How To

Support Overview / How To

How To

1674 results
  • What does the + indicate?
    The product + indicates splashproof.
  • What does tangle-free cable mean?
    The woven part of the cable is tangle-free, meaning that in daily use, you can put the headphone in your pocket, without having to untangle a cable knot afterwards. Note that the left and right section is smooth, not tangle-free. This is because woven cord would tend to make noise when rubbing against clothes.
  • What does HARMAN volume do?
    With HARMAN Volume you can set your desired volume between low, medium and high. You can listen to your audio without sudden distracting changes such as blasts from ads, and volume variations as you switch between channels on your TV. Other benefits include full sound effects even at low volumes, this means if you are watching movies (DVD, BlueRay disc) and HARMAN volume is set to low volume, then the signal is more compressed, than what the other volume levels is. This will allow you to hear natural, consistent sound at low volume level, and not only hearing voice conversation from movies, giving you the same movie experience just with lower volume. What is best for you is a matter of personal preference, so we recommend playing around with the three different levels.
  • What does "HVS" mean? I can see it as an option for surround modes.
    HVS is short for Harman Virtual Surround. This signal processing system can simulate surround effect from a stereo source.
  • What devices are compatible with the N20LT headphones?
    Because the headphone features a lightning connector, it is compatible with IOS devices only.
  • What Devices are Compatible with my UA Sport Wireless Headphones?
    Any device that has Bluetooth capabilities and supports A2DP stereo audio streaming will be compatible with the Under Armour Sport Wireless headphones
  • What Dac Chip is used in the Mark Levinson No. 526?
    The ML No. 526 uses the ESS SABRE ES9018K2M chip.
  • What codecs does JBL Tour One M3 support?

    The JBL Tour One M3 supports SBC, AAC and LDAC 24bit/192kHz when connected to a device that has support for these codec.

  • What CEC commands do the SB450 support?
    It supports 3 CEC commands; System Standby, OneTouch Play and Audio Return Channel.
  • What can you do with JBL QuantumENGINE software?
    You can adjust equalizer, RGB LED effects, change microphone settings and update the headset's firmware.
  • What can I do with the JBL Tour Pro 2 Smart Case?

    The JBL Tour Pro 2 allows you to find your preferred control method in any scenario. When you want to control your headphones, you no longer need to take your phone out, open the JBL Headphones app and wait for the headphones to connect in the app. All features are accessible directly on the Smart Case, where you can easily select any key feature, you know from the app.

    Some of the features you can access on the Smart Case includes playing and pausing your music, skip to the next/previous track, volume adjustment, answer/reject calls, customize the EQ settings, Spatial audio, ANC and Ambient Sound Control, timer & clock, receive notifications, screensavers, and a battery indicator. 

  • What can I do with the Connect app?
    It is possible to rename the Bluetooth name of the primary connected device and set the Party or Stereo mode. If a firmware upgrade is available for any Connect, Connect+, or Partyboost compatible speaker, this can be installed through the JBL Portable app. Only identical products can be set to stereo mode. Please note that, even though you can pair a Boost TV with JBL Connect, you cannot control this from the JBL Connect App
  • What can I do with the Amazon Alexa app for my Harman Kardon Allure/portable speaker?
    There are tons of features that you can use with your Harman Kardon Allure spaeker and Alexa app. We advise going to Amazon's own webpage for more assistance with the Alexa app and what you can do with it. https://www.amazon.com/gp/help/customer/display.html?nodeId=201602230
  • What can I do if I forgot the PIN Code in JBL Safe Sound?

    You can tap on "Reset PIN Code" 5 times to reset the PIN Code.

  • What audio codecs are supported for LINK 10, 20, 300 and 500?
    Codecs such as MP3, AAC-LC, HE+ACC, FLAC, Vorbis, Wav, CELT/opus are supported via Wi-Fi streaming. For Bluetooth, codecs such as SBC and AAC are supported.
  • What audio codec does the JBL Dive Support?
    The Endurance Dive supports SBC. But the main signal transfer is A2DP, v1.3.
  • What are the two signal cables that are in the SOHO II NC box meant for? One has silver-colored plug, the other one has black-colored plug.
    The silver cable is intended for use with Apple sources. The black cable is intended for use with Android/universal sources.
  • What are the two openings at the back of the Soundgear used for?
    These are bass tuning canals, used to provide full sound.
  • What are the sound modes on the JBL Bar Studio, Bar 2.1, Bar 3.1, and Bar 5.1?
    There are 5 sound modes: - Standard - Movie - Music - Voice - Sports Out the box, "Standard" sound mode is the default setting. The display on the soundbar's front panel will show which mode you are in (excluding the Bar Studio) Dotted LED lights on the side of the JBL Studio indicates when sound more your are in, the patterns are as follows: - Standard: One LED dot - Movie: Two LED dots - Music: Three LED dots - Voice: Four LED dots - Sports: Five LED dots
  • What are the requirements for using Harman Kardon Allure speaker?
    There are a couple of things that you will need to install your Harman Kardon Allure speaker. 1. Amazon account (US, UK or Germany are the only ones supported now). 2. An Android device (Android 6.x and up) or Apple device (iOS 9.3 and up). 3. A Wi-Fi network with UPnP enabled. 4. Our HK Alexa setup app from the App store. If you have met all the criteria for installing your new Harman Kardon Allure speaker, then you are ready to enjoy a voice-activated speaker and great music!
  • What are the leather-like patches in the HKTS 335 or 635 meant for?
    They are meant as protective pads for the satellite speakers to stand on, preventing damage and scratches.
  • What are the key differences between the Bar 2.1 and 3.1?
    The JBL Bar 2.1 has a 6.5" subwoofer, whereas the Bar 3.1 has a 10" subwoofer. The Bar 3.1 has two additional HDMI inputs, support 4K, and has a dedicated tweeter and two woofers to function as the center channel. These added features makes the JBL Bar 3.1 more efficient at producing bass, connecting multiple sources, playing Ultra HD content, and listening to voice/vocals.
  • What are the improvements from the previous generation of Citation Bar?
    Compared to the Citation Bar, the Citation Multibeam 1100 adds Dolby Atmos with up-firing drivers, Multibeam surround sound, Sound Calibration and PureVoice dialogue enhancement. 
     
  • What are the holes at each end of the Boost used for?
    These are the bass ports. Please do not place the Boost TV with its ends too close to obstacles, since that will reduce bass output. Allow at least 5-10cm free space at each end.
< 1 ... 10 11 12 13 14 ... 70 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +44 161 222 3325

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00

message

WhatsApp Us

Send us a message on +44 161 222 3325 or click  here 

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00