How To

Support Overview / How To

How To

1676 results
  • Can I still use my E45BT even if the battery is dead?
    Yes, the E45BT headphones also have an detachable audio cable that you can plug into the headphones. The plug is located at the bottom of the right ear cup.
  • Can I stream Google Chromecast via my PC to Control Xstream?
    Yes, Control Xstream is a Chromecast device that allows you to cast music content via your Chrome browser. However, the JBL Control Xstream is not made for video purposes, because there will be delay between sound and image.
  • Can I stream music via Bluetooth and Wi-Fi from my device simultaneously?
    Yes. The Google cast function works independent to that of Bluetooth, therefore you are able to Bluetooth connect to another device while casting audio to the JBL Playlist simultaneously. This feature is applicable on smartphones, tablets/iPad, and Bluetooth capable computers.
  • Can I stream my CD music to a Harman Kardon Wireless HD Audio System?
    Yes. Just connect the analog output from your CD player to the Audio In jack on the back of your Adapt.
  • Can I swim with these headphones?
    No. These headphones are not waterproof. Swimming with these headphones will cause significant and irreversible damage.
  • Can I switch the display completely off on Pulse 2?
    Yes, although this is not mentioned in the owner's manual, it can be done by pressing and holding the light effect button for more than two seconds.
  • Can I take calls from the Onyx Studio 4?
    Yes, you can take can incoming call from the Onyx 4 by pressing the call button located between the power button and volume + button.
  • Can I take phone calls when the Go + Play BT/Wireless is connected to more than one smartphone?
    No, you can only take phone calls when your Go + Play BT/Wireless is connected to a single smartphone. The speaker is designed in this way to protect privacy when it doesn't know which phone is being called. However, some Android phones (e.g. Google Nexus 5) will still transfer the phone call to speaker even when Go + Play BT/Wireless is connected with multiple smartphones. This is caused by the configuration of the phone.
  • Can I take phone calls with the E25BT headphone?
    Yes, the E25BT features a three button microphone which enables you to pause/play, skip tracks and answer and hang up phone calls.
  • Can I take phone calls with the JBL Duet Mini BT headphone?
    Yes, the JBL Duet Mini features a three button microphone which enables you to pause/play, skip tracks and answer and hang up phone calls.
  • Can I take phones calls with the E45BT headphones?
    Yes, the E45BT headphones allow you to switch seamlessly from your music on your portable device to your phone. The controls are located on the Right ear cup which features your volume control and pause and play which is located in the center of the controls. The center button will allow you to answer and hang up phone calls .
  • Can it charge other portable devices?
    Yes. This product has a usb port for charging other devices.
  • Can it read multichannel discs?
    No, it will only play stereo CD disc.
  • Can I turn off the light on my Harman Kardon Allure speaker?
    Yes. Go into our HK Alexa Setup app, tap on the 3 line icon and click on "Lightning" to toggle it on and off.
  • Can I turn PureVoice on or off?
    PureVoice is default ON when you turn on the soundbar. You may turn OFF PureVoice by using the LCD touch display. On the touchscreen, swipe to the Settings page, then tap Audio -> PureVoice to enable or disable PureVoice.
     
