:
Switch off the Partybox & both microphones.
Once off, switch on both microphones only, then switch on the Partybox and both microphones should connect to the receiver.
If not, please try the same instructions as above expect with a Factory Reset (Press and hold the "Play" and "Light" buttons for > 10 seconds) instead of the restart above, then follow the microphone pairing procedure:
1. Turn off the speaker.
2. Make sure that the distance between the new wireless microphone and speaker is within 1 meter. Turn on the microphone.
3. Turn on the speaker. The microphone will pair and connect with the speaker automatically within 3 minutes.
*Please note that regarding the older version of the JBL Partybox Wireless Mic - the JBL Wireless Microphone Set - the microphones are not compatible with the Partybox Encore whatsoever, as they use UHF instead of 2.4 GHz for communication between the microphones and receiver (and the Partybox Encore does not have a Microphone Input).
Was this helpful? Thank you for your feedback! -
Yes, both of them are rated IPX7, which means they can be submerged in clear water for up to 30 minutes at up to 1 meter of depth. Make sure the charging cover is closed, or water will get into the product and damage it.Was this helpful? Thank you for your feedback!
-
No. The ear pads are made from a synthetic protein leather.Was this helpful? Thank you for your feedback!
-
Yes, you can control the amount of outside noise to let in with our Ambient Aware options offered exclusively through the JBL app.Was this helpful? Thank you for your feedback!
-
The ear pads on the three second-generation Everest headphones are fixed to a plastic plate, held in place on the ear pods with small claws. It is not very easy to remove it, and sometimes one or more of the claws may break off. This means that it is usually best to have a service technician do the replacement, but if you have new pads at hand, and is handy with tools, you may do it yourself.Was this helpful? Thank you for your feedback!
-
No. The Everest 150NC do not feature an IPX rating and are not designed to be overexposed to moisture. Overexposure can compromise the controls and sound.Was this helpful? Thank you for your feedback!
-
No. The Everest 110 are not sweat proof and do not have an IPX rating that protects the headphones from sweat and water. Over exposure to sweat and water can cause significant damage to the headphones.Was this helpful? Thank you for your feedback!
-
The product is Water Resistant and Sweat Resistant, but you cannot swim with these headphones.Was this helpful? Thank you for your feedback!
-
Yes, the cords on the new N40 are detachable. You can remove the cords from the top of the stainless steel earbud housing. Please make sure that you attach the left cord to the left ear plug and the right cord to the right earbud. You will see a red dot indicator for Right and and blue dot indicator for Left on the cable. There are two detachable cables provided. One detachable straight cable and one detachable 3 button microphone cable.Was this helpful? Thank you for your feedback!
-
No. Although the Control X Wireless have a rugged exterior and are portable, they are not all-weather speakers. Any direct exposure to harsh weather condition (rain, snow, extreme hot/cold temperatures) will damage the speakers.Was this helpful? Thank you for your feedback!
-
No, return shipping is on us. You can send your InfinityLab order back within 30 days for a full refund.
We will even refund you the 5 euro shipping fee that we charge for delivery of InfinityLab orders with an order value of less than 25 euro, if however you return your full InfinityLab order.
To initiate a return request, go to "Return Products" under "Order Support" in the menu bar.
Was this helpful? Thank you for your feedback! -
No, rack ears are not available for the No. 536 mono amplifiers.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00