How To
How To
-
Since the No. 40 uses a card cage design, all of the No. 40 boards plug into a backplane. Since the No. 40s Video Processors backplane was designed before HDMI existed it cannot accommodate HDMI video, so the HDMI video signal is passed straight through from one of the three HDMI inputs on the HDMI card to the system’s display device via the HDMI output. Plugging the No. 40 HDMI card into the Audio Processor allows us to capture the HDMI audio signal and process it.Was this helpful? Thank you for your feedback!
-
We do not publish a frequency response for these models because this is dependent on room acoustics and their internal DSP settings.Was this helpful? Thank you for your feedback!
-
This can be caused by the “input switch” on the unit’s rear panel not being fully engaged in the proper position; make sure that the “input switch” is fully engaged in the proper position (RCA or XLR). Also, make sure that only one input connector is used at a time, i.e., only the RCA or the XLR. They should not be used simultaneously. Explanation: The “input switch” is actually a ground switch, not an input selection switch. By using the switch only to change the ground connection, the signal connections never have to pass through a set of switch contacts. This allows for superior audio performance and enhanced long-term reliability.Was this helpful? Thank you for your feedback!
-
If the preset DAB/FM station signal is not strong enough the alarm will go off in buzzer mode instead. Make sure the signal is strong enough, by checking that the station plays without static or distortion (FM).Was this helpful? Thank you for your feedback!
-
We believe the baseline performance of the QuantumSPHERE technology is cutting edge in terms of localization. The calibration feature improves upon this performance by calibrating the system to your individual anatomy.Was this helpful? Thank you for your feedback!
-
There is a setting in the JBL One app called Bluetooth reconnection. You can change the behavior to enable it to automatically reconnect every time the speaker is turned on, if this is the behavior you want.
Was this helpful? Thank you for your feedback! -
The speaker has an auto calibration feature, which measures the space around the speaker and adjusts the sound quality based on the room around it. Auto calibration will automatically work when you power on the speaker and begin playing music. For the best sound, we recommend placing the speaker in the middle of the room, at least 0.5 meters away from any walls.
Was this helpful? Thank you for your feedback! -
When not connected to AC power, the speaker will be automatically switch off after 1 hour of inactivity to save battery consumption. You can adjust the auto standby time on JBL One app.
Was this helpful? Thank you for your feedback! -
Due to compatibility issue, clear the Harman Kardon One app cache and try to update it again.
Was this helpful? Thank you for your feedback! -
You need to charge your Onyx Studio 9 using the power cord included in the package. It takes about 4 hours to fully charge.
Was this helpful? Thank you for your feedback! -
This is by design to achieve maximum battery play time. To get Maximum loudness connect the unit to AC power during usage.
Was this helpful? Thank you for your feedback! -
The remote is only capable of operating one device at a time (unless you have programmed advanced functions such as Volume, Channel or Transport control Punch-Through). When you press the Source Selector to operate your other product, such as the DVD player, the remote cannot control any other product, including the AVR, until you press the AVR Button again. To avoid your problem in the future, always press the AVR Button or appropriate Source Selector before you enter any command.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00