Support Overview / Car & Marine / Car Electronics / Amplifiers / Amplifiers (4-channel) / GRAND TOURING GTO 504EZ
GRAND TOURING GTO 504EZ

GRAND TOURING GTO 504EZ

4-channel amplifier (50 watts x 4)

Sold from 2012 until now

Predecessor Product: GT5-A402
Made in: China

Documents & Downloads

Product Specifications

Series
Grand Touring
Type
4-Channel
Amplifier Power (RMS)
640W (160W x 4 @ 2 ohms), 15.5V DC, 10% THD, one channel driven @ a time
MSRP U.S.
$239.95 each
Number of Channels/Type
4
4-Ohm Power Output
50W RMS x 4 channels at 4 ohms, 14.4V DC, less than 1.0% THD
Frequency Response
20Hz-23kHz
2-Ohm Power Output
75W RMS x 4 channels at 2 ohms, 14.4V DC, less than 1.0% THD
Maximum Current Draw
40A
Peak Power
640W
Signal-to-Noise Ratio
>85dB
Width (in)
9-11/16"
Weight (kg)
2.9
Weight (lb)
6.4
Height (mm)
66
Depth (mm)
213
Depth (in)
8-3/8"
Height (in)
2-9/16"
Width (mm)
246
Weight
6.4 lb (2.9kg)
Dimensions
(D x H x W)... 8-3/8 inch x 2-9/16 inch x 9-11/16 inch (213mm x 66mm x 246mm)

High-performance multichannel power for enhanced sound on the move.

Finally, high-performance amplifiers that are easy to install and calibrate. The JBL® GTO-504EZ multichannel car audio amplifier provides unmatched ease of installation, configuration and calibration – processes that are necessary to produce clean, powerful sound. Whether you’re upgrading an OEM (original-equipment manufacturer) audio system or installing an aftermarket system, this amplifier offers virtually limitless applications with wired or auto-sensing turn-on – without making you fuss with adding third-party adapters or converters. These amps drive up to 15 volts of audio signal right to the inputs with either line-level or speaker-level signals. And they come with RCA-to-bare-wire adapters and a setup CD. Experience the clean and powerful output of GTO Series amplifiers in a variety of channel configurations and power ratings, all of which are CEA®-2006A compliant and backed by the JBL reputation for top quality.

The GTO-504EZ four-channel model features 4x50 watts RMS (640 watts max). It has selectable high-pass/low-pass active crossovers and bridgeable channel pairs for total flexibility. Use this amplifier to upgrade from four channels of built-in head-unit power in an aftermarket system, as a building block in a growing system design or, by bridging both channel pairs, as a more powerful amplifier for premium component speakers.
The GTO-504EZ amplifier includes an input-level switch, a setup CD with test signals and LED indicators to tell you when the setting is correct. Simply set the switch, turn the input-level knob and watch for the green light that indicates that the setup is perfect. That’s all there is to it. There’s a reason why the amplifier’s model number contains EZ. This feature significantly reduces installation time and delivers excellent results.
JBL engineers have configured the JBL GTO-504EZ amplifier to turn on with a wired input (as in aftermarket systems) or with an auto-sensing circuit that activates whenever the amp detects an audio signal. The auto-sensing feature is helpful when you’re upgrading OEM audio systems that don’t include a remote trigger wire. It’s easily defeated by a switch when you’re using a wired remote turn-on input.
The GTO-504EZ amplifier accepts a wide range of inputs up to 15 volts with line-level or speaker-level signals. Using RCA-to-bare-wire adapters included with the amplifier, you can connect to virtually any OEM or aftermarket audio system. The end result is an amplifier that works with the widest range of cars on the road.
Active 12-decibel/octave low-pass crossovers offer variable filter points between 40Hz and 280Hz. You can select high-pass (HP) filtering, low-pass (LP) filtering or OFF. Importantly, all filter points on the adjustment dial match the silkscreened frequency points on the amplifier chassis – a feature that not all amps provide.
The GTO-504EZ provides a range of bass boost from 0 decibels to +12 decibels, centred at 45Hz. This is a useful feature for restoring some bass that may be limited by the low-frequency response of certain speakers in the system – or to enhance a particular range of bass that the speakers already produce well.
Pairs of the GTO-504EZ system amplifier’s main channels can be bridged into a single, more powerful channel. This setup is useful for flexible audio system designs in a growing system or for full-range speakers in a system that needs more power.
Amplifier protection is just like insurance; you hope you’ll never need it, but it’s sure nice to have when you do. Thermal protection keeps the GTO-504EZ system amplifier from overworking itself to the point of premature failure. Low-impedance protection keeps the amplifier safe from any speaker or wiring failures that result in short circuits.

Images & Videos

  • GRAND TOURING GTO 504EZ - Black - 4-channel amplifier (50 watts x 4) - Hero
  • GRAND TOURING GTO 504EZ - Black - 4-channel amplifier (50 watts x 4) - Left
  • GRAND TOURING GTO 504EZ - Black - 4-channel amplifier (50 watts x 4) - Right

Can’t find what you’re looking for?

Call us

Call us

To speak to our customer service specialist

1800-102-0525

Mon to Sun 10 AM to 7 PM IST

message

Message Us

Chat with a support agent via Whatsapp at:
91 70658 44446

Mon - Sun: 10:00 am - 7:00 pm (IST)