JBL Tour Pro 3
True Adaptive Noise Cancelling earbuds with JBL Spatial 360 headtracking and an audio transmitter Smart Charging Case™
Getting started with your JBL Tour Pro 3
Documents & Downloads
Product Specifications
- Driver size (mm)
- 10.2 mm/ 0.402" Dynamic Driver + 5.1 mm x 2.8 mm Balanced Armature
- Number of Microphones
- 6
- Driver sensitivity at 1kHz/1mW (dB)
- 104
- Dynamic frequency response range (Hz)
- 20 Hz - 40 kHz
- Impedance (ohms)
- 32
- Charging Case Weight (g)
- 71.8
- Charging Case Weight (oz)
- 2.5
- Earpiece Weight (g)
- 5.6
- Weight (g)
- 83
- Weight (oz)
- 2.9
- Bluetooth profiles
- A2DP V1.4, AVRCP V1.6.2, HFP V1.8
- Bluetooth frequency
- 2.4 GHz – 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4-DQPSK, 8DPSK
- Bluetooth transmitter power
- <13 dBm (EIRP)
- Bluetooth version
- 5.3
- Speed Charging time (hours)
- 3
- Charging case battery life (max hours)
- 33
- Charging time (hours from empty)
- 2
- Maximum music play time with ANC off (hours)
- 11
- Maximum music play time with ANC on (hours)
- 7
- Maximum play time (hours)
- 44
- Maximum talk time (hours)
- 5.5
- Smart case
- Yes
- JBL Original Pro Sound
- Yes
- True Adaptive Noise Cancelling
- Yes
- Bluetooth
- Yes
- Charging cable
- Yes
- Built-in Microphone
- Yes
- Charging case
- Yes
- JBL Headphone App
- Yes
- Rechargable battery
- Yes
- Spatial Sound
- Yes
- Touch Control
- Yes
- True Wireless
- Yes
- Water Resistant
- Yes
- Wireless
- Yes
- IPX
- 55
Sound, like you never heard before
Get ready for the smartest True Wireless earbuds yet. JBL Tour Pro 3 earbuds come in a newly redesigned Smart Charging Case™ with a handy and more feature-packed touchscreen, giving you full control over your listening experience—while your phone stays in your pocket. Connect seamlessly with any Bluetooth® device and immerse yourself in your music, movies, and games with JBL Spatial 360 sound with head tracking. The JBL Tour Pro 3 are also powered by legendary Hi-Res JBL Pro Sound. When it’s time to work, tune out the world with Real-Time True Adaptive Noise Cancelling. On a flight, use the Smart Charging Case™ as an audio transmitter dongle to wirelessly connect to the inflight system (or PC) and enjoy cinematic sound experience while you're in the air. Or at your desk, easily connect the Smart Charging Case™ to your computer, for perfect call quality.
FAQs & How-Tos
-
Yes, both the Smart case and the Smart Tx are synched wirelessly to the headphones and can be used simultaneously.
Was this helpful? Thank you for your feedback! -
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all TWS earphones and cases.Was this helpful? Thank you for your feedback! -
The built-in Digital-to-Analog Converter (DAC) makes it possible to enjoy lossless high sound quality with low distortion and accurate conversion.
Connect the headphones with the included USB-C cable or 3.5mm aux cable to any audio source to enable Hi-Res audio. If you want to have Hi-Res audio wirelessly you need to connect an Android device with at least Android OS 13 or higher and use streaming sources such as Apple Music, Tidal or Amazon Music.
Was this helpful? Thank you for your feedback! -
JBL Pro Sound is achieved through robust 40mm Mica Dome drivers, which are precisely tuned to deliver deep bass, balanced mids and crystal-clear highs. Each Mica Dome deliver refined high frequencies above 40kHz for the best on-the-go listening experience. Mica is a renewable mineral that can be split into extremely thin elastic plates, making it flexible enough to respond fast and precisely to the electrical signals in headphone drivers.
Was this helpful? Thank you for your feedback! -
Spatial sound gives a more natural, realistic and accurate immersive experience whether you are listening to music, movies or games.
The technology processes more details from any stereo content, which generates reflections and reverberation signals. The integrated head tracking means that sound stay fixed in space even when you turn your head, which adds a new layer of realism to your immersive listening.
Was this helpful? Thank you for your feedback! -
Make sure both headphones are fully charged to ensure that the issue is not due to one of the earbuds lacking power.
Check that the contact points on the headphones and the charging case are clear of dirt, so the issue is not due to the product not being able to charge.
The LED on the headphones will show a blue light when correctly inserted in the charging case.
Try to reset the headphones if the product is fully charged but are still only working in Mono mode.
A reset guide for the headphones can be found here: Reset guide
Was this helpful? Thank you for your feedback!