How To
How To
-
The Wi-Fi indicator shows the signal strength between your speaker and Wi-Fi router. 3 bars = perfect signal 2 bars = good signal 1 bar = low/poor signal (which might cause dropouts or other issues)Was this helpful? Thank you for your feedback!
-
The sound feedback is the tone you hear when you send a command to the soundbar. This confirmation tone can be switched off, if you do not want it to be heard.Was this helpful? Thank you for your feedback!
-
The calibration sound setup process ensures the soundbar delivers the best 3D surround effects for any interior and room layout.
Was this helpful? Thank you for your feedback! -
The calibration sound setup process ensures the soundbar delivers the best 3D surround effects for any interior and room layout.Was this helpful? Thank you for your feedback!
-
It is a personalization feature that allows you to customize your favorite music track, auto-off timing, and music volume.
Once set up, you can directly access it through the remote control or within the JBL ONE App.Was this helpful? Thank you for your feedback! -
There is a constant red light in the LED while charging takes place. When charging is complete, the diode goes dark.Was this helpful? Thank you for your feedback!
-
During charging, the LED lights red constantly. When it is fully charged, the LED goes out. No light.Was this helpful? Thank you for your feedback!
-
Sometimes, when the soundbar is connected to a digital TV, the audio may not synchronize with the video. If the video is behind the audio, adjust the audio delay time to match the video.
You can set the audio delay time between 0 msec and 250 msec.
Note: The audio delay time you specify may not be exact, depending on the played content.
The audio sync function will not resolve instances where the video is ahead of the audio.
Was this helpful? Thank you for your feedback! -
Sometimes, when the soundbar is connected to a digital TV, the audio may not synchronize with the video. If the video is behind the audio, adjust the audio delay time to match the video.
You can set the audio delay time between 0 msec and 250 msec.
Note: The audio delay time you specify may not be exact, depending on the played content.
The audio sync function will not resolve instances where the video is ahead of the audio.Was this helpful? Thank you for your feedback! -
Audio feedback turns on tones that let you know that something is happening on the product. When Audio feedback is ON, you will hear tones for: 1: Bluetooth Pairing. 2: SoundShift on/off. 3: JBL Connect Pairing Mode (Boost TV only)Was this helpful? Thank you for your feedback!
-
The product + indicates splashproof.Was this helpful? Thank you for your feedback!
-
The woven part of the cable is tangle-free, meaning that in daily use, you can put the headphone in your pocket, without having to untangle a cable knot afterwards. Note that the left and right section is smooth, not tangle-free. This is because woven cord would tend to make noise when rubbing against clothes.Was this helpful? Thank you for your feedback!
-
With HARMAN Volume you can set your desired volume between low, medium and high. You can listen to your audio without sudden distracting changes such as blasts from ads, and volume variations as you switch between channels on your TV. Other benefits include full sound effects even at low volumes, this means if you are watching movies (DVD, BlueRay disc) and HARMAN volume is set to low volume, then the signal is more compressed, than what the other volume levels is. This will allow you to hear natural, consistent sound at low volume level, and not only hearing voice conversation from movies, giving you the same movie experience just with lower volume. What is best for you is a matter of personal preference, so we recommend playing around with the three different levels.Was this helpful? Thank you for your feedback!
-
HVS is short for Harman Virtual Surround. This signal processing system can simulate surround effect from a stereo source.Was this helpful? Thank you for your feedback!
-
Because the headphone features a lightning connector, it is compatible with IOS devices only.Was this helpful? Thank you for your feedback!
-
Any device that has Bluetooth capabilities and supports A2DP stereo audio streaming will be compatible with the Under Armour Sport Wireless headphonesWas this helpful? Thank you for your feedback!
-
The ML No. 526 uses the ESS SABRE ES9018K2M chip.Was this helpful? Thank you for your feedback!
-
The JBL Tour One M3 supports SBC, AAC and LDAC 24bit/192kHz when connected to a device that has support for these codec.
Was this helpful? Thank you for your feedback! -
It supports 3 CEC commands; System Standby, OneTouch Play and Audio Return Channel.Was this helpful? Thank you for your feedback!
-
You can adjust equalizer, RGB LED effects, change microphone settings and update the headset's firmware.Was this helpful? Thank you for your feedback!
-
The JBL Tour Pro 2 allows you to find your preferred control method in any scenario. When you want to control your headphones, you no longer need to take your phone out, open the JBL Headphones app and wait for the headphones to connect in the app. All features are accessible directly on the Smart Case, where you can easily select any key feature, you know from the app.
Some of the features you can access on the Smart Case includes playing and pausing your music, skip to the next/previous track, volume adjustment, answer/reject calls, customize the EQ settings, Spatial audio, ANC and Ambient Sound Control, timer & clock, receive notifications, screensavers, and a battery indicator.
Was this helpful? Thank you for your feedback! -
It is possible to rename the Bluetooth name of the primary connected device and set the Party or Stereo mode. If a firmware upgrade is available for any Connect, Connect+, or Partyboost compatible speaker, this can be installed through the JBL Portable app. Only identical products can be set to stereo mode. Please note that, even though you can pair a Boost TV with JBL Connect, you cannot control this from the JBL Connect AppWas this helpful? Thank you for your feedback!
-
There are tons of features that you can use with your Harman Kardon Allure spaeker and Alexa app. We advise going to Amazon's own webpage for more assistance with the Alexa app and what you can do with it. https://www.amazon.com/gp/help/customer/display.html?nodeId=201602230Was this helpful? Thank you for your feedback!
-
You can tap on "Reset PIN Code" 5 times to reset the PIN Code.
Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00