JBL Live Pro+ TWS
True wireless Noise Cancelling earbuds
Sold from 2020 until now
Getting started with your JBL Live Pro+ TWS
Documents & Downloads
Product Specifications
- Driver size (mm)
- 11
- Driver sensitivity at 1kHz/1mW (dB)
- 102
- Dynamic frequency response range (Hz)
- 20 Hz – 20 kHz
- Impedance (ohms)
- 16
- Number of drivers per ear
- 1
- Charging Case Weight (g)
- 49.5
- Charging Case Weight (oz)
- 1.7
- Earpiece Weight (g)
- 10
- Earpiece Weight (oz)
- 0.4
- Bluetooth profiles
- A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth frequency
- 2.4 GHz – 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4DQPSK, 8DPSK
- Bluetooth transmitter power
- 0 - 13dbm
- Bluetooth version
- 5.0
- Charging case battery life (max hours)
- 21
- Charging time (hours from empty)
- 2
- Maximum music play time with ANC off (hours)
- 7
- Maximum music play time with ANC on (hours)
- 6
- Maximum play time (hours)
- 7
- Bluetooth
- Yes
- Charging cable
- Yes
- Touch Control
- Yes
- Voice Assistant integration
- Yes
- Adaptive Noise Cancelling
- Yes
- Ambient Aware
- Yes
- Built-in Microphone
- Yes
- Charging case
- Yes
- Hands Free Call
- Yes
- JBL Signature Sound
- Yes
- Rechargable battery
- Yes
- Speed charge
- Yes
- Sweat Proof
- Yes
- TalkThru
- Yes
- True Wireless
- Yes
- Wireless
- Yes
- IPX
- IPX4
More music, less noise
The best audio solution not matter the device, JBL Live Pro+ TWS delivers an immersive True Wireless experience with incredible JBL Signature Sound. Let Smart Ambient connect you to your environment, or focus on the music with Adaptive Noise Cancelling. Then switch easily from tunes to group calls with 4 mics (2 beamforming mics per side) to capture your voice with the feeling of face-to-face conversation and a third mic for environmental noise reduction. All commands are on the earbuds, so you can manage music and calls with your finger only. Get help from your Hey Google (*) or Alexa (**) through your voice or with a tap on the earbud. Activate ANC or Ambient Aware, check the battery life or power off your JBL Live Pro+ TWS simply with your voice with Hey Google (*). With up to 28 hours of playtime from Qi-compatible wireless charging and super-fast wireless recharging, they’re always ready to power your day (*) Only supported on Android (**) Android 6.0 or higher is required for full access to Alexa features when using this device.
FAQs & How-Tos
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all TWS earphones and cases.Was this helpful? Thank you for your feedback! -
To perform a hardware reset of your earbuds, press and hold the reset button on the charging case* for more than 5 seconds. This resets the earbuds without restoring the settings to the factory defaults.
* Location
Live 300TWS/Live Pro+ TWS: Inside the charging case between the earbuds.
Live Free NC+/Reflect Mini NC TWS/Reflect Aero: On the back of the charging case, next to the USB-C port.
Club Pro+ TWS: On the bottom of the charging case, next to the USB-C port.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
To speak to our customer service specialist
1800-102-0525
Mon to Sun 10 AM to 7 PM IST