Onyx Studio 2
Wireless Speaker System with rechargeable battery and built-in microphone
Getting started with your Onyx Studio 2
Documents & Downloads
Specifications
- Power Requirement
- 100 – 240V AC, 50/60Hz
- Power Consumption
- 38W maximum less than 1W standby
- Maximum SPL
- 95dB @ 1m
- Bi-amplification
- 4 x 15W
- Power adaptor
- 19V, 2.0A
- Built-in battery
- 3.7V, 2600mAh, Cylindrical Lithium Ion Rechargeable Battery
- Battery charge time
- 5 hours
- Speaker Impedance
- 4 ohm per speaker
- Frequency range
- 2402MHz – 2480MHz
- Transmitter power
- less than 4dBm
- Modulation
- GFSK/π/4-DQPSK / 8DPSK
- Wireless
- Bluetooth 3.0 A2DP v1.3 AVRCP v1.5
- Dimensions (Dia x W x H)
- 280mm x 161mm x 260mm
A beautiful and powerful audio performance
The Harman Kardon Onyx Studio 2 provides best-in-class audio that is delivered in an iconic design that is destined to become the centerpiece of any room. With the convenience of wireless Bluetooth connectivity and a rechargeable Li-ion battery, you and your music can cut cords and enjoy up to 5-hour playtime anytime, anywhere. Harman Kardon Onyx Studio 2 comes with new features such as a built-in speakerphone with Harman VoiceLogic echo and noise cancellation as well as an auxiliary input. Crafted with premium materials, Onyx Studio2 has been engineered to enhance your demanding lifestyle with the sophisticated, audio excellence expected from Harman Kardon.
FAQs & How-Tos
-
Yes, turn on your Onyx studio 2 and hold down phone button & volume + at the same time. Onyx Studio 2 will power off and when you power it on again, it has been reset.Was this helpful? Thank you for your feedback!
-
Bluetooth keeps on playing, even if you connect something and play to the AUX input. BT keeps on playing, since it has first priority. If you pause or stop BT play, any source playing to the AUX input will now be heard. If you resume play on the BT source, it will take over, and the AUX source is no longer heard, but will of course keep on playing, since there is no way to send a pause or stop signal to the AUX source via the line cable. All of this means that there is an input selector switch built into the device, controlled by the BT play function.Was this helpful? Thank you for your feedback!
-
With the Onyx Studio 2 switched ON, the ON/OFF switch light flashes while the unit is charging. If the unit is switched OFF, no indication shows that charging is taking place, but charging still takes place. When charging is complete, the light becomes constant. There is no battery status indication, so it is not possible to follow the power level of the battery.Was this helpful? Thank you for your feedback!
-
Press and hold the Phone and VOL + button simultaneously.
After 5 seconds, the unit powers Off, and is now reset.Was this helpful? Thank you for your feedback! -
To use the Onyx Studio 2 with a PC or MAC, please make sure that you have the correct Bluetooth driver, that supports A2DP Audio Codec.Was this helpful? Thank you for your feedback!
-
Yes, it will power off after removing charging cable. It is by design.Was this helpful? Thank you for your feedback!
-
No, it is not possible to link them together. They are standalone Bluetooth speakers.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+44 161 222 3325
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00
Chat with us
Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00