Support Overview / Home Audio / Receivers / Receivers - Stereo / HK 3380

HK 3380

Stereo Receiver (80 watts x 2)

Sold from 2004 until 2007

Predecessor Product:	HK 3375
Successor Product:	HK 3385
Made in:	China

Documents & Downloads

Manuals

Product Specifications

General Specifications

Power Requirements: AC 120V/60Hz

Power Consumption: 3W standby, 200W maximum (both channels driven)

Digital Inputs (coaxial/optical): None

Analog Inputs: 1 A/V on front panel

Analog Inputs: 3 A/V on rear panel

Analog Inputs: 3 audio-only

Analog Inputs: tuner

On-Screen Display: No

Multizone Capability: Speaker A/B switch

Remote Control: Five-device system remote

Shipping Weight (System, Accessories, Packing): 25.1 lb (11.41kg)

MSRP U.S.: $349.95 each

Audio Specifications

# of Amplifier Channels: 2

Stereo Mode:

Continuous Average Power (FTC) per Channel: 80 Watts per channel, 20Hz – 20kHz @ <0.07% THD, both channels driven into 8 ohms 100 Watts per channel, 20Hz – 20kHz @ <0.2% THD, both channels driven into 4 ohms

Input Level/Impedance: 200mV/47k ohms - Linear (High-Level)

Signal-to-Noise Ratio: 95dB (IHF-A)

Frequency Response: 10Hz – 110kHz (+0/-3dB @ 1 watt)

Transient Intermodulation Distortion (TIM): Unmeasurable

Rise Time: 16µsec

Slew Rate: 40V/µsec

Dimensions

Width: 17.4 inches (442mm)

Height: 6.6 inches (168mm)

Depth: 15 inches (382mm)

Weight: 20.9 lb (9.48kg)

Dimensions:

Carton Dimensions: 21.5 inches x 9.9 inches x 17.9 inches (545mm x 251mm x 455mm)

Video Specifications

Television Format: NTSC/PAL/SECAM

Signal Format System: Composite

Input Level/Impedance: 1Vp-p/75 ohms, unbalanced

Sync Polarity: Negative

Output Level/Impedance: 1V/75 ohms, unbalanced

Video Frequency Response: 10Hz – 10MHz

Tuner Specifications

Frequency Range: AM... 520 – 1710kHz

Frequency Range: FM... 87.5 – 108MHz

Signal-to-Noise Ratio: AM... >40dB

Usable Sensitivity: FM... IHF 1.12µV/13.5dBf

Signal-to-Noise Ratio: FM... Mono/Stereo 73/72dB

Usable Sensitivity: AM... Loop 500µV/M

Distortion: AM... 1kHz, 50% Mod 0.8%

Distortion: FM... Mono/Stereo 0.3/0.4%

Selectivity: AM... ± 10kHz, >25dB

Stereo Separation: FM... 40dB @ 1kHz

Selectivity: FM... ± 400kHz, 65dB

Image Rejection: FM... >80dB

IF Rejection: FM... >100dB

Tuner Output Level: FM... 1kHz, ±100kHz, Dev 500mV

Amplifier Specifications

Amplifier Power (RMS): 80 x 2 @ 8 ohms, (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)

High Instantaneous Current Capability (HCC): ± 42 Amps

Perfect for a main music system, the HK 3380 uses the same discrete high-current, ultrawide-bandwidth-amplifier technology found in our AVR Series receivers. It also has four video inputs (including one on the front panel), a multicomponent system remote control, a 30-preset AM/FM section, a phono preamp, a subwoofer output, a dimmable fluorescent display, pre-out/main-in jacks and even a nine-step, 90-minute sleep timer.