How To

Support Overview / How To

How To

1640 results

Sort

Page size

How do I connect my headphones to UA Record?

To set up and enjoy all the features of your UA Sport Wireless Heart Rate, you’ll need to connect it to your phone using the UA Record™ mobile app. Select the UA Sync icon in the upper right hand corner of the dashboard. Tap on “UA Sport Wireless Heart Rate”. Follow the on-screen instructions to finish setup. Once connected, the headphones will live under My Apps and Devices. Here, you can access your headphones' settings to check your battery level, current heart rate, and help.

Was this helpful? Thank you for your feedback!
How do I connect my headphone to Amazon Alexa on my device (iOS and Android)?

- Visit App store and download ‘Amazon Alexa’ App.

Was this helpful? Thank you for your feedback!
How do I connect my JBL LIVE headphones to my device via Bluetooth?

To pair the JBL LIVE headphones the first time, switch the headphone on, look for the blinking blue light indicating pairing mode. Switch on Bluetooth on your source device, find the JBL LIVE headphones in Settings > Bluetooth and confirm pairing. To pair the JBL LIVE headphones from the second time onwards, or to link them with a different device, press and hold the power button until the blue flashing light is visible.

Was this helpful? Thank you for your feedback!
How Do I connect my T450BT via Bluetooth?

In normal use, T450BT pairing mode is automatic. First time it is switched on, it goes into pairing mode at once, shown by the blue LED blinking. After first pairing, if the last used source is not on when the T450BT is switched on, it will wait about 10 seconds with the LED showing white light, then it will switch to pairing mode, with the LED turning blue, and blinking. If you want to start pairing mode manually, make sure that the headphones are switched off, then press and hold the on/off button for more than 5 seconds. The headphones will now switch on in pairing mode, shown by the blue LED blinking.

Was this helpful? Thank you for your feedback!
How do I connect my TV to my boost TV?

First connect your audio/video sources to your TV inputs. Then connect the provided optical or analog audio output from your TV to the Boost TV.

Was this helpful? Thank you for your feedback!
How do I connect my UA BT headphones to a different device?

To pair a different Bluetooth device, make sure that the unit is turned off. You then must press and hold the center button for about 3-5 seconds. You should see the light blink red and blue while it is in pairing mode and the audible voice should state, “looking for device”. You should see UA BT Wireless pop up on the device that you are attempting to pair it with. Choose that option and wait for the audible voice to state, “connected”

Was this helpful? Thank you for your feedback!
How do I connect the inputs and outputs of the Club 5501 car amplifier?

The Club 5501 is a mono amplifier for subwoofer use in cars. It can be confusing to see that it has two inputs, marked left and right, as well as two speaker output pairs. But it is still a mono amplifier, with only one channel. The two inputs are there to make it easier to connect to a normal car radio/head unit, where you will often have two normal full-range connectors, left and right. You can insert both into the 5501. However, if you only have one signal lead going to the 5501, you can use either of the inputs. They are combined into one inside the amplifier anyway. Also, the two sets of speaker connections are there to make it easier to connect two subwoofers simultaneously. The two sets are completely identical, so you can use either one for a single subwoofer, or both. If you connect two, they will be in parallel.

Was this helpful? Thank you for your feedback!
How do I connect the JBL Stadium GTO 20M midrange dome in my car system?

The Stadium GTO 20M is intended for use with the Stadium GTO two-way systems, or to replace existing midrange speakers in systems that are already three-way from the start. The Stadium GTO two-way component systems are 3-way upgradeable. The crossovers are gap-switchable to accommodate a midrange upgrade. The optional Stadium GTO 20M midrange includes a bandpass crossover to convert a two-way system into a threeway system with perfect tonal balance. You simply connect both crossovers to the speaker wires from your car amplifier in parallel, and set the existing GTO two-way crossover to GAP function. Stadium GTO 20M is designed to also fit into many factory three-way applications. Please note that you cannot use this add-on midrange with coaxial car speakers, unless you can access the crossover networks to establish the midrange gap that the extra midrange is meant to occupy.

Was this helpful? Thank you for your feedback!
How do I connect to a different device?

Make sure that the headphones are turned off. Press hold the power button for 3-5 seconds until you hear the audible voice stating “looking for device” You will see the LED lights flash red and blue as it is searching for a new device to connect to. Make sure the device you are trying to connect to is in search mode and it should recognize the device within a few seconds.

Was this helpful? Thank you for your feedback!
How do I connect to a different device?

