JBL Quantum Stream Talk
USB streaming microphone
Sold from 2023 until now
Getting started with your JBL Quantum Stream Talk
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Power required/consumption
- 5 V ⎓ 500 mA
- Frequency response
- 50 Hz - 12 kHz
- Sensitivity
- -47±3 dB (1 kHz@1 Pa, 0 dB = 1 v/Pa)
- Maximum SPL
- 110 dB
- Sample rates
- 44.1kHz / 48kHz / 96kHz
- Bit rate
- 16 / 24 bits
- Capsules
- 6 mm Electret Condenser Microphone
- Polar patterns
- Super-Cardioid
- Headphones Amplifier Impedance
- 16 ohms / 32 ohms
- Headphones Power output (RMS)
- 23 mWrms per channel (Load = 32 ohms)
- Headphones THD
- <0.5% (Load = 32 ohms)
- Headphones Frequency response
- 20 Hz - 20 kHz
- Headphones Signal to noise
- 92 dB (A-weighted)
- Dimensions Mic with Stand (L x W x H)
- 10.5cm x 10cm x 18.5cm / 4.13" x 3.94" x 7.28"
- Weight Mic with Stand
- 146g / 0.322lbs
Sound is survival Let your voice be heard
Whether you're a streamer broadcasting your games on Twitch or a podcaster with a growing audience, the JBL Quantum Stream Talk will make sure your voice gets heard. The super cardioid pickup pattern of this sleek, functional design makes it perfect for a single voice, ensuring that any random noises elsewhere in the room won't get heard. A built-in shock absorber in the sturdy microphone stand also helps make sure your streams and recordings are as noise-free as possible. Monitor the audio stream in your headphones via the 3.5mm connection and the multi-function control knob, which also adjusts the mic's gain and loudness and quickly mutes you if a cough or sneeze creeps up on you. Use the included JBL QuantumENGINE PC software to adjust EQ, apply noise reduction, and perform a quick mic test, all from your computer screen.
FAQs & How-Tos
-
You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.Was this helpful? Thank you for your feedback!
-
You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.Was this helpful? Thank you for your feedback!
-
Sidetone is off by default.
To enable sidetone on your JBL Quantum Stream microphone, install and start JBL QuantumENGINE, and head to the "Microphone" tab.
Here you can select sidetone level from 0 to 3 (0 = off).
Was this helpful? Thank you for your feedback! -
To reset a Quantum headset, you need to connect the product to your computer and open the QuantumEngine.
When you have the QuantumEngine open, go to the "System Software" tap and press "Restore Factory Settings".
Only products that are compatible with the QuantumEngine can be reset this way.
Was this helpful? Thank you for your feedback! -
Try to move the microphone closer to the sound source and adjust it for a better angle. You should also try to increase the microphone volume to an appropriate level by turning the volume up.
Finally, try to increase or decrease the microphone gain level if the sound is distorted.Was this helpful? Thank you for your feedback! -
In every microphone there are polar patterns that describes the microphone directionality. Different polar patterns describe how well the microphone module picks up sound waves coming from different directions.
There are four different polar patterns which can be used for different situations. The Cardioid pattern is the best option when you are recording on your own. The Omni-directional pattern is the most suitable for recordings with multiple people from different directions. The Stereo pattern is most optimal when two people are sitting next each other or playing an instrument during a recording. The bidirectional pattern works the best when two people are sitting opposite each other.
Was this helpful? Thank you for your feedback! -
If your teammates can not hear you, make sure of the following:
USB is correctly plugged in
Only one voice chat application is in use while in-game.
The mic input is set to JBL Quantum Stream.
Mic gain is not turned all the way down
Mic is not muted (mute/unmute by pressing the touch panel on top of the mic). By default the RBG will indicate red for muted, and green for unmuted(active).Was this helpful? Thank you for your feedback! -
JBL Quantum 300, 350, 360P/X, 400, 600, 610, 800, 810, 910, 910 P/X, ONE, TWS, TWS Air, Stream, Stream Talk, Stream Studio and Stream Wireless are working with the QuantumENGINE.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00