AVR 2550
AVR 2550 AV Receiver
| Made in: | China |
|---|
Product Specifications
- Power Requirements
- AC 220 – 240V / 50Hz
- Power Consumption
- 68W idle, 540W maximum (2 channels driven)
- Continuous Average Power (FTC) per Channel (stereo mode)
- 50 Watts per channel @ <0.07% THD, 20Hz – 20kHz both channels driven into 8 ohms
- Front L & R Channels
- 40 Watts per channel @ <0.07% THD, 20Hz – 20kHz all channels driven into 8 ohms
- Center Channel
- 40 Watts @ <0.07% THD, 20Hz – 20kHz all channels driven into 8 ohms
- Surround Channels
- 40 Watts per channel @ <0.07% THD, 20Hz – 20kHz all channels driven into 8 ohms
- Input Level/Impedance
- 200mV/47k ohms - Linear (High-Level)
- Signal-to-Noise Ratio
- 95dB (IHF-A)
- Analog Source Decoding
- 45dB
- Frequency Response
- 10Hz – 100kHz (+0/-3dB @ 1 watt)
- High Instantaneous Current Capability (HCC)
- ± 25 Amps
- Transient Intermodulation Distortion (TIM)
- Unmeasurable
- Slew Rate
- 40V/µsec
- Weight
- 10.8kg
- Dimensions (H x W x D)
- 168 x 440 x 390 mm
- Video Formats
- NTSC
- Input Level/Impedance
- 1Vp-p/75 ohms
- Output Level/Impedance
- 1V/75 ohms
- Video Frequency Response
- 10Hz – 8MHz (-3dB)
- Frequency Range
- AM... 520 – 1720kHz
- Frequency Range
- FM... 87.5 – 108.0 MHz
- Signal-to-Noise Ratio
- AM... 45dB
- Usable Sensitivity
- FM... IHF 1.3µV/13.2dBf
- Signal-to-Noise Ratio
- FM... 70/68 dBA (Mono/Stereo)
- Usable Sensitivity
- AM... Loop 500µV
- Distortion
- AM... 1kHz, 50% Mod 0.8%
- Distortion (Mono/Stereo)
- FM... 0.2/0.3 %
- Selectivity
- AM... ± 10kHz, 30dB
- Stereo Separation
- FM... 40dB @ 1kHz
- Selectivity
- FM... ± 400kHz, 70dB
- Image Rejection
- FM... 80dB
- IF Rejection
- FM... 90dB
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(877) 871-6755
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