  • Can I turn the Heart Rate sensor off and still use the Under Armour Sport Wireless Heart Rate headphones for audio?
    You can turn the Heart Rate sensor off and still use the headphones for audio by placing your finger on the right earpiece for 3-4 seconds. You will hear an audio prompt stating, “Heart Rate disconnected” which will turn the Heart Rate sensor off. If you wish to turn the sensor back on, simply place your finger on the RIGHT earpiece again for 3-4 seconds until you hear the voice prompt stating that the Heart Rate sensor has been turned back on.
  • Can I update the software on my Aura Studio 2?
    Yes, When an update is available, you will find this on the product website of the Harman Kardon Aura Studio 2, in Manuals and Downloads. You will need to connect your Harman Kardon Aura Studio 2 by USB, and run the software update from a compatible computer.
  • Can I upgrade my AVR 370 through wireless network connection?
    No, upgrade can only be performed with a USB stick. There is no danger to the receiver if you try to upgrade through the wireless network, though.
  • Can I use 2 JBL Boombox speakers in Stereo?
    Yes, from within the JBL Connect App, when you have 2 JBL Boombox speakers connected, set them in Stereo Mode. When you add a 3rd ( or more ) JBL Boombox speakers, they will automatically revert back to Party mode
  • Can I use a 3rd party wall-mounting system?
    Yes, just be aware that you are responsible for correct installation when using 3rd party wall mounts. The included wall-mounting kit in the box fits perfectly and is good for outdoor or indoor use.
  • Can I use AKG N20 NC for telephone conversations?
    Yes, the remote control permits you to pick up and stop a call, and activate the voice assistant to place a call.
  • Can I use Alexa with my Harman Kardon Allure speaker offline?
    No, the Allure speaker requires an internet connection in order to use Alexa voice commands. You can always listen to music via the Bluetooth connection if you are out of range with your Wi-Fi network
  • Can I use an Omni+ speaker and a 1st generation Omni speaker together in a stereo pair?
    No, stereo pairs must be two of the same type of speaker. For example, two Omni 10 or two Omni 10+ speakers will work, but not one Omni 10 and one Omni 10+.
  • Can I use another power supply than the one which is in the box?
    The Adapt can be powered from any USB port providing 1 amp current, but Harman recommends using the supplied power adapter.
  • Can I use any OMNI+ speaker without being connected to a Wi-Fi network?
    Yes, when out of range of your Wi-Fi network, you can use the Bluetooth or analog auxiliary connection. The OMNI 50+ has a built-in battery as well to take the speaker out of the house.
  • Can i use AURA as a TV speaker?
    Yes, simply connect an AUX (phono) cable from TV to your AURA.
  • Can I use Bluetooth for my JBL Playlist speaker?
    Yes, that’s the best part about this speaker, there are so many options. Besides streaming over Wi-Fi, the JBL Playlist also offers a Bluetooth connection and an AUX input
  • Can I use Bluetooth with my Control Xstream
    Yes, that’s the best part about this speaker, there are so many options. Besides streaming over Wi-Fi, the JBL Control Xstream also offers a Bluetooth connection and an AUX input
  • Can I use both Amazon Alexa and the Google Assistant with my JBL LIVE headphones?
    Yes, both voice assistants are supported by the JBL LIVE headphones.
    Amazon Alexa or Google Assistant must be selected as the default voice assistant through the My JBL Headphones app.
    The two voice assistants cannot be used simultaneously. You can always change your default voice assistant through the My JBL Headphones app.
  • Can I use both Windows and Apple computers to update my Everest headphones?
    The EVEREST models 100, 300 and 700 are all updated with the HID (Human Interface Device) tool, available in the download section for each model. This tool works with Windows computers only. The EVEREST ELITE models are updated with a USB tool available on the special Everest web page. This tool is available in both an Apple MAC OS version and a Windows version. This USB tool update is used for the first production run of ELITE models ONLY, and only once! All later production runs, and all updates after this first USB update, will take place wirelessly through the My JBL Headphone app, made for iOS and Android.
  • Can I use Dual Sound and Social mode at the same time on my Aura Studio 2?
    No, When connected from multiple mobile devices ( up to 3 ) to one Harman Dual Sound enabled speaker, only the last one that connected will stay connected when enabling Harman Dual Sound. You can however connect from one mobile device to one of the 2 Harman Dual Sound enabled speakers, and activate Dual Sound afterwards. This will give you the option to interrupt the playback, in the same way as Social Mode works when connected to only one speaker.
  • Can I use Google Chromecast with my first generation Omni speakers?
    No, this is a limitation from Google that requires every speaker to have a special license. First generation OMNI speakers do not have such license.
  • Can I use more than one K915 headset with the wireless transmitter?
    No, each headset must have its own transmitter. However, even if you try to use more than one complete set of 915 in the same room simultaneously, it may not work either. Although the 915 has an automatic scan function that finds available slots in the 2.4 gHz transmission frequency band, interference may still occur.
  • Can I use more than one of the TV input connectors at the same time?
    It is possible to connect both HDMI and optical to the TV input at the same time, but HDMI will be prioritized over optical. Switching manually from HDMI to optical is not possible.
  • Can I use my AKG N20 NC even if the battery is not charged?
    Yes, you can use the headphones, but of course the noise cancelling will not be active.
  • Can I use my E65BTNC as a noise-cancelling headset without music?
    Yes, you do not need to have music playing to keep the noise cancelling switched on. There may be a slight residual hiss from the NC system, which would usually be masked by music, but there will still be a significant reduction of external noise.
  • Can I use my OMNI+ device without the HK Controller App?
    Streaming via Bluetooth or direct aux in connection are supported without the HK Controller app. For OMNI+ devices that you already have placed in a room, they are capable of using either Spotify Connect or Chromecast built-in without the need of using the HK Controller app. Use only the HK Controller app for setting up any OMNI+ devices you may have.
  • Can I use my TUNE600BTnc as noise-reduction headset without music?
    Yes, you can activate the noise reduction circuits alone, with no connection to a source device by Bluetooth or cable. The headphones will stay on as long as there is power in the battery, which is close to 30 hours for pure NC function. Please note that there is a slight residual noise from the NC system, which will be drowned out by music playing, or by surrounding noise such as airplane noise. If you use the NC in surroundings that are near quiet to begin with, you may not get an improvement in noise level.
  • Can I use Noise-Cancelling on my JBL LIVE 650BTNC without music?
    Yes, no problem.
  • Can I use the AKG N60NC Wireless while it is charging?
    Yes, but only with music via cable, and noise reduction will not be active. As soon as you insert the charging cable micro-usb plug, the Bluetooth and NC functionalities will be switched off, and they cannot be reactivated unless you remove the charging cable, and there must of course be a charge in the battery. If you listen to cabled music while charging, be prepared to hear noise under certain conditions. Both computers and switch-mode power supplies can be very noisy, and this noise can sometimes be heard as a whine or buzz. This can only be eliminated by using a power supply that does not create noise.
  • Can I use the AUX or Optical Input on Boost TV to make JBL Connect send TV sound to another JBL Speaker?
    Only Bluetooth pairing can be used for JBL Connect on Boost TV.
  • Can I use the Bluetooth on my Harman Kardon Allure speaker without being connected to Wi-Fi?
    Yes, in case your Wi-Fi does not work then simply press and hold the Bluetooth button for 3 seconds, your speaker is now in pairing mode. The button is located on the back where you connect the power cord. Please be aware that Alexa will not work on Bluetooth.
  • Can I use the Everest Noise Cancelling feature while plugged into a device with my audio cable or flight adapter?
    No. The only way that the Noise Cancellation feature can be activated is while you are using the headphones wirelessly. You cannot use NC while the headphones are plugged into a device or charging.
  • Can I use the Game-Chat balance dial on my headset with all connections?
    The Game-Chat balance dial only works when your headset is powered on. Please note that it supports connection with a USB Type A to C cable and a wireless transmitter dongle, but doesn’t support connection through a 3.5mm cable or Bluetooth for mobile games.
    The Game-Chat balance dial is compatible with PC and Mac, but not with PS4 I 5, Xbox Series X | S, Nintendo Switch or Mobile.
  • Can I use the Game-Chat balance dial on my headset with all connections?
    The Game-Chat balance dial only works when your headset is powered on. Please note that it supports connection with a USB Type A to C cable and a wireless transmitter dongle, but doesn’t support connection through a 3.5mm cable or Bluetooth for mobile games.
  • Can I use the JBL Headphones app and Smart case or Smart Tx at the same time?

