How To
How To
1676 results
-
The soundbar will auto switch the source between HDMI eARC and optical. HDMI eARC is higher priority than optical source. It is not possible to manually switch from HDMI to optical.Was this helpful? Thank you for your feedback!
-
The optical input supports these formats: 2-ch PCM with 44.1k or 48k support, and Dolby Digital (1.0 to 5.1 channels).Was this helpful? Thank you for your feedback!
-
ONYX and AURA supports PCM, WMA, AAC, FLAC and MP3 via DLNA.Was this helpful? Thank you for your feedback!
-
FOD (foreign object detection) is a security guarantee that must be included in Qi certification.
This means our Infinity Lab Qi-certified power bank can detect if a foreign object, such as metal, is on its surface.
If that happens, the wireless charger either stops charging or does not start charging at all.Was this helpful? Thank you for your feedback! -
The JBL Headphones app provide the following functions:
Equalizer setting
Auto on/off
Microphone gain settings
Battery life status
Noise suppression level
LED brightness setting
Was this helpful? Thank you for your feedback! -
You can adjust equalizer, RGB LED effects, calibrate Quantum ONE headtracking, change microphone settings and update the headset's firmware.Was this helpful? Thank you for your feedback!
-
All of the surround mode functions in our devices work in different ways, and some might be useful in certain situations. Here is a list of each mode, explained with more details. HVS surround mode: Is the abbreviation for HARMAN Virtual Surround. It will process the signal to simulate a surround effect from a stereo source. DSP Bypass: Surround Off (DSP or Analog Bypass) = 2 CH STEREO. When this mode is selected, the BDS will pass the analog source material directly through to the front left and right speakers, bypassing the digital processing circuitry. Stereo mode: Turns off all surround processing and plays a pure two-channel signal or a downmix of a multichannel signal. The signal is digitized and bass management settings are applied, making it appropriate when a subwoofer is used. Pulse-code modulation (PCM): This method is used to digitally represent sampled analog signals, and two channels (stereo) is the most common format. PCM Stereo is what standard Audio CDs always use. Dynamic Range Control: This setting makes the loud and quiet parts of a movie or music sound closer to the same volume (a process known as compression). Compression lets you turn up the volume so you can hear the quiet parts without the loud parts disturbing other people. NOTE: This feature works only with Dolby Digital programs that have been specially encoded. Three settings are available: •• Off: Never applies compression. Use this setting when the volume may be as loud as you desire. •• On: Always applies compression. Use this setting when you want the volume to be as quiet as possible without making it difficult to hear spoken dialogue. •• Auto: Applies compression based on information encoded within the Dolby Digital bit-stream. The receiver will selectively apply compression only during the most dynamic parts of the soundtrack.Was this helpful? Thank you for your feedback!
-
Power button, no light: Product is OFF. Power button, constant light: Product is ON. Power button: constant white, when no Bluetooth device connected. Power button, flashing blue in Bluetooth pairing mode. Power button, constant blue light: Bluetooth connected. Battery indicator LEDs: Five LEDs show battery level. When charging, the blinking LED shows how far charging has progressed. When fully charged, the LED lights will turn off. JBL Connect button flashes white in connection mode. When connected: constant light.Was this helpful? Thank you for your feedback!
-
Power button, no light: Product is OFF. Power button, constant light: Product is ON. Power button: constant white, when no Bluetooth device connected. Power button, flashing blue in Bluetooth pairing mode. Power button, constant blue light: Bluetooth connected. Battery indicator LEDs: Five LEDs show battery level. When charging, the blinking LED shows how far charging has progressed. When fully charged, the LED lights will turn off. JBL Connect button flashes white in connection mode. When connected: constant light.Was this helpful? Thank you for your feedback!
-
Here is a list of what the LED lights mean. Light OFF: Power OFF, no charger connected, OR charger connected, fully charged. RED light ON: Power OFF, charger connected and charging. BLUE light flashing: Power ON, no Bluetooth connected. Constant BLUE light: Power ON, connected to Bluetooth device. RED/BLUE light flashing: Power ON, in pairing mode. RED light flashing: Power ON, low battery.Was this helpful? Thank you for your feedback!
-
(+) Button A short press will increase the volume. A long press will skip to the next track. (-) Button A short press will decrease the volume. A long press will skip back a track. Middle (Multifunction Button) A short press will play/pause music or answer/end calls. A long press on the middle button will turn the device on/off.Was this helpful? Thank you for your feedback!
-
The battery LED's show how much the battery is charged on your LINK 10 or LINK 20 speaker.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00