Press and hold the power button located on the neck band for 3-5 seconds or until you hear the audible voice stating, "powering on.......JBL Everest is ready to pair. Go to the pairing menu on your device" While it is in pairing mode you should see the LED light on the neckband alternate between white and red. The device that you are trying to connect to should recognize the Everest Elite 100 within a few seconds. Once connected, you should see a flashing LED white light on the neckband.

Was this helpful? Thank you for your feedback!
How do I disable Sidetone on JBL Quantum Stream Studio?

Sidetone is by default enabled for the JBL Quantum Stream Studio. You can lower the sidetone volume or mute it by pressing the multifunction knob until you are at the audio/voice balance function. Turn the knob towards the voice (microphone icon) to increase the audio volume and lower down the sidetone volume at the same time. Turn the knob towards the headphone icon to increase the sidetone volume and reduce the audio volume.

Was this helpful? Thank you for your feedback!
How do I disconnect 2 speakers using JBL Connect?

Simply turn off one of the products.

Was this helpful? Thank you for your feedback!
How do I enable Sidetone on JBL Quantum Stream?

Sidetone is off by default.

To enable sidetone on your JBL Quantum Stream microphone, install and start JBL QuantumENGINE, and head to the "Microphone" tab.

Here you can select sidetone level from 0 to 3 (0 = off).

Was this helpful? Thank you for your feedback!
HOW DO I FACTORY RESET MY No5909 HEADPHONES?

1. Power OFF the headphones. 2. Hold power ON/OFF button >4 seconds to enter pairing mode. 3. Simultaneously hold volume + button and power button until LED lights flash red/white.

Was this helpful? Thank you for your feedback!
How do I find the proper fit with my Under Armour Sport Wireless Heart Rate headphones?

First, it is very important that you use the correct size enhancers (rubber tips). This headphone features the TwistLock technology that is uniquely designed to fit in the bowl of the ear (vs. inner ear). They may look bigger than traditional ear buds, but this design provides the most secure fit to ensure they never fall-out in the most active workouts. To properly put them on, first make sure you have the Right and Left ear bud in the correct ear. The number to indicate the enhancer size is featured on the inside of the enhancer next to the large L or R (left ear, right ear). Next, gently insert the enhancer into your ear with a forward motion towards the jaw, which should twist and lock the enhancer into place. After the enhancers are securely locked in the ear, we recommend wrapping the ear loop up and over the ear for the most comfortable fit. Please note, the ear loop should not be pushed backwards to align with arc of the ear perfectly; it is likely there will be negative space between the headphone and your ear. The size 7 will be featured on the model; two smaller sizes (5 & 6) and one larger (8) will be included in the packaging. If you experience discomfort wearing the size 7, try the next size down. If you try a smaller size and the headphones fall out easily or the enhancer does not extend fully to the back of the bowl of the ear, you should try a bigger size. If you’re unable to find a secure fit, one our fit specialists can assist you with a different size or guidance on how to properly wear these headphones. For any questions or concerns regarding fit and sizing, please contact your local JBL Customer Support or please email us from our Support page at https://www.jbl.com/support-contact.html.

Was this helpful? Thank you for your feedback!
How do I fix AirPlay not streaming music to my speaker/soundbar?

If you cannot stream music with AirPlay, use the JBL One App;
(1) Go to Settings.
(2) Select 3rd Party Service.
(3) Select the Airplay tile.
(4) Select Reset AirPlay.

Was this helpful? Thank you for your feedback!
How do I fix occasional audio dropouts when playing music to my Omni+ and Omni?

We recommend starting playback on the Omni+ speaker first, and then linking the 1st generation Omni speakers. Omni+ is more powerful and can provide more stability when restreaming to other speakers.

Was this helpful? Thank you for your feedback!
How do I get a secure fit with the Headphones?

First, it is very important that you use the correct size enhancers (rubber tips). While the tips may appear too large, these do not go all the way into your ear canal. The enhancers are supposed to fill the entire bowl (concha) of your ear, so please be sure to try both sizes to ensure a comfortable fit. To properly put them on, first make sure you have the Right and Left earbud in the correct ear. Next, gently insert the enhancer into your ear with a forward motion towards the jaw, twist and lock into place. If you’re unable to find a secure fit with both sizes in the box, we can send you a complimentary sizing pack with two additional sizes. Please email us from our Support Page at https://www.jbl.com/support-contact.html to request yours today.

Was this helpful? Thank you for your feedback!
How do I get a secure fit with the UA Sport Wireless?