    Yes, both the Smart case and the Smart Tx are synched wirelessly to the headphones and can be used simultaneously.

  • Can I use the JBL Quantum 800 in USB mode
    The JBL Quantum 800 can only be used via a 3.5mm, Bluetooth, or 2.4Ghz wireless connection.
  • Can I use the OMNI 10+, 20+ or 50+ speakers for my TV?
    There is a buffer inside the speakers that processes the incoming signal. This buffer delays the audio signal compared to the video signal, causing a delay. For this, we do not recommend using Omni+ speakers with a TV. Our Omni bar will work with your TV sound and you can create wireless 5.1 surround sound system with the Omni bar.
  • Can I use the OR 300 without the Oculus Rift?
    No, the OR 300 headphones are specifically made for the Oculus Rift. These headphones will not work with any other device.
  • Can I use the PartyLight Sticks and PartyLight Beam without a PartyBox speaker or with an older PartyBox speakers?

    You can use the PartyLight Sticks and the PartyLight Beam with older PartyBox speakers. The built-in sound detection algorithm sync the light with the music from the speaker.

    The light also works if you don't own a PartyBox speaker as a built-in mic with a music detection algorithm automatically finds and syncs to any music device that's playing.

  • Can I use the Soundgear with its BTA 20 Bluetooth transmitter with all kinds of sources?
    Yes, all sources that output analog stereo line-level signals or stereo audio optical digital signals may be used, cable-connected to the BTA 20 transmitter. Digital signals must be in PCM format. So if you have a CD player or an FM radio, you can connect the BTA 20 to it, and transmit to your Soundgear (or to other Bluetooth headphones that support the format). Please note that record players need an additional preamplifier to work this way. Of course a TV set can be connected as well, either via optical digital PCM output, via line outputs or via headphone output.
  • Can I use the speaker/soundbar without the App?
    Yes, however, the JBL ONE App gives you another level of control over the speaker/soundbar.
    Through the App, you can personalize the speaker/soundbar's performance, such as:
    • Customizing EQ settings
    • Setting up our new feature called: My Moment 
    • Connect your favorite streaming music services.
  • Can I use the USB charging port, while I'm charging my OMNI 50+?
    Yes, you can easily charge your OMNI 50+ while charging another device via USB port.
  • Can I use the Voice Assistants without internet?

    -       No, your Voice Assistant operates in the cloud and needs to be connected to the internet. .

  • Can I use Zone II for video source on my AVR 171S?
    No, only analog audio sources are available for Zone II.
  • Can I Wear the Earphones in the Rain?
    Although the product is Water Resistant and Sweat Resistant, continuous exposure to water over an extended period of time may damage your earphones.
  • Can I wear these headphones in the rain?
    Although the product is Water Resistant and Sweat Resistant, continuous exposure to water over an extended period of time may damage your earphones.
  • Can I wirelessly link JBL Flip 4 together with JBL Flip 3, Pulse 2 or Xtreme?
    No, JBL Flip 4 can wirelessly link with JBL Connect+ compatible speakers only. Currently, the Flip 4, Pulse 3 and Charge 3 ( after a firmware upgrade ) have the JBL Connect+ feature
  • Can JBL Soundgear be used with a TV or with video games?
    Yes, you can use your Soundgear for TV watching or playing video games. You can use the TV speakers and the Soundgear simultaneously, they will be synchronized in time.
  • Can my headphones be connected to two devices simultaneously?
    Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices. 
< 1 2 3 4 5 6 ... 28 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +44 161 222 3325

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00

message

WhatsApp Us

Send us a message on +44 161 222 3325 or click  here 

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00