SCL-5
Two-way 7-inch (180mm) In-Ceiling Loudspeaker
Documents & Downloads
Specifications
- Type
- 2-Way In-ceiling loudspeaker
- Low Frequency Driver
- 7” (180 mm) advanced Aluminum Matrix cone cast-frame woofer (JW180PB-6)
- High Frequency Driver
- 1" (25 mm) 2409H Teonex annular ring-diaphragm compression driver
- Recommended Amplifier Power
- 25 – 125W RMS
- Impedance
- 6 Ohm
- Loudspeaker Sensitivity
- 86 dB/2.83V/1m (2pi anechoic)
- Frequency Response
- 48Hz - 32kHz (-6 dB on-axis), 2pi anechoic
- Crossover Frequency
- 1575 Hz
- High Frequency Coverage Angle (-6 dB)
- 60-degree Vertical (Up
- Enclosure Type
- Open back
- Controls
- Boundary Proximity Control
- Grille Dimensions
- Round - 12.5" (318 mm) diam.
- Grille Dimensions
- Square - 12.5" (318 mm) x 12.5" (318 mm)
- Product Dimensions (with grille)
- 12.5" H x 12.5" W x 5.98" D (318 mm x 318 mm x 151.9 mm)
- Cut-out Diameter
- 11.2" (285 mm)
- Accessory Rough-in Bracket
- CB10
- Mounting Depth
- 5.58" (141.8 mm)
- Input Type
- Gold-plated spring-loaded binding posts
- Product Weight
- 8.6 lb. (3.9 kg), 9.2 lb. (4.2 kg) with one grille
- Shipping Weight
- 12.5 lb. (5.7 kg)
- Shipping Units of Measure
- Each
- Warranty
- 5 Years
- 2-way in-ceiling loudspeaker system
- 6.5-inch (165mm) Cast-frame, advanced aluminum matrix Cone with low-distortion neodymium motor structure
- D2-derived 1-inch / 25mm D2409H annular ring, Teonex® diaphragm compression driver
- High-Definition Imaging (HDI™) waveguide
- Retractable Cat Claws mounting system for easy installation
- Hi Frequency Level and Boundary Compensation switches
- Rotatable, angled baffle
- Metal back can be integrated with system
- Sealed / acoustic suspension design
- Gold plated, spring-loaded, push type binding post terminals
- Zero-bezel, magnetically attached round and square grilles
SCL-5
The SCL-5 is the highest performance traditional round in-ceiling model in the JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for use as a height channel or in-ceiling LCR or surround channel loudspeaker. The SCL-5 features JBL’s patented 2409H 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI™) horn. This patented horn design is integrated with an angled 7-inch (180mm) Advanced Aluminum Matrix cone cast-frame woofer operating behind an acoustic aperture waveguide. The innovative configuration yields incredibly smooth and consistent performance for off-axis placement up to 60 degrees from the listening position. The SCL-5 is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesis immersive audio solution. It is ideal for use in medium to large rooms.
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00