First, it is very important that you use the correct size enhancers (rubber tips). This headphone features the TwistLock technology that is uniquely designed to fit in the bowl of the ear (vs. inner ear). They may look bigger than traditional earbuds, but this design provides the most secure fit to ensure they never fall-out in the most active workouts. To properly put them on, first make sure you have the Right and Left earbud in the correct ear. The number to indicate the enhancer size is featured on the inside of the enhancer next to the large L or R (left ear, right ear). Next, gently insert the enhancer into your ear with a forward motion towards the jaw, which should twist and lock the enhancer into place. These headphones come with 5 sizes of fit enhancers (4, 5, 6, 7 & 8) and 3 sizes of ear tips (small, medium & large). The fit enhancers sit in the bowl of your ear and are essential for a secure fit, while the ear tips are inserted in the inside of the ear canal and provide sound occlusion. The size 7 fit enhancer and large ear tip comes pre-installed on the headphone. If you experience discomfort wearing the size 7, try the next size down. If you try a smaller size and the headphones fall out easily or the enhancer does not extend fully to the back of the bowl of the ear, you should try a bigger size.

Was this helpful? Thank you for your feedback!
How do I get the best audio performance of the JBL Authentic 300?

For the best performance, connect the speaker to a power outlet.

Was this helpful? Thank you for your feedback!
How do I get the best surround experience with each game?

Every game has different audio output options and different ways the audio was designed. Some games make better use of multi-channel setups than others. We recommend you experiment with settings in the JBL QuantumENGINE to find the best match for your unique gaming style.

Was this helpful? Thank you for your feedback!
How do I keep the radio playing after having been awakened by radio?

After the wake-up process is finished, and the radio alarm has been turned off by pressing the alarm button, it is necessary to press the radio button to keep the radio playing.

Was this helpful? Thank you for your feedback!
How do I know if a game has surround sound output?

This changes from game to game, but most games have an “Audio Settings” section where you can adjust your game’s audio settings. Check the game’s official website for more information.

Was this helpful? Thank you for your feedback!
How do I know if my headset requires a firmware update?

You will get a notification or if you go to the System section, and the software button is highlighted with "Download Firmware", you can download and install the firmware.

Was this helpful? Thank you for your feedback!
How do I know if my software requires an update?

You will get a notification or if you go to the System section, and the firmware button is highlighted with "Download Firmware", you can download and install the firmware.

Was this helpful? Thank you for your feedback!
How do I know if the headphones are fully charged on the UA Train headphones?

As the headphones are charging, you will see a red solid light indicator at the bottom LEFT ear cup. Once the unit is fully charged, the red light will turn off.

Was this helpful? Thank you for your feedback!
How do I know if the Heart Rate sensor is in the correct position?

You will hear an audio prompt to readjust the position of the left ear piece stating “heart rate not detected, adjust ear bud position”. The sensor is also in the correct position when the green LED light is not visible from the outside of your ear.

Was this helpful? Thank you for your feedback!
How do I know that I have the best fit with the 500 Series headphones?

By habit, we try to shove earbuds into our ear canals in attempts to get them to stay in. The 500 Series headphone is a completely different concept. The tip of the enhancer (ear tip) should funnel gently down into the ear canal and the base of the enhancer should fill the entire concha (bowl) of your ear. If there is still quite a bit of space between the back of the enhancer, and the back of the bowl of the ear, there is nothing to support it and it will eventually fall out. Typically larger sizes will fill the extra space inside the concha. We recommend trying both sizes featured in the packaging. If you are still experiencing fit issues, please reach out to your local JBL Customer Support for information regarding different sizing options.

Was this helpful? Thank you for your feedback!
How do I know that JBL QuantumSURROUND Sound is turned on from my headsets?

You can check on the JBL QuantumENGINE Spatial Sound page or check whether the Spatial Sound slider on top is on

Was this helpful? Thank you for your feedback!
How do I know the battery level of my Under Armour Sport Wireless Heart Rate headphones?

Select the UA Sync icon in the upper right hand corner of the dashboard. If your headphones are connected, they will appear under "My Apps and Devices". Tap on "UA Sport Wireless Heart Rate" and you will see your headphones settings. Your headphones' battery life appears in the top left corner. If you have an IOS device, you also will be able to see the battery life indicator in the upper right hand corner next to the BT symbol. Additionally, you should hear the audible voice stating ‘low battery’ when you have 15-20 minutes left of battery life left on the headphones.

Was this helpful? Thank you for your feedback!