JBL LINK VIEW
JBL legendary sound in a Smart Display with the Google Assistant.
Sold from 2018 until now
Getting started with your JBL LINK VIEW
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Transducer
- 2 x 51mm (2”) full range driver
- Output power
- 2 x 10W RMS
- 5MP front facing camera
- 8” HD touch screen
- 2.4G Wi-Fi transmitter frequency range
- 2412 – 2472MHz (2.4GHz ISM Band, USA 11 Channels, Europe and others 13 Channels)
- 2.4G Wi-Fi transmitter power
- <20dBm (EIRP)
- 2.4G Wi-Fi modulation
- OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM
- 5G Wi-Fi transmitter power
- <20dBm (EIRP)
- 5G Wi-Fi modulation
- OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM, 256QAM
- 5G Wi-Fi transmitter frequency range
- 5.15 - 5.35GHz, 5.470 - 5.725GHz, 5.725 - 5.825GHz
- Gross Weight
- 1.9kg
- Net Weight
- 1.3kg
- Note
- The integrated display of the JBL Link View allows you to get things done easily. According to the definition of networked equipment with high network availability functionality set out in commission regulation (EU) No 801/2013 amending Regulation (EC) No 1275/2008, the product is considered as a networked equipment with functionality of videophone. Therefore, JBL Link View exempts from the requirements for availability of standby/off modes, power management function and possibility of deactivating wireless network connections, if these requirements are found, it will be inappropriate for the intended use of the product. JBL Link View is in compliance with the European Union energy legislation. JBL Link View is in active standby mode once the device is plugged into a wall socket.
- Active standby consumption
- <4.3 Watts.
- Trademark
- Google is a trademark of Google LLC.
- Frequency response
- 60Hz-20kHz (-6dB)
- Signal-to-noise ratio
- >80dBA
- Dimensions (W x H x D)
- 332 x 152 x 100mm
- Bluetooth version
- 4.2
- Bluetooth transmitter frequency range
- 2402 – 2480MHz
- Bluetooth transmitter power
- ≤10dBm (EIRP)
- Bluetooth transmitter modulation
- GFSK, π/4 DQPSK, 8DPSK
- Wireless network
- 802.11b/g/n/ac (2.4GHz/5GHz)
- Power Supply
- 100-240V~50/60Hz
Legendary sound. Now in a Smart Display with the Google Assistant.
Get more than legendary sound. The integrated display included on JBL LINK VIEW allows you to get things done easily. It also has the Google Assistant built in, you can ask questions and tell it to do things. Just start with “Hey Google” to quickly enjoy your entertainment, stay connected with loved ones, view glanceable answers, manage daily tasks, and control your smart home. Your Assistant can help free up your hands and time, so you can focus on the things that matter most. Like watching videos of your favorite YouTube creators, reliving memories of your latest family vacation, making a video call to your best friend, receiving step-by-step baking instructions for delicious chocolate chip cookies, or dimming the lights for movie night. All this is delivered through a proprietary JBL transducer array, driven by a digital amplifier tuned to deliver full rich bass and crystal clear highs. This amazing combination of the Google Assistant, JBL Audio horsepower and HD display make JBL LINK VIEW a must have for your home or office. Google, Google Photos, Google Duo, YouTube and other related marks are trademarks of Google LLC.
FAQs & How-Tos
-
1. Open the Google Home app 2. Select the LINK VIEW 3. Select SETTINGS. 4. There is a line that says Paired Bluetooth Devices. 5. When you select it, it gives you the option to ENABLE PAIRING MODE. 6. Use your voice - "Hey Google, Open Bluetooth" and LINK VIEW will enable Bluetooth connection. You can disable Bluetooth using "Hey Google, Close Bluetooth" Once you have enabled Bluetooth pairing mode on your LINK VIEW, simply go into your Bluetooth settings menu on your mobile device and connect.Was this helpful? Thank you for your feedback!
-
Close and restart the Google Home app, or restart your phone. Start the Google Home app again, and the speaker should now appear.
Was this helpful? Thank you for your feedback! -
The Checklist
Let us walk-through a list of things needed to ensure every requirement is met.
- Check your mobile device if that is able to connect to same Wireless network.
- Make sure you are within range of your Wireless router.
- Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
- Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.
- You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
- You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
- Try using a different mobile device, if you have one.
- Reboot your Wireless network router and your mobile device.
Wireless Network Extender
Some houses or apartments can be too big for one Wireless network router to cover it all.
Let's talk about the issues that might appear with an Extender network.- Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
- Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
- Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
- To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
- In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).
One Wireless Network Name (SSID)
- You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
- If the speaker is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
- To solve this issue, using two different name for your extended network will help with the performance of the Speaker and Google Assistant request.
Was this helpful? Thank you for your feedback! -
If you see this message, you must download the Device Utility app from the Google Play Store. Follow the instructions in the app to activate your speaker, and then return to the Google Home app to complete the setup.
Was this helpful? Thank you for your feedback! -
If the network does not appear, you can manually type in the network name (SSID) and password to connect.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00