How To

In order to skip the tracks on the Y500 headphones, slide and hold Volume Up (to skip forward) or Volume Down (to skip backwards) for 3 seconds. These buttons are located on the LEFT ear cup.

On backup battery power, please wait 50 seconds for the alarm to turn off automatically.

You must first set a radio preset by tuning to a radio station and holding down the 1, 2, or 3 button to save it. After this, the preset will be an option when setting up a new alarm.

When setting up the alarm, the options will be displayed in the following order:
​​​​​​1. Set Alarm Hour.
2. Set Alarm Minute.
3. Set Recurrence - Weekday/Once.
4. Set Ringtone - 4 built-in alarm tones or radio preset 1/2/3 (see information above).
5. Set Light - On/Off.

If the light is set to 'On' when the alarm is set up, once it goes off it will gradually increase in brightness over 10 seconds.

You can easily adjust the volume to your choosing while setting your alarm on the Horizon 2. When setting your alarm, choose the Alarm Bell 1 or the Alarm Bell 2 on the top of the speaker. As you go through your settings when choosing an alarm time, it will give you the option to adjust the volume setting you wish to have on the alarm. Just simply adjust the volume by turning the volume knob on the top of the speaker. After you choose the volume, press the volume knob once to move to the next settings option. 
Please note: the alarm volume will gradually increase until you choose to either snooze or turn the alarm off completely. 

Here are all the possibilities of how you can charge devices from your power bank.

• InstantGo 5,000 with built-in Lightning cable: 1 (1 x integrated cable)
• InstantGo 5,000 with built-in USB-C cable: 2  (1 x integrated cable, and 1 x USB-C output)
• InstantGo 5,000 wireless: 3 (1 x Wireless, 1 x USB-C output and 1 x USB-A output)
• InstantGo 10,000 with built-in Lightning cable: 2 (1 x integrated cable, and 1 x USB-A output)
• InstantGo 10,000 with built-in USB-C cable: 3 (1 x integrated cable, 1 x USB-C output and 1 x USB-A output)
• InstantGo 10,000 wireless: 3 (1 x Wireless, 1 x USB-C output and 1 x USB-A output)

Yes, you may charge your speaker from your desktop or laptop, but the charging time will be longer than using the supplied power adapter.

This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.

The JBL Bar series soundbars supports three CEC commands: - System Standby - One Touch Play - Audio Return Channel.

No, rack ears are not available for the No. 536 mono amplifiers.

No, return shipping is on us. You can send your InfinityLab order back within 30 days for a full refund.

 

We will even refund you the 5 euro shipping fee that we charge for delivery of InfinityLab orders with an order value of less than 25 euro, if however you return your full InfinityLab order.

 

To initiate a return request, go to "Return Products" under "Order Support" in the menu bar.

No. Although the Control X Wireless have a rugged exterior and are portable, they are not all-weather speakers. Any direct exposure to harsh weather condition (rain, snow, extreme hot/cold temperatures) will damage the speakers.

Yes, the cords on the new N40 are detachable. You can remove the cords from the top of the stainless steel earbud housing. Please make sure that you attach the left cord to the left ear plug and the right cord to the right earbud. You will see a red dot indicator for Right and and blue dot indicator for Left on the cable. There are two detachable cables provided. One detachable straight cable and one detachable 3 button microphone cable.

The product is Water Resistant and Sweat Resistant, but you cannot swim with these headphones.

No. The Everest 110 are not sweat proof and do not have an IPX rating that protects the headphones from sweat and water. Over exposure to sweat and water can cause significant damage to the headphones.

No. The Everest 150NC do not feature an IPX rating and are not designed to be overexposed to moisture. Overexposure can compromise the controls and sound.

The ear pads on the three second-generation Everest headphones are fixed to a plastic plate, held in place on the ear pods with small claws. It is not very easy to remove it, and sometimes one or more of the claws may break off. This means that it is usually best to have a service technician do the replacement, but if you have new pads at hand, and is handy with tools, you may do it yourself.

Yes, you can control the amount of outside noise to let in with our Ambient Aware options offered exclusively through the JBL app.

No. The ear pads are made from a synthetic protein leather.

Yes, both of them are rated IPX7, which means they can be submerged in clear water for up to 30 minutes at up to 1 meter of depth. Make sure the charging cover is closed, or water will get into the product and damage it.

While the Partybox Encore does not have a Microphone Input, it does have an internal receiver for the wireless microphone that comes with the product.

 

It is possible to pair one of the microphones from the Partybox Wireless Mic * (sold separately from the Partybox Encore, containing 2 x Wireless Microphones and 1 x Receiver/Dongle for connection with 6.3 mm microphone jack inputs) - however, a maximum of 2 wireless microphones can be connected to the receiver at a time.

 

As an alternative, a spare part accessory is available (dependent on stock levels), which includes just 1 x Microphone for Partybox Encore - search for the aforementioned product name or "FG7261JMJ100114" in our online store.

 

To connect an additional Wireless Microphone to the Partybox Encore, follow these steps:

Switch off the Partybox & both microphones.

Once off, switch on both microphones only, then switch on the Partybox and both microphones should connect to the receiver.

If not, please try the same instructions as above expect with a Factory Reset (Press and hold the "Play" and "Light" buttons for > 10 seconds) instead of the restart above, then follow the microphone pairing procedure:

1. Turn off the speaker.

2. Make sure that the distance between the new wireless microphone and speaker is within 1 meter. Turn on the microphone.

3. Turn on the speaker. The microphone will pair and connect with the speaker automatically within 3 minutes.

 

*Please note that regarding the older version of the JBL Partybox Wireless Mic - the JBL Wireless Microphone Set - the microphones are not compatible with the Partybox Encore whatsoever, as they use UHF instead of 2.4 GHz for communication between the microphones and receiver (and the Partybox Encore does not have a Microphone Input).

If the Harman Kardon Go + Play is not stable or wobbles on a surface, one of the legs on the bottom of the speaker is adjustable with a Philips screwdriver. The adjustable leg is the one with a screw is in the center of the leg. 

Yes. Our Everest series headphones are made with synthetic protein leather which is a non-animal leather.

Yes. Our E series headphones are made with synthetic protein leather.

Yes. Our E series/Duet headphones are made with synthetic protein leather.

No. Our Everest series headphones are made with synthetic protein non-animal leather.

Yes. Enhancers for yurbuds female models are available on JBL.com under yurbuds Accessories and Enhancers. You have small sizes 4 and 5 available for the Inspire 500 for Women yurbuds headphones.

The product packaging is made from FSC-certified material and printed with soy ink. 
 

There are no additional ear tips for the Tune 205BT. These headphones do not feature different size ear tip variations.

Unfortunately if these headphones are overexposed to sweat or water, it may compromise the controls or sound quality.

UA Train features an IPX4 rating which offers protection from a splash of water in any direction for at least 5 minutes. They cannot be fully submerged in water.