How To
How To
1640 results
-
No, each headset must have its own transmitter. However, even if you try to use more than one complete set of 915 in the same room simultaneously, it may not work either. Although the 915 has an automatic scan function that finds available slots in the 2.4 gHz transmission frequency band, interference may still occur.Was this helpful? Thank you for your feedback!
-
It is possible to connect both HDMI and optical to the TV input at the same time, but HDMI will be prioritized over optical. Switching manually from HDMI to optical is not possible.Was this helpful? Thank you for your feedback!
-
Yes, you can use the headphones, but of course the noise cancelling will not be active.Was this helpful? Thank you for your feedback!
-
Yes, you do not need to have music playing to keep the noise cancelling switched on. There may be a slight residual hiss from the NC system, which would usually be masked by music, but there will still be a significant reduction of external noise.Was this helpful? Thank you for your feedback!
-
Streaming via Bluetooth or direct aux in connection are supported without the HK Controller app. For OMNI+ devices that you already have placed in a room, they are capable of using either Spotify Connect or Chromecast built-in without the need of using the HK Controller app. Use only the HK Controller app for setting up any OMNI+ devices you may have.Was this helpful? Thank you for your feedback!
-
Yes, you can activate the noise reduction circuits alone, with no connection to a source device by Bluetooth or cable. The headphones will stay on as long as there is power in the battery, which is close to 30 hours for pure NC function. Please note that there is a slight residual noise from the NC system, which will be drowned out by music playing, or by surrounding noise such as airplane noise. If you use the NC in surroundings that are near quiet to begin with, you may not get an improvement in noise level.Was this helpful? Thank you for your feedback!
-
Yes, no problem.Was this helpful? Thank you for your feedback!
-
Yes, but only with music via cable, and noise reduction will not be active. As soon as you insert the charging cable micro-usb plug, the Bluetooth and NC functionalities will be switched off, and they cannot be reactivated unless you remove the charging cable, and there must of course be a charge in the battery. If you listen to cabled music while charging, be prepared to hear noise under certain conditions. Both computers and switch-mode power supplies can be very noisy, and this noise can sometimes be heard as a whine or buzz. This can only be eliminated by using a power supply that does not create noise.Was this helpful? Thank you for your feedback!
-
Only Bluetooth pairing can be used for JBL Connect on Boost TV.Was this helpful? Thank you for your feedback!
-
Yes, in case your Wi-Fi does not work then simply press and hold the Bluetooth button for 3 seconds, your speaker is now in pairing mode. The button is located on the back where you connect the power cord. Please be aware that Alexa will not work on Bluetooth.Was this helpful? Thank you for your feedback!
-
No. The only way that the Noise Cancellation feature can be activated is while you are using the headphones wirelessly. You cannot use NC while the headphones are plugged into a device or charging.Was this helpful? Thank you for your feedback!
-
The Game-Chat balance dial only works when your headset is powered on. Please note that it supports connection with a USB Type A to C cable and a wireless transmitter dongle, but doesn’t support connection through a 3.5mm cable or Bluetooth for mobile games.
The Game-Chat balance dial is compatible with PC and Mac, but not with PS4 I 5, Xbox Series X | S, Nintendo Switch or Mobile.Was this helpful? Thank you for your feedback! -
The Game-Chat balance dial only works when your headset is powered on. Please note that it supports connection with a USB Type A to C cable and a wireless transmitter dongle, but doesn’t support connection through a 3.5mm cable or Bluetooth for mobile games.Was this helpful? Thank you for your feedback!
-
The JBL Quantum 800 can only be used via a 3.5mm, Bluetooth, or 2.4Ghz wireless connection.Was this helpful? Thank you for your feedback!
-
There is a buffer inside the speakers that processes the incoming signal. This buffer delays the audio signal compared to the video signal, causing a delay. For this, we do not recommend using Omni+ speakers with a TV. Our Omni bar will work with your TV sound and you can create wireless 5.1 surround sound system with the Omni bar.Was this helpful? Thank you for your feedback!
-
No, the OR 300 headphones are specifically made for the Oculus Rift. These headphones will not work with any other device.Was this helpful? Thank you for your feedback!
-
You can use the PartyLight Sticks and the PartyLight Beam with older PartyBox speakers. The built-in sound detection algorithm sync the light with the music from the speaker.
The light also works if you don't own a PartyBox speaker as a built-in mic with a music detection algorithm automatically finds and syncs to any music device that's playing.
Was this helpful? Thank you for your feedback! -
Yes, all sources that output analog stereo line-level signals or stereo audio optical digital signals may be used, cable-connected to the BTA 20 transmitter. Digital signals must be in PCM format. So if you have a CD player or an FM radio, you can connect the BTA 20 to it, and transmit to your Soundgear (or to other Bluetooth headphones that support the format). Please note that record players need an additional preamplifier to work this way. Of course a TV set can be connected as well, either via optical digital PCM output, via line outputs or via headphone output.Was this helpful? Thank you for your feedback!
-
Yes, however, the JBL ONE App gives you another level of control over the speaker/soundbar.
Through the App, you can personalize the speaker/soundbar's performance, such as:- Customizing EQ settings
- Setting up our new feature called: My Moment
- Connect your favorite streaming music services.
Was this helpful? Thank you for your feedback! -
Yes, you can easily charge your OMNI 50+ while charging another device via USB port.Was this helpful? Thank you for your feedback!
-
- No, your Voice Assistant operates in the cloud and needs to be connected to the internet. .
Was this helpful? Thank you for your feedback! -
No, only analog audio sources are available for Zone II.Was this helpful? Thank you for your feedback!
-
Although the product is Water Resistant and Sweat Resistant, continuous exposure to water over an extended period of time may damage your earphones.Was this helpful? Thank you for your feedback!
-
Although the product is Water Resistant and Sweat Resistant, continuous exposure to water over an extended period of time may damage your earphones.Was this helpful? Thank you for your feedback!
-
No, JBL Flip 4 can wirelessly link with JBL Connect+ compatible speakers only. Currently, the Flip 4, Pulse 3 and Charge 3 ( after a firmware upgrade ) have the JBL Connect+ featureWas this helpful? Thank you for your feedback!
-
Yes, you can use your Soundgear for TV watching or playing video games. You can use the TV speakers and the Soundgear simultaneously, they will be synchronized in time.Was this helpful? Thank you for your feedback!
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
No, you cannot use a lightning connector to charge the N90Q. It can only be charged with the micro USB charger that is provided for you in the packaging. Also, no digital signal transmission can take place from an iPhone, only from Android phones. But some Apple computers will work.Was this helpful? Thank you for your feedback!
-
No, this is not possible. The N90Q is completely self-contained. Also, it is not a Bluetooth headphone.Was this helpful? Thank you for your feedback!
-
Yes, you can listen to the N90Q while they are charging at the same time. Please note that the two cables need to be connected at the same time if you are listening to analog sound. When using digital sound input through the USB cable, charging and digital transmission take place simultaneously.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00