JBL PartyBox Wireless Mic

JBL PartyBox Wireless Mic

Two digital wireless microphones designed for use with the JBL PartyBox speakers

Sold from 2024 until now

Getting started with your JBL PartyBox Wireless Mic

Getting started with your JBL PartyBox Wireless Mic

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Specifications

Carrier Frequency
2404 - 2478MHz
Encryption
AES - 128
Working Range
30m (100ft)
Latency
< 12ms
Frequency / Channel selection
Adaptive channel selection
Frequency Response
50Hz - 15KHz
Dynamic Range
100dBA @ 1KHz
Signal -to -Noise
59dBA
THD
< 1% @ 94dB SPL, 200 - 10KHz
Transimitting power
< 10dBm
Receiver maximum output level
< 1V RMS
Microphone Head
16mm ECM
Microphone Dimensions (W x H x D)
45.5 x 224.5 x 42.5mm / 1.79'' x 8.84'' x 1.67''
Microphone Weight
270 g / 0.6 lb
Dongle Dimension (W x H x D)
42 x 96.5 x 18mm / 1.65'' x 3.8'' x 0.71''
Dongle Weight
43 g /0.095 lb
Gift Box Dimension (W x H x D)
131 x 72 x 236mm / 5.16'' x 2.83'' x 9.29''
Gift Box Weight
854 g / 1.88 lb
Microphone Rechargeable Battery
600mAh, 3.7V Li-ion battery
Dongle Battery
700mAh 3.7V Li-ion battery
Playtime of Microphone
up to 20 hours
Playtime of Dongle
up to 12 hours
Microphone battery charge time
< 2.5H in off mode
Dongle battery charge time
< 2.5H in off mode

Unleash your voice

Make your good times even better with JBL PartyBox Wireless Mics. Just plug them into any JBL PartyBox, or use the dongle for the freedom of a wireless connection, and let your voice be heard. Indoors or outside, you'll sound clear and captivating on these mics specially tailored to sound amazing over any PartyBox speaker. A built-in foam pop filter minimizes any extraneous vocal sounds as you sing a duet with your best friend, and a shock mount system keeps things quiet when you're passing the mic to someone else. Up to 20 hours of play time and because you can still use a mic even while it's charging on the PartyBox's built-in power bank, the fun will last as long as the party does. Rock the house with the JBL PartyBox Wireless Mic.

The cardioid pickup pattern of these mics deliver a warm, clear, and crisp vocal sound that's designed to make everyone sound their best over any JBL PartyBox.
A shock mount system minimizes the sound of the mics passing from one hand to another, while a built-in pop filter eliminates any extraneous breathing sounds that you don't want to be part of your performance.
Just plug in and start singing. It's really that simple.
From the PartyBox Encore to the Ultimate, you can use the mics with any JBL PartyBox speakers.
Keep the party going all night with up to 20 hours* of play time. (*up to 12 hours play time when using the digital wireless dongle.)
Just plug the mic into the JBL PartyBox's charging port when your battery is running low. You can keep using it while it charges. 10 minutes of charging will get you another two hours of playtime.
When using the digital wireless dongle, you have a stable 2.4GHz connection within 30 meters of the PartyBox. So don't be afraid to go out and work the crowd.
The JBL PartyBox Wireless Mic is packaged in FSC-certified paper printed with soy ink.

FAQs & How-Tos

1 results
  • While the Partybox Encore does not have a Microphone Input, it does have an internal receiver for the wireless microphone that comes with the product.

     

    It is possible to pair one of the microphones from the Partybox Wireless Mic * (sold separately from the Partybox Encore, containing 2 x Wireless Microphones and 1 x Receiver/Dongle for connection with 6.3 mm microphone jack inputs) - however, a maximum of 2 wireless microphones can be connected to the receiver at a time.

     

    As an alternative, a spare part accessory is available (dependent on stock levels), which includes just 1 x Microphone for Partybox Encore - search for the aforementioned product name or "FG7261JMJ100114" in our online store.

     

    To connect an additional Wireless Microphone to the Partybox Encore, follow these steps:

    Switch off the Partybox & both microphones.

    Once off, switch on both microphones only, then switch on the Partybox and both microphones should connect to the receiver.

    If not, please try the same instructions as above expect with a Factory Reset (Press and hold the "Play" and "Light" buttons for > 10 seconds) instead of the restart above, then follow the microphone pairing procedure:

    1. Turn off the speaker.

    2. Make sure that the distance between the new wireless microphone and speaker is within 1 meter. Turn on the microphone.

    3. Turn on the speaker. The microphone will pair and connect with the speaker automatically within 3 minutes.

     

    *Please note that regarding the older version of the JBL Partybox Wireless Mic - the JBL Wireless Microphone Set - the microphones are not compatible with the Partybox Encore whatsoever, as they use UHF instead of 2.4 GHz for communication between the microphones and receiver (and the Partybox Encore does not have a Microphone Input).

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +44 161 222 3325

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00

message

WhatsApp Us

Send us a message on +44 161 222 3325 or click  here 

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00