How To
How To
1640 results
-
To take a phone call, press the center button of the RIGHT ear for 1 second. To hang up a call, press and hold the center button on the RIGHT ear for 1 second. To ignore a call, press and hold center button for 3 seconds until music resumes.Was this helpful? Thank you for your feedback!
-
To charge the UA Flash, place inside charging case. While charging, both LEFT and RIGHT ear bud will display a sold red light. Once the headphones are fully charged. The red light will turn OFF. When the charging case is fully charged, the white LED's will light up accordingly: 0= 0% Dead 2-3 = 40%-50% 4=100% Full battery lifeWas this helpful? Thank you for your feedback!
-
To pause/play music, press center button on RIGHT ear for 1 second. To skip tracks forward, DOUBLE CLICK the center button on RIGHT ear. Unfortunately, you cannot skip tracks backward.Was this helpful? Thank you for your feedback!
-
To connect to a new device, begin with the headphones powered off and hold the center button on the RIGHT headphone for 5 seconds to enter pairing mode. You will hear the BT pairing audible chime as it searches for a different device. Make sure the device you are wanting to connect to is in range and BT is on. Once connected you will hear the audible Connected chime. Once Right ear is connected, press and hold the center button on LEFT ear for 3 seconds as it powers on and connects to the device followed by the same Connected audible chime.Was this helpful? Thank you for your feedback!
-
To turn off the UA Flash, you may place headphones in case to automatically power off or press and hold the center of the UA logo on the RIGHT ear for 3-5 seconds until you hear the power down chime. Both RIGHT and LEFT ear will display a solid red light before turning completely off. Please note: Powering off the RIGHT ear, will also power off the LEFT ear as well.Was this helpful? Thank you for your feedback!
-
To power on and pair the UA Flash, remove the ear tips from the charging case. If this is your first time using the headphones, they will automatically go into pairing mode. You will see the blue and red LED light flash on the RIGHT ear as it attempts to pair with your device. Make sure your device is in range and BT settings are ON. The JBL True Wireless Flash should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a slow blinking blue light below the UA logo on the RIGHT Ear. The RIGHT ear must be connected first in order to power on and connect the LEFT ear. To connect the LEFT ear, simply press and hold on the UA logo for 3-5 seconds until you hear the audible power on chime. (The left should automatically power on when you remove it from the case) Once powered on, it should connect to your device within a few seconds displaying a slow blinking blue LED light below the UA logo.Was this helpful? Thank you for your feedback!
-
To reset, Long press the (Right) button for 2s when the earbuds in the case, the blue LED will flash once to indicate reset is done.Was this helpful? Thank you for your feedback!
-
To activate Voice Assistant, press and hold the LEFT ear for 5 seconds until music stops and voice assistance asks what they can help you withWas this helpful? Thank you for your feedback!
-
AmbientAware Technology allows you to hear your surroundings without removing your UA Pivot headphones. To activate AmbientAware mode, double press the Bionic Hearing button on the controller. You will hear a tone, and your music level will lower when AmbientAware Technology is engaged. To revert back to normal volume, simply double press the Bionic Hearing button again.Was this helpful? Thank you for your feedback!
-
The UA Pivot headphones do not support AptX™ and AptX HD™ audio codecs.Was this helpful? Thank you for your feedback!
-
To receive a call, press the power/pairing button on the controller for 1 second.Was this helpful? Thank you for your feedback!
-
As the headphones are charging, you will see a red solid light indicator on the controller. Once the unit is fully charged, the red light will turn off.Was this helpful? Thank you for your feedback!
-
The UA Pivot headphones comes with 3 different ear tips and enhancers to ensure the best fit!Was this helpful? Thank you for your feedback!
-
From a full charge, you can expect up to 9 hours of playback time.Was this helpful? Thank you for your feedback!
-
Locate the power button on the controller. Hold the power button up for 2-3 seconds and release. Once turned on, it will display a solid blue light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue and red light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.Was this helpful? Thank you for your feedback!
-
TalkThru Technology allows you to clearly hear others for quick conversations without removing your UA Pivot headphones. To activate TalkThru mode, press the Bionic Hearing button on the controller once. You will hear a tone, and your music level will lower when TalkThru Technology is engaged. To revert back to normal volume, simply press the Bionic Hearing button again.Was this helpful? Thank you for your feedback!
-
To skip tracks forward, press and hold the volume + for 2 seconds. To skip tracks backward, press and hold the volume - for 2 seconds. To pause/play the track, press the center button for 2 seconds.Was this helpful? Thank you for your feedback!
-
You will be able to control the volume by pressing the volume + and volume- buttons located on the controller.Was this helpful? Thank you for your feedback!
-
Yes. The UA React features an IPX7 rating which offers full protection from sweat and water. They can be fully submerged for up to 30 minutes.Was this helpful? Thank you for your feedback!
-
AmbientAware Technology allows you to hear your surroundings without removing your UA React headphones. To activate AmbientAware mode, double press the Bionic Hearing button on the controller. You will hear a tone, and your music level will lower when AmbientAware Technology is engaged. To revert back to normal volume, simply double press the Bionic Hearing button again.Was this helpful? Thank you for your feedback!
-
The UA React headphones do not support AptX™ and AptX HD™ audio codecs.Was this helpful? Thank you for your feedback!
-
To receive a call, press the power/pairing button on the controller for 1 second.Was this helpful? Thank you for your feedback!
-
As the headphones are charging, you will see a red solid light indicator on the controller. Once the unit is fully charged, the red light will turn off.Was this helpful? Thank you for your feedback!
-
The UA React headphones comes with 3 different ear tips and enhancers to ensure the best fit!Was this helpful? Thank you for your feedback!
-
Locate the power button on the controller. Hold the power button up for 2-3 seconds and release. Once turned on, it will display a solid blue light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue and red light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.Was this helpful? Thank you for your feedback!
-
TalkThru Technology allows you to clearly hear others for quick conversations without removing your UA React headphones. To activate TalkThru mode, press the Bionic Hearing button on the controller once. You will hear a tone, and your music level will lower when TalkThru Technology is engaged. To revert back to normal volume, simply press the Bionic Hearing button again.Was this helpful? Thank you for your feedback!
-
You will be able to control the volume by pressing the volume + and volume- buttons located on the controller.Was this helpful? Thank you for your feedback!
-
Yes. The UA React features an IPX7 rating which offers full protection from sweat and water. They can be fully submerged for up to 30 minutes.Was this helpful? Thank you for your feedback!
-
The headphones feature a Speed Charge battery which allows you to receive a full hour of playback time after only charging the headphones for 5 minutes. To receive the full 12 hours of audio playback, it typically takes 1.5 hours of charging time.Was this helpful? Thank you for your feedback!
-
Press and hold the circle power button for 3-5 seconds. This will be located on the LEFT arm of the neckband. We recommend having one or both ear tips in your ear to listen to the audio commands. Continue to press and hold until you hear the audible voice stating, “powering on.” If this is your first time powering on the headphones it will automatically go into pairing mode in which you will hear the audio voice prompt stating “looking for device”. Make sure that the device you are attempting to connect to is in the Bluetooth search mode and within range. UA | JBL Flex should appear on your device within 3-8 seconds. Once you choose this option on your discoverable devices, it will connect and the voice prompt will state “Connected. “ To power off the headphones, press and hold the circle power button for 2-3 seconds or until you hear the audible voice state, “Powering Off”Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00