JBL Live 660NC
Wireless over-ear NC headphones
Sold from 2020 until now
Getting started with your JBL Live 660NC
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Driver size (mm)
- 40
- Number of Microphones
- 2
- Driver sensitivity at 1kHz/1mW (dB)
- 97 dB SPL@1 kHz/1 mW
- Dynamic frequency response range (Hz)
- 16 Hz – 20 kHz
- Impedance (ohms)
- 32
- Audio Cable Length (ft)
- 3.9
- Audio Cable Length (m)
- 1.2
- Ear Cup Depth (cm)
- 2.1
- Ear Cup Depth (in)
- 0.8
- Ear Cup External Height (cm)
- 9.3
- Ear Cup External Height (in)
- 3.7
- Ear Cup External Width (cm)
- 7.6
- Ear Cup External Width (in)
- 3
- Ear Cup Internal Height (cm)
- 6.4
- Ear Cup Internal Height (in)
- 2.5
- Ear Cup Internal Width (cm)
- 4.7
- Ear Cup Internal Width (in)
- 1.9
- Headphone Cable Length (m)
- 0.2
- Headphone Cable Length (ft)
- 0.7
- Weight (g)
- 265
- Bluetooth profiles
- HFP V1.7, A2DP V1.3, AVRCP V1.6
- Bluetooth frequency
- 2.4 GHz – 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth transmitter power
- < 10 dBm
- Bluetooth version
- 5.0
- Charging time (hours from empty)
- 2
- Maximum music play time with ANC off (hours)
- 50
- Maximum music play time with ANC on (hours)
- 40
- Maximum play time (hours)
- 50
- Bluetooth
- Yes
- Charging cable
- Yes
- Voice Assistant integration
- Yes
- Adaptive Noise Cancelling
- Yes
- Ambient Aware
- Yes
- Built-in Microphone
- Yes
- Carrying pouch
- Yes
- Fabric headband
- Yes
- Hands Free Call
- Yes
- JBL Headphone App
- Yes
- JBL Signature Sound
- Yes
- Multi-Point Connection
- Yes
- Over-ear
- Yes
- Rechargable battery
- Yes
- Remote control on ear cups?
- Yes
- Speed charge
- Yes
- TalkThru
- Yes
- Wireless
- Yes
Press play, mute distractions.
In your world, music is essential, so slip on a pair of JBL Live 660NC and elevate your day. Blasting powerful 40mm drivers, the JBL Live 660NC headphones deliver JBL Signature Sound punctuated with enhanced bass, so every track pops. And when the music is the only thing that matters, the Adaptive Noise Cancelling technology allows you to block-out ambient sounds so nothing disturbs your groove. Ambient Aware keeps you safe while walking in the streets with your music on and TalkThru allows you to have quick chats without removing your JBL Live 660NC. Need some help getting through the day? Get help from Hey Google (*) or Alexa (**) through your voice or with a tap on the earcup. Activate ANC or Ambient Aware, check the battery life or power off your JBL Live 660NC simply with your voice with Hey Google (*). Magic! Lightweight and comfortable thanks to the pillow-soft padded headband, you’ll enjoy up to 50 hours of music streaming with ANC off, perfect stereo calls and a convenient detachable audio cable, that lets you rock on even when the battery goes off. When not in use, your Live 660NC automatically pause and resume playing when picked up again. Rock out while staying tuned in with the JBL Live 660 NC headphones. (*) Only supported on Android. (**) Android 6.0 or higher is required for full access to Alexa features when using this device.
FAQs & How-Tos
-
The way you remove and change the ear cushions on your headphones varies from on-ear headphones to over-ear headphones and also from product to product.
When removing and replacing the ear pads you will see the following examples:
Removing on-ear headphones
Pull the ear cushion as you see on the below picture.
The ear cushion will slide out of the hole when you have pulled it enough, which is the case with the picture below.
When the earpad is completely removed it will look like the picture below.
Removing over-ear headphones
Pull the entire earpad off. You need to pull the material that is placed on your ear. Pull carefully so the plastic hooks does not snap off or break. When you have pulled the earpad of it will look like the picture below.
Replacing new on-ear earpads
Align the cushion with the hole all the way around the ear pads.
Replacing new over-ear earpads
Align the plastic hooks which are marked on the left side on the picture below with the holes that are marked on the right side of the picture.
Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.
You can change the default assistant in the ‘My JBL Headphones’ app:- Open the My JBL Headphones app on your device.
- Select the headphones you are connected too.
- Go to Settings by clicking the symbol in the top right corner.
- Select Voice Assistant.
- Now you can select your preferred voice assistant.
Your headphones may restart after switching Voice Assistant.Was this helpful? Thank you for your feedback! -
After setting up Amazon Alexa on your headphones through the My JBL Headphones app, use Amazon Alexa by pressing & holding the touch panel for 2 seconds on the earbud that you have enabled the voice assistant feature on.
Things to try- “What’s the weather?”
- Play Niall Horan
- Play NPR on iHeartRadio
- Set a timer for 5 minutes
- What new skills do you have?
While Alexa is talking, press and release the Action button then say “Stop”.
For more information and things to try with Alexa, visit: www.amazon.com/alexadevicesWas this helpful? Thank you for your feedback! -
After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.
Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: https://assistant.google.com/platforms/phones/#headphones
Get your notifications
Double-tap the Action button.
Stop your Google Assistant
Touch the Action button.
Reply to the message (where available)
After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.
For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones
Was this helpful? Thank you for your feedback! -
This headphone is supported by the My JBL Headphones App.Was this helpful? Thank you for your feedback!
-
First, ensure that you have the Google Assistant or Amazon Alexa apps installed on your device, depending on the voice assistant you want to use. Go to your app store to download the intended voice assistant app, then add your headphones as a device in the app if necessary. Finally, enable the intended voice assistant in the settings of the My JBL Headphones app and assign which earbud you want to use to control it. The voice assistant app must be open for it to work correctly. It can be opened from within the My JBL Headphones app by tapping the name of the required voice assistant after you have selected it for use and assigned a gesture to one of your earbuds to control it.Was this helpful? Thank you for your feedback!
-
If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.
https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1Was this helpful? Thank you for your feedback!
