Documents & Downloads
Product Specifications
- MSRP U.S.
- $249.95 each
- Dimensions (H x W x D)
- 4 x 17-3/8 x 14-1/2
- Usable Sensitivity
- FM MONO – 2.5uV
- Quieting Sensitivity
- MONO -4.0uV
- Quieting Sensitivity
- STEREO – 45uV
- Signal-to-Noise Ratio
- FM STEREO – -72dB
- Capture Ratio
- FM... 1.9dB
- Alternate Channel Selectivity
- AM... 40dB
- Alternate Channel Selectivity
- FM… 60dB
- IF Rejection
- 85dB AM – 25dB
- AM Rejection
- FM... 50dB
- Stereo Separation
- 45dB, 1kHz
- Total Harmonic Distortion
- FM MONO – 0.1%, 1kHz, 100% modulation
- Total Harmonic Distortion
- FM STEREO – 0.12% 1kHz, 100% modulation
- Sensitivity
- AM... AM – 300uV/m
- Selectivity
- AM – 35dB
- Image Rejection
- AM – 45dB
- Amplifier Power (RMS)
- 20 watts per channel @ <0.09% THD primarily low order harmonics (@ 8 ohms from 20Hz – 20kHz)
- Power Bandwidth
- <10Hz – 60kHz @ half rated output with 8 ohms
- Frequency Response
- <4Hz – 150kHz (+0/–3dB @ rated output)
- Total Harmonic Distortion
- 0.05% primarily low order harmonics (1kHz @ rated output)
- Transient Intermodulation Distortion (TIM)
- 0.20% @ rated output
- High Instantaneous Current Capability (HCC)
- ± 10 Amps
- Slew Rate
- 60 volts/uSec
- Rise Time
- SQUARE WAVE – 2.5uSec @ 20kHz
- Square Wave Tilt
- 8% @ 20kHz
- Negative Feedback
- 22dB
- Damping Factor
- 60 (at 8 ohms, 20Hz – 20kHz)
- Hum and Noise
- PHONO – -80dB A-WTD
- Hum and Noise
- AUX --85dB A-WTD
- Input Sensitivity
- PHONO -2.2mV
- Input Sensitivity
- AUX -135mV
- Input Level/Impedance
- PHONO – 125pF/47k ohms
- Phono Overload
- >130mV
- RIAA Equalization
- ±1dB
Stereo Receiver (20 watts x 2)
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(877) 871-6755
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
