How To
How To
1674 results
-
You can enjoy streaming your favorite music over WiFi to your JBL BAR 9.1 Surround by adding it to your network. Turn on your soundbar. Download the Google Home app to your phone. Enable Bluetooth and Location services on your device. Open Google Home app Follow the instructions given in the app. You are now connected to your WiFi network and can enjoy streaming music to your system. The soundbar will now be able to automatically update, to make sure the performance is the best at all times.Was this helpful? Thank you for your feedback!
-
Citation One and Citation 100
- Press the Bluetooth
icon. Located on the top panel.
- Go to
-menu
Make sure Bluetooth is
- Find your Citation speaker and connect.
- You are now connected and ready to play music over Bluetooth, Enjoy!
Citation 300, 500, Bar and Towers
- Swipe up
on the display to find Bluetooth icon.
- Tap
- Find your Citation speaker.
- You are now connected and ready to play music over Bluetooth, Enjoy!
Was this helpful? Thank you for your feedback! - Press the Bluetooth
-
To connect any device to your headphone, please follow these steps below:
- First, hold the power ON/OFF button down for >5 seconds.
- The status light will pulse white when the headphones are in pairing mode.
- Next, release the power ON/OFF button.
- Next, go to the Bluetooth settings on your source device (Smartphone, tablet, etc.).
- Find the Mark Levinson No 5909 headphones in the Bluetooth list, and tap to connect.
- A solid white light indicates that you are connected to the headphones.
Was this helpful? Thank you for your feedback! - First, hold the power ON/OFF button down for >5 seconds.
-
Visit the App Store and download the ‘Amazon Alexa’ App.
- Click the Plus(+) button on the top right of the screen.
- Then select ‘Add Device‘.
- Select headphones from the list and then choose your Headphones from the list of available devices.
- Follow the rest of the instructions in the Alexa App to complete the setup.
Was this helpful? Thank you for your feedback! -
If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback! -
Visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback! -
To control the Light show on your JBL Partybox device, simply press the dedicated "Light show" button located under the Bluetooth icon. There are 3 different light shows available when toggling through them, select your favorite one and have a blast. There is no app developed to control or modify these settings, all settings have to be done on the Partybox device.Was this helpful? Thank you for your feedback!
-
Bluetooth Pairing
- Press the
button on the Partybox to start the pairing process.
- Grab your
device.
- Go to settings --> Bluetooth --> Enable Bluetooth -->
- Find the Partybox speaker you want to establish a Bluetooth connection to.
- You now have a successful connection and can stream your favorite music.
- NOTE: It is only possible to have two devices connected at the same time and if you want to listen through the second Bluetooth device then stop the current one from playing and use the second device.
- To stop Bluetooth broadcasting then insert a USB device.
Was this helpful? Thank you for your feedback! - Press the
-
In our latest update for Citation, we added a couple of new features.
We are going to talk about our new programmable preset feature.
With this feature, you can add a voice command such as "Turn off the lights in the Bedroom" or "Play my playlist Rock road classic" without using your voice.
Once you have recorded the action, you will see an icon on your Citation display. Tap on this specific recorded command, and the Citation will do all the magic for you!
Enough of what it can do, let us create a preset:- Scroll down on your Citation Display to you see "Voice presets."
- Press on the + sign.
- Say your command: Play Radio FM
- Do not use "Hey or OK, Google at this point."
- Press the "V" icon after the command is finished.
- Select an icon.
- Your Preset is now ready, tap it to give it a try.
- Press and hold down the preset.
- A menu will appear, hit the "TRASHCAN" icon.
Was this helpful? Thank you for your feedback! -
If you have two of the same model Google Assistant speakers, you can create a stereo speaker system.
How to create a stereo pair...
- Open the Google Home app
- Find the speaker you want to setup in stereo pair
- Find the speaker/room
- Tap on Settings
- Go to Sound Settings
- Find the Speaker pair
- You are now entering the setup page
Tap
- Find your speaker under the Pair with list and tap.
- Move the speaker to be Left or Right side and press
- You can tap on Play sound to identify which speaker it is.
- Find a name for your Stereo pair
- It takes a minute to complete the setup.
- When the configuration is done it will say Ready
- Press Done
NOTE 1: This is only possible with two of the same speakers. If they are not identical (Example: Citation 100 & Citation One), setting up a stereo pair will not be an option.
NOTE 2: It is only possible to use Chromecast and Bluetooth in stereo, Airplay will be mono (and should be grouped in iOS Airplay menu.
Was this helpful? Thank you for your feedback! - Open the Google Home app
-
There are two steps in the calibration
- Place the surround speakers beside your seating position and press the CALIBR button on the remote control. Follow the instruction to start the 1st calibration
- After the 1st calibration done, place the surround speakers in your desired location and press CALIBR on the remote control to start the 2nd calibration
Was this helpful? Thank you for your feedback! -
In Power On mode, press and hold 'Volume+' together with 'Play/Pause' for more than 2 seconds. The speaker will power off and is now reset.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00